Effect of dynamic recrystallization, LPSO phase, and grain boundary segregation on heterogeneous bimodal microstructure in Mg-9.8Gd-3.5Y-2.0Zn-0.4Zr alloy
Source abstract
Abstract
The formation conditions and influence mechanisms of the heterogeneous bimodal microstructure of Mg-9.8Gd-3.5Y-2.0Zn-0.4Zr alloy were systematically studied by thermal compression experiments in the range of 0.001-1.0 s-1 and 350-500 °C. Combined with the microstructural characterization, the inherent relationships between the grain structure and the deformation parameters are deeply analyzed. The results indicate that heterogeneous bimodal microstructures composed of fine dynamically recrystallized (DRXed) grains with random orientation and coarsely deformed grains with basal orientation can only be formed under deformation conditions of 40.51 < lnZ < 46.33. This mainly stems from the dominant continuous dynamic recrystallization (CDRX) and particle stimulated nucleation (PSN) mechanisms under this deformation condition. However, dynamic recovery (DRV) and discontinuous dynamic recrystallization (DDRX) dominate isothermal compression process with lnZ > 47.41 and lnZ < 39.74, which eventually lead to unimodal distributions of deformed grains and DRXed grains, respectively. Furthermore, results reveal that deformation parameters have a strong influence on the long-period stacking order (LPSO) phase and grain boundary (GB) segregation. The lamellar LPSO phases and grain boundary co-segregation of Zn, Y, and Gd atoms jointly promote CDRX and inhibit DDRX by preventing GB migration under the condition of 40.51<lnZ<46.33, which is ultimately beneficial to the development of heterogeneous bimodal Mg-Gd-Y-Zn-Zr alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
2. Strain hardening and ductility in a coarse-grain/nanostructure laminate material10.1016/j.scriptamat.2015.03.006 ↗
3. Extra strengthening and work hardening in gradient nanotwinned metals10.1126/science.aau1925 ↗
4. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper10.1126/science.1200177 ↗
5. Deformation behavior of bimodal nanostructured 5083 Al alloys10.1007/s11661-005-0289-7 ↗
6. Strain rate dependence of properties of cryomilled bimodal 5083 Al alloys10.1016/j.actamat.2006.02.045 ↗
7. High tensile ductility and strength in bulk nanostructured nickel10.1002/adma.200800214 ↗
8. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
9. Plastic deformation and fracture of ultrafine-grained Al-Mg alloys with a bimodal grain size distribution10.1016/j.actamat.2005.11.044 ↗
10. Effect of bimodal microstructure on texture evolution and mechanical properties of 1050 Al alloy processed through severe plastic deformation and subsequent annealing10.1016/j.msea.2021.141580 ↗
11. High ductility bulk nanostructured Al-Mg binary alloy processed by equal channel angular pressing and inter-pass annealing10.1016/j.scriptamat.2015.04.018 ↗
12. Controllable bimodal structures in hypo-eutectoid Cu-Al alloy for both high strength and tensile ductility10.1016/j.msea.2008.03.002 ↗
13. High strength and ductile ultrafine-grained Cu-Ag alloy through bimodal grain size, dislocation density and solute distribution10.1016/j.actamat.2012.09.053 ↗
14. Effect of heterostructure and hetero-deformation induced hardening on the strength and ductility of brass10.1016/j.actamat.2020.01.037 ↗
15. Experimental and numerical investigations of plastic strain mechanisms of AISI 316L alloys with bimodal grain size distribution10.1016/j.ijplas.2022.103246 ↗
16. Tensile properties of spark plasma sintered AISI 316L stainless steel with unimodal and bimodal grain size distributions10.1016/j.msea.2018.05.064 ↗
17. Achieving high strength and high ductility in 304 stainless steel through bi-modal microstructure prepared by post-ECAP annealing10.1016/j.msea.2016.11.004 ↗
18. Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics10.1016/j.msea.2014.01.023 ↗
19. Importance of bimodal structure topology in the control of mechanical properties of a stainless steel10.1002/adem.201400358 ↗
20. The role of bimodal-grained structure in strengthening tensile strength and decreasing yield asymmetry of Mg-Gd-Zn-Zr alloys10.1016/j.msea.2017.09.125 ↗
21. Strong and ductile AZ31 Mg alloy with a layered bimodal structure
22. The synergy effect of fine and coarse grains on enhanced ductility of bimodal-structured Mg alloys10.1016/j.jallcom.2018.11.229 ↗
23. A superplastic bimodal grain-structured Mg-9Al-1Zn alloy processed by short-process hard-plate rolling10.1016/j.mtla.2019.100443 ↗
24. Mechanical properties and deformation mechanism of Mg-Al-Zn alloy with gradient microstructure in grain size and orientation10.1016/j.msea.2017.04.005 ↗
25. Ultra high-strength Mg-Gd-Y-Zn-Zr alloy sheets processed by large-strain hot rolling and ageing10.1016/j.msea.2012.03.087 ↗
26. High strength and ductility Mg-8Gd-3Y-0.5Zr alloy with bimodal structure and nano-precipitates10.1016/j.jmst.2019.10.024 ↗
27. Fabrication of extraordinary high-strength magnesium alloy by hot extrusion10.1016/j.scriptamat.2009.06.003 ↗
28. Deformation and fracture mechanisms of an annealing-tailored "bimodal" grain-structured Mg alloy10.1016/j.jmst.2019.06.008 ↗
29. Heterogeneous bimodal microstructure and its formation mechanism of Mg-Gd-Y-Zn-Zr alloy during isothermal compression10.1016/j.jallcom.2023.169523 ↗
30. Formation of 14H long period stacking ordered structure and profuse stacking faults in Mg-Zn-Gd alloys during isothermal aging at high temperature10.1016/j.actamat.2007.08.033 ↗
31. Ageing behavior and mechanisms of strengthening and toughening of ultrahigh-strength Mg-Gd-Y-Zn-Mn alloy10.1016/j.msea.2019.05.005 ↗
32. Phase equilibria and transformations in ternary Mg-rich Mg-Y-Zn alloys10.1016/j.actamat.2012.05.035 ↗
33. Microstructure and mechanical properties of large-scale Mg-Gd-Y-Zn-Mn alloys prepared through semi-continuous casting10.1016/j.jmst.2020.04.013 ↗
34. Dynamic recrystallization and precipitation behavior of a novel Sc, Zr alloyed Al-Zn-Mg-Cu alloy during hot deformation
35. Characterization of hot workability in AA 7050 aluminum alloy using activation energy and 3-D processing map10.1016/j.jmatprotec.2015.05.018 ↗
36. The Avrami kinetics of dynamic recrystallization10.1016/j.actamat.2009.02.033 ↗
37. Characterization of hot deformation behavior of as-extruded Mg-Gd-Y-Zn-Zr alloy10.1016/j.jallcom.2014.04.210 ↗
38. Dynamic recrystallization of a wrought magnesium alloy: grain size and texture maps and their application for mechanical behavior predictions10.1016/j.matdes.2021.109562 ↗
39. A high-performance Mg-4.9Gd-3.2Y-1.1Zn-0.5Zr alloy via multidirectional forging after analyzing its compression behavior10.1016/j.jmst.2020.08.054 ↗
40. Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression10.1016/j.matchar.2018.08.028 ↗
41. Effect of the Zener-Hollomon parameter on the dynamic recrystallization kinetics of Mg-Zn-Zr-Yb magnesium alloy10.1016/j.commatsci.2019.05.015 ↗
42. Artificial neural network modified constitutive descriptions for hot deformation and kinetic models for dynamic recrystallization of novel AZE311 and AZX311 alloys10.1016/j.msea.2021.141259 ↗
43. Microstructure evolution, texture and mechanical properties of a Mg-Gd-Y-Zn-Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: the influence of passes and processing route10.1016/j.jma.2020.06.016 ↗
44. Deformation mechanism of Mg-Gd-Y-Zn-Zr alloy containing long-period stacking ordered phases during hot rolling10.1007/s11661-020-05667-7 ↗
45. Dynamic recrystallization behaviors of Mg-Gd-Y-Zn-Zr alloy with different morphologies and distributions of LPSO phases10.1016/j.msea.2017.12.103 ↗
46. Hot deformation behavior of Mg-5Li-3Al-2Zn-0.2Zr alloy based on constitutive analysis, processing map, and microstructure evolution10.1016/j.jallcom.2023.168983 ↗
47. Critical resolved shear stresses for slip and twinning in Mg-Y-Ca alloys and their effect on the ductility10.1016/j.ijplas.2023.103525 ↗
48. Large plasticity in magnesium mediated by pyramidal dislocations10.1126/science.aaw2843 ↗
49. Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals10.1016/j.scriptamat.2010.05.047 ↗
50. Bettles · 2012
51. Twinning effects on the hot deformation behavior of AZ31 Mg alloy10.1016/j.matchar.2016.06.014 ↗
52. The texture and its optimization in magnesium alloy10.1016/j.jmst.2019.10.010 ↗
53. Evolution of long-period stacking ordered phases and their effect on recrystallization in extruded Mg-Gd-Y-Zn-Zr alloy during annealing10.1016/j.matchar.2020.110515 ↗
54. Shi G.L., et al. Study on thermal compression deformation behavior and constitutive model of homogenized Mg-5Zn-1Mn alloy10.1016/j.jmrt.2022.11.158 ↗
55. Huang ZQ., et al. Deformation-induced dynamic precipitation of 14H-LPSO structure and its effect on dynamic recrystallization in hot-extruded Mg-Y-Zn alloys10.1016/j.ijplas.2023.103573 ↗
56. Investigation on the microstructure, texture and mechanical properties of Mg-Gd-Y(-Zn)-Zr alloys under indirect extrusion10.1016/j.jallcom.2023.169061 ↗
57. Effects of heat treatment before extrusion on dynamic recrystallization behavior, texture and mechanical properties of as-extruded Mg-Gd-Y-Zn-Zr alloy10.1016/j.msea.2021.142479 ↗
58. Effects of 14H LPSO phase on the dynamic recrystallization and work hardening behaviors of an extruded Mg-Zn-Y-Mn alloy10.1016/j.msea.2020.140727 ↗
59. Evolution of LPSO phases and their effect on dynamic recrystallization in a Mg-Gd-Y-Zn-Zr alloy10.1007/s11661-017-4081-2 ↗
60. Microstructure and mechanical properties of extruded Mg-Gd-Y-Zn-Zr alloys filled with intragranular LPSO phases10.1016/j.matchar.2017.11.027 ↗
61. Effects of LPSO/alpha-Mg interfaces on dynamic recrystallization behavior of Mg96.5Gd2.5Zn1 alloy10.1016/j.matchar.2017.10.028 ↗
62. A two-step dynamic recrystallization induced by LPSO phases and its impact on mechanical property of severe plastic deformation processed Mg97Y2Zn1 alloy10.1016/j.jallcom.2017.02.107 ↗
63. Role of RE in the deformation and recrystallization of Mg alloy and a new alloy design concept for Mg-RE alloys10.1016/j.scriptamat.2014.12.010 ↗
64. Designing a magnesium alloy with high strength and high formability
65. Developing a low-alloyed fine-grained Mg alloy with high strength-ductility based on dislocation evolution and grain boundary segregation10.1016/j.scriptamat.2021.114414 ↗
66. Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium10.1016/j.scriptamat.2011.08.012 ↗
67. Texture weakening and static recrystallization in rolled Mg-2.9Y and Mg-2.9Zn solid solution alloys10.1007/s10853-012-6440-0 ↗
68. Atom probe tomography of solute distributions in Mg-based alloys10.1007/s11661-009-9937-7 ↗