Influence of process parameters and heat treatment on self-piercing riveting of high-strength steel and die-casting aluminium
Source abstract
Abstract
The application of steel/die-casting aluminum alloy is an inevitable trend in the development of automotive lightweight technology. The joining process of self-piercing riveting (SPR) is the key technology to guarantee the collision safety for the body. However, the crackings on joint button can be easily found owing to the low ductility of die-casting aluminum. This paper aims to investigate cracking mechanism and improve the SPR joinability by exploring methods of cracking inhibition. Parametric study is performed to explore the effects of heat treatment, process parameters on crack inhibition and forming quality of SPR with steel/die aluminum alloy. The results show that SPR joinability can be improved by larger elongation and lower yield strength by proper heat treatments, i.e., AlSi10MnMg-T6 and AlSi10MnMg-T7. Meanwhile, the depth and diameter of the die are the main factors affecting cracking generation and forming quality. Similar to the upsetting process, tangential tensile stress is generated on the bottom surface in the riveting process, it leads to cracking generation on the bottom surface. This paper further studies the effects of heat treatment and stack direction on joint quality and mechanical response of SPR joints. Tearing failure of the lower sheet is the main factor causing failure of steel-aluminium joint (steel is the top sheet). The heat treatment mainly affects the energy absorption value and has a relatively small effect on the peak force. The mechanical properties of the steel-aluminium joints are superior to those of aluminium-steel joints (aluminium is the top sheet).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. An efficient lightweight design strategy for body-in-white based on implicit parameterization technique10.1007/s00158-016-1621-0 ↗
2. Effect of high pressure die casting on the castability, defects and mechanical properties of aluminium alloys in extra-large thin-wall castings10.1016/j.jmatprotec.2022.117525 ↗
3. Influence of resistance heating on self-piercing riveted dissimilar joints of AA6061-T6 and galvanized DP59010.1016/j.jmatprotec.2014.03.006 ↗
4. Self-piercing riveting-a review10.1007/s00170-017-0156-x ↗
5. Performance optimization of self-piercing rivets through analytical rivet strength estimation10.1016/S1526-6125(05)70085-2 ↗
6. Quality prediction and rivet/die selection for SPR joints with artificial neural network and genetic algorithm10.1016/j.jmapro.2021.04.033 ↗
7. Study on the effect of rivet die parameters on joint quality of self-piercing riveting employed 3D modeling and MCDM method10.1007/s00170-022-08759-3 ↗
8. Analysis of joint formation mechanisms for self-piercing riveting (SPR) process with varying joining parameters10.1016/j.jmapro.2021.11.038 ↗
9. An experimental and numerical investigation of the role of rivet and die design on the self-piercing riveting joint characteristics of aluminum and steel sheets10.1016/j.jmapro.2021.07.049 ↗
10. Effects of the die parameters on the self-piercing riveting process10.1007/s00170-019-04567-4 ↗
11. Numerical simulation and parametric study on self-piercing riveting process of aluminium-steel hybrid sheets10.1016/j.tws.2021.107872 ↗
12. Experimental and numerical investigations of aluminium-steel self-piercing riveted joints under quasi-static and dynamic loadings10.1016/j.tws.2021.108277 ↗
13. Quasi-static and fatigue characteristics of self-piercing riveted joints in dissimilar aluminium-lithium alloy and titanium sheets10.1016/j.jmrt.2020.03.095 ↗
14. A crack detection and evaluation method for self-piercing riveting
15. Overview of current challenges in self-pierce riveting of lightweight materials
16. Crack detection and evaluation method for self-piercing riveting button images based on BP neural network
17. An overview of self-piercing riveting process with focus on joint failures, corrosion issues and optimisation techniques10.1186/s10033-020-00526-3 ↗
18. Zhao · 2019
19. Influence of die profiles and cracks on joint buttons on the joint quality and mechanical strengths of high strength aluminium alloy joint10.4028/www.scientific.net/AMR.548.398 ↗
20. Mechanical joining of materials with limited ductility: analysis of process-induced defects10.1063/1.5008136 ↗
21. Joining suitability of cast aluminium for self-piercing riveting10.1088/1757-899X/1157/1/012005 ↗
22. Mechanical properties and joinability of AlSi9 alloy manufactured by twin-roll casting10.1002/adem.202200874 ↗
23. Joining magnesium die casting using self-piercing riveting with a rivet receiver
24. New die concept for self-pierce riveting materials with limited ductility10.4028/www.scientific.net/KEM.611-612.1452 ↗
25. Friction self-piercing riveting (F-SPR) of aluminum alloy to magnesium alloy using a flat die10.1016/j.jma.2020.12.016 ↗
26. Friction self-piercing riveting of aluminum alloy AA6061-T6 to magnesium alloy AZ31B10.1115/1.4025421 ↗
27. Combined strengthening mechanism of solid-state bonding and mechanical interlocking in friction self-piercing riveted AA7075-T6 aluminum alloy joints10.1016/j.jmst.2021.07.026 ↗
28. Review on joining processes of magnesium alloy sheets10.1007/s00170-021-07981-9 ↗
29. Effects of process parameters on crack inhibition and mechanical interlocking in friction self-piercing riveting of aluminum alloy and magnesium alloy
30. Laser assisted self-pierce riveting of AZ31 magnesium alloy strips10.1016/j.matdes.2009.10.038 ↗
31. Thermally assisted self-piercing riveting of aluminum AA6061-T6 to ultra-high strength steels
32. A comparative study of self-piercing riveting and friction self-piercing riveting of cast aluminum alloy Al–Si7Mg
33. Self-piercing riveting of medium-and high-strength Al and Mg alloy sheets enabled by in-process electric resistance heating10.1115/1.4048855 ↗
34. Thermally assisted self-piercing riveting of AA6061-T6 to ultrahigh strength steel10.1115/1.4044255 ↗
35. Mallick · 2020
36. The effect of heat treatment on die casting aluminum to apply self-pierce riveting10.1007/s00170-020-05833-6 ↗
37. Clinching of heated aluminum die casting
38. Quality of self-piercing riveting (SPR) joints from cross-sectional perspective: a review10.1016/j.acme.2017.06.003 ↗
39. Improved shear strength design of cold-formed steel connection with single self-piercing rivet10.1016/j.tws.2018.03.025 ↗
40. The effect of setting velocity on the static and fatigue strengths of self-piercing riveted joints for automotive applications
41. Effect of setting velocity on self-piercing riveting process and joint behaviour for automotive applications10.4271/2010-01-0966 ↗
42. Modelling and interaction analysis of the self-pierce riveting process using regression analysis and FEA10.1007/s00170-020-06519-9 ↗
43. Effect of rivet and die on self-piercing rivetability of AA6061-T6 and mild steel CR4 of different gauges10.1016/j.jmatprotec.2017.08.020 ↗
44. Strain in the upsetting process10.7494/mafe.2007.33.1.51 ↗
45. Effect of surface roughness on friction coefficients during upsetting processes for different materials10.1016/j.matdes.2005.07.019 ↗
46. An investigation of die-workpiece interface friction during the upsetting process10.1016/0924-0136(94)01776-X ↗
47. Numerical simulation and experimental verification of microstructure evolution in a three-dimensional hot upsetting process10.1016/j.jmatprotec.2008.10.036 ↗
48. Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process10.1016/j.commatsci.2008.03.010 ↗
49. Development of analytical strength estimator for self-piercing rivet joints through observation of finite element simulations
50. Effect of shot peening on static and fatigue properties of self-piercing riveting joints10.1016/j.jmrt.2022.03.031 ↗