Effect of common alloying elements on α’ martensite start temperature in titanium alloys
Source abstract
Abstract
Accurate prediction of the martensitic start (Ms) temperature is critical for controlling the β to α’ phase transformation process in titanium alloys. Based on the Galindo-Nava’s model, the changes in Ms temperature for common Ti-X binary titanium alloys and Ti-Al-V-O systems with varying contents of alloying elements have been predicted in this work. The main results are as follows: The profiles of Ms and Tβ are consistent for different alloying elements, and the difference between Ms and Tβ is larger for alloying elements with higher substitutional strain energy. As the α phase stabilizing element content increases, the Ms point of the alloy raises, while it decreases for increasing β phase stabilizing element. Moreover, the effect of Al on Ms is stronger compared to that of V. It is worth mentioning that the metastability of the β phase at high temperature is the main factor determining Ms. Additionally, the substitutional strain energy contributed by Al is about two orders of magnitude higher than that of V, or the interstitial strain energy of (per 0.05 wt%) O. The present calculations are in good agreement with certain experimental results. The findings provide valuable insights into understanding and controlling the process of β to α’ phase transformation, and they would offer guidance for component design and optimization of titanium alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Recent progress in the simulation of microstructure evolution in titanium alloys10.1016/j.pnsc.2019.05.006 ↗
2. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
3. Lütjering · 2007
4. Effect of α' martensite on microstructure refinement after α+β isothermal treatment in a near-α titanium alloy Ti6010.1007/s11665-015-1486-1 ↗
5. Strong and ductile titanium-oxygen-iron alloys by additive manufacturing10.1038/s41586-023-05952-6 ↗
6. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
7. The effect of metastability on room temperature deformation behavior of β and α+β titanium alloys10.1007/s10853-009-4178-0 ↗
8. Alloys-by-design: a low-modulus titanium alloy for additively manufactured biomedical implants10.1016/j.actamat.2022.117749 ↗
9. Prediction of the martensite start temperature for β titanium alloys as a function of composition10.1016/j.scriptamat.2008.12.034 ↗
10. Thermodynamics of the Ms points in titanium alloys
11. The effect of cooling rate on the beta transformation in titanium-niobium and titanium-aluminium alloys
12. The endless search for better alloys10.1126/science.ade5503 ↗
13. Kinetics of F.C.C.→B.C.C. heterogeneous martensitic nucleation—I. The critical driving force for athermal nucleation10.1016/0956-7151(94)90468-5 ↗
14. Modelling martensitic transformation in titanium alloys: the influence of temperature and deformation10.1016/j.mtla.2019.100382 ↗
15. Alloy design by tailoring phase stability in commercial Ti alloys10.1016/j.msea.2021.141229 ↗
16. On the prediction of martensite formation in metals10.1016/j.scriptamat.2017.05.026 ↗
17. Refinement of α' martensite by oxygen in selective laser melted Ti-6Al-4V
18. Martensite formation in titanium alloys: crystallographic and compositional effects10.1016/j.jallcom.2021.159636 ↗
19. Martensitic transformation from β to α' and α'' phases in Ti-V alloys: a first-principles study10.1557/jmr.2017.276 ↗
20. Temperature dependence of Young's modulus of α-titanium polycrystals10.1002/pssa.2211430238 ↗
21. Haynes · 2016
22. Banerjee · 2007
23. Phase field simulation of the stress-induced α microstructure in Ti-6Al-4V alloy and its CPFEM properties evaluation10.1016/j.jmst.2020.12.085 ↗
24. Phase-field study on the formation of α variant clusters induced by elastoplastic stress field around the void in titanium alloys10.1016/j.commatsci.2022.111781 ↗
25. On the existence of orthorhombic martensite in a near-α titanium base alloy used for additive manufacturing10.1016/j.jallcom.2021.163155 ↗
26. Duwez · 1952
27. Martensitic transformations in Ti-Mo alloys10.1007/BF00772735 ↗
28. Laser additive manufacturing of titanium alloys with various Al contents10.1080/21663831.2023.2165418 ↗
29. The influence of oxygen on the chemical composition and mechanical properties of Ti-6Al-4V during laser powder bed fusion (L-PBF)
30. Phase transformations during cooling in α+β titanium alloys10.1016/S0921-5093(97)00802-2 ↗
31. Phase transformation dynamics during welding of Ti-6Al-4V10.1063/1.1737476 ↗
32. In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction10.1038/s41598-017-16760-0 ↗
33. Elements, Atomic Radii and the Periodic Table, https://crystalmaker.com/support/tutorials/atomic-radii/index.html.
34. Weigand · Zur Umwandlung von α+β - Titanlegierungen mit Aluminium · 1963 · 54 · 43
35. A new concept for modeling phase transformations in Ti6Al4V alloy manufactured by directed energy deposition10.3390/ma14112985 ↗