In-situ synthesized a dual-scale Ti2AlC reinforced TiAl composites with superior mechanical properties
Source abstract
Abstract
To enhance the mechanical properties and service temperature of TiAl alloy, the dual-scale Ti2AlC particles reinforced TiAl composites were successfully designed and fabricated by spark plasma sintering (SPS), utilizing pre-alloyed Ti–48Al–2Nb–2Cr powder and multi-walled carbon nanotubes. The TiAl composites exhibited a fully lamellar structure, with micro-laminated Ti2AlC particles formed at grain boundaries and nano-laminated Ti2AlC particles precipitated at the interfaces of α2 and γ lamellae by adding 0.5 wt% multi-walled carbon nanotubes. The TiAl composites exhibited excellent mechanical properties at room temperature and elevated temperatures. The ultrahigh tensile strength of TiAl composite was 599.6 MPa at 800 °C which was improved by 28.3 % compared with TiAl matrix, while the fracture strain remained 4.2 % without sacrifice. These superior mechanical properties were mainly attributed to the refinement strengthening, solid solution strengthening, and the formation of dual-scale Ti2AlC particles. Moreover, the dual-scale Ti2AlC particles reinforced α2 and γ lamellar interfaces and lamellar colony boundaries resulting in improvement of strength and toughness simultaneously. The TiAl composite was reinforced by dual-scale Ti2AlC particles, which expected to further break the property limitation of TiAl alloy and expanded its application at high temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Recent researches of the bio-inspired nano-carbon reinforced metal matrix composites10.1016/j.compositesa.2020.105816 ↗
2. Multiscale architecture and superior high-temperature performance of discontinuously reinforced titanium matrix composites
3. Synergetic enhancement of strength and ductility for titanium-based composites reinforced with nickel metallized multi-walled carbon nanotubes10.1016/j.carbon.2021.08.030 ↗
4. Superior strength–ductility synergy of (TiC + Ti5Si3)/Ti composites with nacre-inspired architecture10.1016/j.compositesb.2022.109991 ↗
5. Novel laminated multi-layer graphene/Cu–Al–Mn composites with ultrahigh damping capacity and superior tensile mechanical properties10.1016/j.carbon.2021.11.055 ↗
6. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
7. Enhanced high-temperature tensile property by gradient twin structure of duplex high-Nb-containing TiAl alloy10.1016/j.actamat.2018.09.007 ↗
8. Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures10.1016/j.actamat.2017.02.050 ↗
9. Continuous-cooling-transformation (CCT) behaviors and fine-Grained nearly lamellar (FGNL) microstructure formation in a cast Ti-48Al-4Nb-2Cr alloy
10. Evading the strength-ductility trade-off at room temperature and achieving ultrahigh plasticity at 800 °C in a TiAl alloy10.1016/j.actamat.2021.117585 ↗
11. Microstructure and mechanical properties of Ti–45Al–2W–xC alloys10.1016/j.intermet.2022.107618 ↗
12. Balancing the strength and ductility of Ti2AlC/TiAl composite with a bioinspired micro-nano laminated architecture10.1016/j.matdes.2022.110851 ↗
13. The effects of the formation of a multi-scale reinforcing phase on the microstructure evolution and mechanical properties of a Ti2AlC/TiAl alloy10.1039/D1NR02435C ↗
14. Effects of trace alloying elements on the phase transformation behaviors of ordered ω phases in high Nb-TiAl alloys10.1016/j.matdes.2016.10.004 ↗
15. Structural and mechanical properties of Ti–Al–Nb–Mo–B alloy produced from the SHS powder subjected to high-energy ball milling10.1016/j.msea.2021.141153 ↗
16. Enhanced strength and ductility in Ti46Al4Nb1Mo alloys via boron addition10.1016/j.jmst.2021.06.037 ↗
17. The influence of micro-nano Ti2AlC on the hot deformation behavior of TiAl alloys10.1016/j.intermet.2022.107676 ↗
18. Tribological behaviors of in situ TiB2 ceramic reinforced TiAl-based composites under sea water environment10.1016/j.ceramint.2016.12.075 ↗
19. Microstructure and compression behavior of in-situ synthesized Ti2AlC reinforced Ti-48Al-2Cr alloy with carbon nanotubes addition10.1016/j.jallcom.2021.158646 ↗
20. Effect of carbon addition and cooling rate on lamellar structure of peritectic TiAl-based alloy10.1016/j.intermet.2020.107007 ↗
21. Microstructural configuration and compressive deformation behavior of a TiAl composite reinforced by Mn and in situ Ti2AlC particles10.1016/j.msea.2021.141772 ↗
22. In situ synthesis of nano/micron Ti2AlC reinforced high-Nb TiAl composites: microstructure and mechanical properties10.1016/j.intermet.2023.107937 ↗
23. Study on interface reaction between multilayer graphene and TiAl alloy10.1016/j.matlet.2021.131515 ↗
24. Effect of spark plasma sintering temperature on the multi-scale microstructure evolution and mechanical properties of Ti2AlC/TiAl composites with network architecture10.1016/j.jmrt.2023.07.090 ↗
25. Microstructure and mechanical properties of micro-nano Ti2AlC-reinforced TiAl composites10.1016/j.intermet.2022.107563 ↗
26. Achieving superior high-temperature strength and Oxidation resistance of TiAl Nanocomposite through in situ Semicoherent MAX phase precipitation10.1021/acsami.1c21719 ↗
27. Jiang Q.C.Compressive properties and workhardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti-Al-Nb-C system10.1016/j.matdes.2011.05.041 ↗
28. Phase transitions and compression properties of Ti2AlC/TiAl composites fabricated by combustion synthesis reaction10.1016/j.msea.2012.01.108 ↗
29. Comparative study of the compression properties of TiAl matrix composites reinforced with nano-TiB2 and nano-Ti5Si3 particles10.1016/j.msea.2012.10.001 ↗
30. Elevated temperature compressive deformation behaviors of γ-TiAl-based Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting10.1016/j.intermet.2020.106859 ↗
31. Fabrication and mechanical properties of Ti2AlC/TiAl composites with co-continuous network structure10.1016/S1003-6326(21)65633-9 ↗
32. Mechanical, tribological and electrochemical corrosion properties of in-situ synthesized Al2O3/TiAl composites10.1016/j.intermet.2020.106758 ↗
33. Anisotropy of microstructure and tensile properties of Ti–48Al–2Cr–2Nb fabricated by electron beam melting10.1016/j.jallcom.2020.154684 ↗
34. Electron beam melting of Ti–48Al–2Cr–2Nb alloy: microstructure and mechanical properties investigation10.1016/j.intermet.2010.11.017 ↗
35. Microstructure characteristics and failure mechanisms of Ti-48Al-2Nb-2Cr titanium aluminide intermetallic alloy fabricated by directed energy deposition technique
36. Effects of Tantalum on the microstructure and properties of Ti-48Al-2Cr-2Nb alloy fabricated via laser additive manufacturing10.1016/j.matchar.2021.111317 ↗
37. Microstructure evolution and tensile properties of conventional cast TiAl-based alloy with trace Ni addition10.1016/j.msea.2017.12.092 ↗
38. Twin-wire directed energy deposition-arc of Ti–48Al–2Cr–2Nb alloy: Feasibility, microstructure, and tensile property investigation10.1016/j.msea.2022.143566 ↗
39. Microstructure evolution and tensile properties of conventional cast TiAl-based alloy with trace Ni addition10.1016/j.msea.2017.12.092 ↗
40. Variations of microstructure and tensile property of γ-TiAl alloys with 0–0.5 at% C additives10.1016/j.msea.2017.06.019 ↗
41. Enhanced high temperature tensile and creep properties of a β-solidified γ-TiAl alloy with the hybrid addition of C and Y2O310.1016/j.intermet.2022.107698 ↗
42. High-temperature tensile behaviors and microstructural evolutions of a directionally solidified Ti–45Al–5Nb–2Mn alloy10.1016/j.msea.2021.141904 ↗
43. Microstructure evolution and fracture mechanism of a TiAl–Nb alloy during high-temperature tensile testing10.1016/j.msea.2021.142094 ↗
44. High temperature tensile properties and fracture behavior of Y2O3-bearing Ti-48Al-2Cr-2Nb alloy10.1016/j.intermet.2020.106933 ↗
45. High temperature mechanical behavior of Ti-45Al-8Nb and its cavity evolution in deformation10.1007/s11665-015-1676-x ↗
46. Microstructure and mechanical properties of carbon nanotubes reinforced titanium matrix composites fabricated via spark plasma sintering10.1016/j.msea.2017.02.019 ↗
47. Effect of grain size and temperature on the yield stress of the intermetallic compound TiAl10.1016/0036-9748(89)90434-1 ↗
48. Carbon content driven high temperature γ-α2 interface modifications and stability in Ti-46Al-4Nb intermetallic alloy10.1016/j.intermet.2020.106718 ↗
49. Superior strength-plasticity synergy in a heterogeneous lamellar Ti2AlC/TiAl composite with unique interfacial microstructure10.1016/j.jmst.2023.03.011 ↗
50. Non-classical crystallographic slip in a ternary carbide–Ti2AlC10.1080/21663831.2020.1748733 ↗