Heterostructures impacting deformation strengthening processes in QP steels: Investigating the interplay of grain rotation, slip transfer, and back stress strengthening
Source abstract
Abstract
QP (Quenching and Partitioning) steel, the third generation of advanced high-strength steel, has garnered significant attention due to its exceptional mechanical performance. This paper investigates the interplay of grain rotation, slip transfer, and back stress strengthening through quasi in-situ deformation scanning electron microscope (SEM), electron backscatter diffraction (EBSD), and load-unload-reload (LUR) cycle tests. The findings reveal the substantial differences between QP980 and QP1180. QP980, characterized by heterostructures, exhibits non-uniform deformation characteristics. In regions with heterostructures, grain rotation inhibits slip transfer, leading to the accumulation of geometrically necessary dislocations (GNDs) and the formation of dislocation substructures (walls and cells), resulting in significant back stress strengthening. Conversely, due to the lack of heterogeneous structural regions, QP1180 displays uniform deformation characteristics, grain rotation and slip transfer promote each other, showing a weaker and different back stress strengthening compared to QP980. The interplay of grain rotation, slip transmission, and dislocation substructure formation influences the back stress behavior, impacting the mechanical properties and deformation behavior of the materials. This research provides a novel perspective on plastic deformation and strengthening theory, and serves as a valuable reference for material design and performance optimization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Characteristics of bainitic transformation and its effects on the mechanical properties in quenching and partitioning steels10.1016/j.msea.2020.140706 ↗
2. Quantitative assessment of retained austenite in quenching and partitioning treated multiphase steel10.1080/02670836.2015.1137166 ↗
3. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗
4. Analysis of hydrogen trapping behaviour in plastically deformed quenching and partitioning steel in relation to microstructure evolution by phase transformation10.1016/j.jallcom.2022.164018 ↗
5. Evolution mechanisms of microstructure and mechanical properties in a friction stir welded ultrahigh-strength quenching and partitioning steel10.1016/j.jmst.2021.06.031 ↗
6. A new effect of retained austenite on ductility enhancement in high-strength quenching–partitioning–tempering martensitic steel10.1016/j.msea.2011.07.049 ↗
7. Universality of quenching-partitioning-tempering local equilibrium model10.1016/j.jmst.2021.12.021 ↗
8. The dominating role of austenite stability and martensite transformation mechanism on the toughness and ductile-to-brittle-transition temperature of a quenched and partitioned steel10.1016/j.msea.2021.141517 ↗
9. Enhanced carbon enrichment in austenite through introducing pre-existing austenite as a ‘carbon container’ in 0.2C-2Mn steel: the significant impact on microstructure and mechanical properties10.1016/j.matchar.2021.111077 ↗
10. An in situ investigation of neighborhood effects in a ferrite-containing quenching and partitioning steel: mechanical stability, strain partitioning, and damage10.1016/j.actamat.2023.118985 ↗
11. Counter-balancing effects of Si on C partitioning and stacking fault energy of austenite in 10Mn quenching and partitioning steel10.1016/j.jmst.2021.05.027 ↗
12. Examining the multi-scale complexity and the crystallographic hierarchy of isothermally treated bainitic and martensitic structures10.1016/j.matchar.2020.110127 ↗
13. Combined effect of Cu partitioning and nano-size precipitates on improving strength-ductility balance of Cu bearing Q&P steel10.1016/j.matchar.2022.112441 ↗
14. Strain hardening behavior and deformation characteristics of multiphase microstructure in a medium-carbon quenching and partitioning bainitic steel10.1016/j.msea.2017.09.007 ↗
15. On the role of chemical heterogeneity in phase transformations and mechanical behavior of flash annealed quenching & partitioning steels10.1016/j.actamat.2020.10.007 ↗
16. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
17. Dense dispersed shear bands in gradient-structured Ni10.1016/j.ijplas.2019.08.012 ↗
18. Self-equilibrated backstresses induce compensation between hardening and softening: micromechanical and microstructural features10.1016/j.msea.2022.143145 ↗
19. Regulating the recrystallized grain to induce strong cube texture in oriented silicon steel10.1016/j.jmst.2021.03.081 ↗
20. Deformation mechanisms in a β-quenched Ti-5321 alloy: in-situ investigation related to slip activity, orientation evolution and stress induced martensite10.1016/j.jmst.2021.09.051 ↗
21. Effects of surface roughness on interfacial dynamic recrystallization and mechanical properties of Ti-6Al-3Nb-2Zr-1Mo alloy joints produced by hot-compression bonding10.1016/j.jmst.2021.03.085 ↗
22. Grain rotation in plastic deformation10.3390/qubs3030017 ↗
23. In-situ EBSD study of the active slip systems and lattice rotation behavior of surface grains in aluminum alloy during tensile deformation10.1016/j.msea.2013.05.046 ↗
24. On orientation changes accompanying slip and twinning
25. Lattice rotations of individual bulk grains Part II: correlation with initial orientation and model comparison10.1016/j.actamat.2004.02.045 ↗
26. Grain boundaries and interfaces in slip transfer10.1016/j.cossms.2014.05.003 ↗
27. Multiple slip in bicrystal deformation10.1016/0001-6160(57)90044-5 ↗
28. Dislocation and grain boundary interactions in metals10.1016/0001-6160(88)90058-2 ↗
29. Compatibility of deformation in two-phase Ti-Al alloys: dependence on microstructure and orientation relationships10.1007/BF02670762 ↗
30. In situ EBSD/DIC-based investigation of deformation and fracture mechanism in FCC- and L12-structured FeCoNiV high-entropy alloys10.1016/j.ijplas.2022.103247 ↗
31. Experimental determination of deformation induced lattice rotation by EBSD technique for slip system analysis10.1016/j.jmst.2016.01.010 ↗
32. Accurate determination of active slip systems for improved geometrical criteria of basal-to-basal slip transfer at grain boundaries in pure Mg10.1016/j.actamat.2022.118536 ↗
33. In-situ study of adjacent grains slip transfer of Inconel 718 during tensile process at high temperature10.1016/j.ijplas.2023.103554 ↗
34. Revealing slip-induced extension twinning behaviors dominated by micro deformation in a magnesium alloy10.1016/j.ijplas.2020.102669 ↗
35. Strain transfer behavior and crystallographic mechanism of crack initiation during cyclic deformation in zirconium10.1016/j.jmst.2023.03.059 ↗
36. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
37. Characterization of microstructure obtained by quenching and partitioning process in low alloy martensitic steel10.1016/j.msea.2010.02.020 ↗
38. Heat treatment effects on the microstructure and mechanical properties of a medium manganese steel (0.2C–5Mn)10.1016/j.msea.2011.11.009 ↗
39. Study of microstructural evolution, microstructure-mechanical properties correlation and collaborative deformation-transformation behavior of quenching and partitioning (Q&P) steel10.1016/j.msea.2013.12.054 ↗
40. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
41. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum10.1080/14786435608238074 ↗
42. Quantitative investigation on deep hydrogen trapping in tempered martensitic steel10.1016/j.jallcom.2020.157218 ↗
43. EBSD characterization of hydrogen induced blisters and internal cracks in TRIP-assisted steel10.1016/j.matchar.2019.110029 ↗
44. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
45. Characterization and quantification methods of complex BCC matrix microstructures in advanced high strength steels10.1007/s10853-012-6756-9 ↗
46. Leveraging EBSD data by deep learning for bainite, ferrite and martensite segmentation10.1016/j.matchar.2022.111805 ↗
47. Strain mapping near a triple junction in strained Ni-based alloy using EBSD and biaxial nanogauges10.1016/j.actamat.2011.01.051 ↗
48. Hydrogen embrittlement associated with strain localization in a precipitation-hardened Fe–Mn–Al–C light weight austenitic steel10.1016/j.ijhydene.2013.12.171 ↗
49. Ductility by shear band delocalization in the nano-layer of gradient structure10.1080/21663831.2018.1546238 ↗
50. Achieving high strength and ductility in a heterogeneous bimodal grain structured TiC/AZ61 magnesium nanocomposites via powder metallurgy10.1016/j.msea.2022.144344 ↗
51. Modelling the plastic deformation of nanostructured metals with bimodal grain size distribution10.1016/j.ijplas.2011.10.003 ↗
52. In situ EBSD investigation of deformation processes and strain partitioning in bi-modal Ti-6Al-4V using lattice rotations10.1016/j.actamat.2019.04.033 ↗
53. In situ measurement of grain rotation during deformation of polycrystals10.1126/science.1057956 ↗
54. Slip systems extracted from lattice rotations and dislocation structures10.1016/j.actamat.2007.12.026 ↗
55. Lognormal distribution of local strain: a universal law of plastic deformation in material10.1103/PhysRevLett.124.155501 ↗
56. A crystal plasticity investigation of slip system interaction, GND density and stored energy in non-proportional fatigue in Nickel-based superalloy10.1016/j.ijfatigue.2020.105782 ↗
57. Periodic formations of deformation twins and dislocation arrays via grain boundary sliding at serrated grain boundary in cold-shear-strained AZ31 alloy10.1016/j.ijplas.2020.102815 ↗
58. Two-dimensional grain boundary sliding and mantle dislocation accommodation in ODS ferritic steel10.1016/j.actamat.2016.08.034 ↗
59. An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al10.1016/j.ijplas.2019.02.014 ↗
60. The mechanism of slip system activation with grain rotation during superplastic forming10.1115/1.4055779 ↗
61. Review on slip transmission criteria in experiments and crystal plasticity models10.1007/s10853-015-9553-4 ↗
62. On the deformation-induced grain rotations in gradient nano-grained copper based on molecular dynamics simulations10.1515/ntrev-2021-0010 ↗
63. Strengthening mechanisms in high entropy alloys: fundamental issues10.1016/j.scriptamat.2020.06.019 ↗
64. Isotropic and kinematic hardening of a high entropy alloy10.1016/j.scriptamat.2020.09.022 ↗
65. Effective and back stresses evolution upon cycling a high-entropy alloy10.1080/21663831.2022.2054667 ↗
66. Dislocation behavior in fatigue II. Friction stress and back stress as inferred from an analysis of hysteresis loops10.1016/0025-5416(79)90074-0 ↗
67. Dislocations and plastic flow in crystals10.1119/1.1933704 ↗
68. Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys10.1038/s41578-020-0212-2 ↗
69. Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density10.1016/S1359-6454(99)00020-8 ↗
70. Effects of grain size, texture and grain growth capacity gradients on the deformation mechanisms and mechanical properties of gradient nanostructured nickel10.1007/s00707-023-03606-2 ↗
71. Evaluation of strain hardening during uniaxial tensile loading followed by stress relaxation and reloading10.1007/s11661-022-06593-6 ↗
72. Analyses of dislocation effects on plastic deformation10.1007/s42493-020-00037-2 ↗
73. Establishing a quantitative relationship between strain gradient and hetero-deformation-induced stress in gradient-structured metals10.1007/s00707-021-03141-y ↗
74. Dislocation networks and the microstructural origin of strain hardening10.1103/PhysRevLett.121.085501 ↗
75. Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
76. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗