journal article·2024-03Open access

Evolution of mechanical properties of ferrite and pearlite phases during spheroidization process and their relationship to the overall properties of low alloy steel

Yong Jiang, Jinyang Xie, Yujie Xu, Peiheng Qiao, Yilan Lu, Jianming Gong

Abstract

Mechanical properties of ferrite-pearlite low alloy steel are strictly determined by the properties of ferrite and pearlite phases. In this present paper, the evolution of mechanical properties of ferrite and pearlite phases during spheroidization process is investigated by using nanoindentation tests. Meanwhile, the overall mechanical properties of the material were measured using uniaxial tensile tests. Test results indicate that with the intensification of spheroidization of layered cementite in pearlite, the hardness and yield strength of pearlite phase decrease from 2.72 GPa to 1.73 GPa and 411.5 GPa–256.1 GPa, respectively. However, the mechanical properties of ferrite phase exhibit an opposite trend, with hardness and yield strength increasing from 1.6 GPa to 1.67 GPa and 188.1 GPa–208.4 GPa, respectively. Uniaxial tensile tests results indicate that overall yield strength of steel decreases significantly as the degree of spheroidization increases, from the original 276 MPa–229 MPa. Although the strength of pearlite decreased by 38%, the overall strength of alloy steel decreased by only 15% due to an 11% increase in ferrite strength. During spheroidization process, the relationship between pearlite hardness, yield strength, and interlayer spacing of cementite in pearlite can be expressed in Hall-Petch type relationships as: H=0.482×S−12+1.34 and σy=91.44×S−12+149; and the relationship between the strengths of ferrite-pearlite aggregate and ferrite and pearlite phases is σy=Vf1.95σf+(1−Vf1.95)σp.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Influence of microstructure of AH32 corrosion resistant steel on corrosion behavior10.3724/SP.J.1037.2012.00105 ↗
2. Influence of carbide morphology on the deformation and fracture mechanisms of spheroidized 14CrMoR steel10.3390/met9111221 ↗
3. Pearlite spheroidization mechanism and lifetime prediction of 12Cr1MoV steel used in power plant
4. Failure assessment analysis of pipelines for heat and power generating plants according to the SINTAP procedures10.1016/j.ijpvp.2005.06.006 ↗
5. Effect of service-simulated aging on the microstructure and properties of casing casting steel (1CrMoV) vis-à-vis remnant life assessment10.1007/s11661-003-0237-3 ↗
6. Spheroidization behavior of cementite in a high carbon steel10.4028/www.scientific.net/MSF.654-656.150 ↗
7. Micromechanical modeling of ferrite-pearlite steels10.1016/j.msea.2010.07.045 ↗
8. Dislocation-based plasticity and strengthening mechanisms in sub-20 nm lamellar structures in pearlitic steel wire10.1016/j.actamat.2016.04.040 ↗
9. Dynamic studies of the tensile deformation and fracture of pearlite10.1016/0001-6160(78)90156-6 ↗
10. Atom probe and transmission electron microscopy investigations of heavily drawn pearlitic steel wire10.1007/s11661-999-1003-y ↗
11. Mechanical properties and fracture upon static tension of the high-carbon steel with different types of pearlite structure10.1134/S0031918X07110129 ↗
12. Effects of cooling rate and strain rate on phase transformation, microstructure and mechanical behaviour of thermomechanically processed pearlitic steel10.1016/j.jmrt.2019.04.006 ↗
13. Developing very fine nanopearlitic structure in a high carbon steel wire before drawing
14. Mechanical properties and microstructural evolution of T23 heat-resistant steel during aging at 873K
15. Structural microdamageability of steels of the steam pipelines of thermal power plants10.1007/s11003-009-9189-0 ↗
16. Failure assessment analysis of pipelines for heat and power generating plants according to the SINTAP procedures10.1016/j.ijpvp.2005.06.006 ↗
17. Characterization of microstructure and mechanical property evolutions of 42CrMo steel served at Elevated temperatures
18. Mechanical properties of cementite and fabrication of artificial pearlite10.4028/www.scientific.net/MSF.426-432.859 ↗
19. Investigations of the failure in boilers economizer tubes used in power plants10.1007/s11665-013-0567-2 ↗
20. Effect of cyclic heat treatment on microstructure and mechanical properties of 0.6 wt% carbon steel10.1016/j.msea.2010.03.003 ↗
21. The effect of interlamellar spacing on strength of pearlite in annealed eutectoid and hypoeutectoid plain carbon steels10.1016/0956-7151(91)90002-I ↗
22. Novel nanoindentation method for characterising multiphase materials10.1016/S0040-6090(97)00558-0 ↗
23. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
24. Spherical nanoindentation stress–strain curves10.1016/j.mser.2015.02.001 ↗
25. Microstructural features, mechanical properties and high temperature failures of ferritic to ferritic dissimilar welds10.1080/09506608.2017.1410943 ↗
26. A review of nanoindentation continuous stiffness measurement technique and its applications10.1016/S1044-5803(02)00192-4 ↗
27. Application of nanoindentation technique for structural characterisation of weld materials10.1016/S1044-5803(02)00274-7 ↗
28. Development and characterization of Al-based amorphous coating10.1007/s11837-019-03966-y ↗
29. Investigation of mechanical and creep properties of poly pyrrole by depth-sensing indentation Polym
30. An inverse approach for extracting elastic–plastic properties of thin films from small scale sharp indentation10.1016/S1005-0302(12)60108-X ↗
31. Predicting flow curves of two-phase steels from spherical nanoindentation data of constituent phases: Isostrain method vs. non-isostrain method10.1016/j.ijplas.2014.03.013 ↗
32. Effect of carbon migration on mechanical properties of dissimilar weld joint10.1016/j.engfailanal.2020.104935 ↗
33. Gradient elastic–plastic properties of expanded austenite layer in 316L stainless steel10.1007/s40195-018-0710-z ↗
34. Oliver–Pharr indentation method in determining elastic moduli of shape memory alloys—a phase transformable material10.1016/j.jmps.2013.05.007 ↗
35. Zhu · 2013
36. Determination of plastic properties of metals by instrumented indentation using different sharp indenters10.1016/S1359-6454(02)00568-2 ↗
37. Evolution of nano-size precipitation and mechanical properties in a high strength-ductility low alloy steel through intercritical treatment10.1016/j.msea.2017.08.061 ↗
38. Tabor · 2000 · 56
39. Correlation between nanoindentation and tensile properties: influence of the indentation size effect10.1016/S0921-5093(03)00563-X ↗
40. Phase transformation and microstructure evolution of pearlite heat-resistant steel during heating10.1080/02670836.2020.1738071 ↗
41. Microstructure and crystallographic texture changes under torsion loading of pearlitic steel strips10.1007/s11665-020-05232-8 ↗
42. Coarsening of nano sized carbide particles in 2.25 Cr–1Mo power plant steel after extended service10.1016/j.matlet.2004.02.051 ↗
43. Effect of microstructural degradation on solid particle erosion behavior of 2.25 Cr-1Mo steel10.1080/10402004.2014.905669 ↗
44. The effect of controlled cooling after hot rolling on the mechanical properties of a commercial high carbon steel wire rod10.1016/S0261-3069(03)00095-5 ↗
45. Phase-field simulations of pearlitic divergence in Fe-C-Mn steels10.1016/j.actamat.2018.02.059 ↗
46. Some aspects of the structure-property relationships in high-carbon ferrite-pearlite steels
47. The effect of microstructural characteristics of pearlite on the mechanical properties of hypereutectoid steel10.1016/j.msea.2005.05.051 ↗
48. The structure and properties of drawn pearlite10.1016/0001-6160(66)90296-3 ↗
49. Mechanical property change and precipitate evolution during long-term aging of 1.25 Cr-0.5 Mo steel10.1016/j.msea.2020.139663 ↗
50. Gladman · 1983 · 141