journal article·2024-05Open access

Effect of surface high density twin microstructure induced by shot peening on the fatigue behavior of Ti-6Al-4V

Zhiqiang Niu, Haojie Men, Chenglin Wang, Pengtao Gai, Wenlong Zhou, Guoqing Chen, Zheng Fang, Xuesong Fu

Abstract

A detailed analysis of the surface high density twin microstructure and fatigue resistance of the Ti-6Al-4V titanium alloy specimens treated with the different shot peening parameters was conducted, compared with the as-received samples. Experimental results revealed that a high-density twinned structure layer formed on the surface of the shot peened Ti-6Al-4V titanium alloy. The predominant twinning type was {10 1¯ 2} extension twins. The density of twins decreases with increasing depth from the surface, and this phenomenon has been proven to be related to the strain rate. A shot peening intensity of 0.3mmA and 200% coverage are suitable, yielding superior surface integrity. Furthermore, shot peening can improve the fatigue life of the Ti-6Al-4V titanium alloy. This enhancement stems from the synergistic effects of the high-density twinned structure, compressive residual stress, and surface work-hardening, which collectively inhibit surface fatigue crack initiation and shift the initiation region to the subsurface, also impeding crack propagation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Fretting fatigue crack nucleation in Ti-6Al-4V10.1046/j.1460-2695.2003.00553.x ↗
2. Combined experimental–numerical investigation of fretting fatigue crack initiation10.1016/S0142-1123(01)00029-9 ↗
3. Effect of laser peening and shot peening on fatigue striations during FCGR study of Ti6Al4V10.1016/j.ijfatigue.2016.08.005 ↗
4. Effect of shot-peening on the fretting wear and crack initiation behavior of Ti-6Al-4V dovetail joint specimens10.1016/j.ijfatigue.2017.10.020 ↗
5. Effect of laser shock peening on the tensile behavior and notch sensitivity of Ni-based single-crystal superalloy10.1007/s00170-023-10954-9 ↗
6. On the influence of mechanical surface treatments - deep rolling and laser shock peening-on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures10.1016/S0921-5093(03)00069-8 ↗
7. The role of pyramidal ⟨c+a⟩ dislocations in the grain refinement mechanism in Ti-6Al-4V alloy processed by severe plastic deformation10.1016/j.actamat.2020.08.076 ↗
8. Origin mechanism of heterostructure nanograins with gradient grain size suppressing strain localization10.1016/j.msea.2023.145584 ↗
9. On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550°C10.1016/j.ijfatigue.2012.03.008 ↗
10. Elucidating the effect of gradient structure on strengthening mechanisms and fatigue behavior of pure titanium10.1016/j.ijfatigue.2021.106142 ↗
11. Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts10.1016/j.actamat.2017.01.050 ↗
12. Nanostructure formation mechanism of α-titanium using SMAT10.1016/j.actamat.2004.05.023 ↗
13. Effects of fretting fatigue on the residual stress of shot peened Ti-6Al-4V samples10.1016/j.msea.2005.02.028 ↗
14. Microstructural characterisation of metallic shot peened and laser shock peened Ti-6Al-4V10.1016/j.actamat.2016.10.044 ↗
15. Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour10.1016/0921-5093(95)10084-9 ↗
16. Effect of controlled shot peening and laser shock peening on the fatigue performance of 2024-T351 aluminum alloy10.1361/105994903770342944 ↗
17. The effects of laser peening on high-cycle fatigue in 7085-T7651 aluminum alloy10.1016/j.msea.2007.05.024 ↗
18. The effects of laser peening and shot peening on high cycle fatigue in 7050-T7451 aluminum alloy10.1016/j.msea.2009.08.045 ↗
19. Experimental assessment and simulation of surface nanocrystallization by severe shot peening10.1016/j.actamat.2015.06.054 ↗
20. Near surface modification of aluminum alloy induced by laser shock processing10.1016/j.optlastec.2014.05.028 ↗
21. Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys10.1016/j.msea.2011.12.072 ↗
22. Recent developments and novel applications of laser shock peening: a review10.1002/adem.202001216 ↗
23. Analyse des surfaces grenaillées : fissuration, rugosité et contraintes résiduelles10.1051/mattech/198775120493 ↗
24. A non-microstructural crack formation model for understanding fatigue life degradation in shot peened carbon steel under LCF loading10.1016/j.ijfatigue.2014.01.012 ↗
25. Influence of counterbody material on fretting wear behaviour of surface mechanical attrition treated Ti-6Al-4V10.1016/j.triboint.2012.07.021 ↗
26. Tensile behavior of friction-stir welded AZ31 magnesium alloy10.1016/j.msea.2016.10.036 ↗
27. High cycle fatigue behavior prediction of shot-peened parts10.1016/j.ijfatigue.2004.03.007 ↗
28. Effect of shot peening on metastable austenitic stainless steels10.1016/j.msea.2015.05.079 ↗
29. Hierarchical twinning induced texture weakening in lean magnesium alloys10.3389/fmats.2019.00187 ↗
30. Assessment of surface hardening effects from shot peening on a Ni-based alloy using electron backscatter diffraction techniques10.1016/j.actamat.2011.04.025 ↗
31. Dynamic recrystallization of titanium: effect of pre-activated twinning at cryogenic temperature10.1016/j.actamat.2018.05.057 ↗
32. Microstructural fatigue mechanisms: cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis10.1016/j.ijfatigue.2012.06.007 ↗
33. Estimating the orientation of Stage I crack paths through the direction of maximum variance of the resolved shear stress10.1016/j.ijfatigue.2013.05.007 ↗
34. The effects of laser peening and shot peening on fretting fatigue in Ti-6Al-4V coupons10.1016/j.triboint.2009.04.005 ↗
35. Surface rolling deformed severity-dependent fatigue mechanism of Ti-6Al-4V alloy10.1016/j.ijfatigue.2022.106732 ↗
36. Strength gradient enhances fatigue resistance of steels
37. Observations of fretting fatigue micro-damage of Ti-6Al-4V10.1016/S0043-1648(03)00152-2 ↗