journal article·2024-09Open access

Experimental and numerical analysis of natural fillers loaded and E-glass reinforced epoxy sandwich composites

C. Balaji Ayyanar, Renugadevi Kumar, Sofiene Helaili, Gayathri B, RinusubaV, Esther Nalini H, Trishna Bal, Femiana Gapsari, Khairul Anam, Sanjay Mavinkere Rangappa, Suchart Siengchin

Abstract

Natural fibers play a crucial role in sandwich composites due to their biodegradability, ease of manufacturing, and ability to reduce pollution. The research aims to develop new biodegradable polymer composites using pine tree leaves (PTL) fillers loaded with epoxy through hand layup technique with different wt. % of PTL fillers. The molded composites were characterized to analyze the crystal size and plane orientations, surface morphology, thermal resistance, and presence of elemental compositions in the PTL filler-loaded epoxy composites through X-ray diffraction (XRD), Field emission scanning electron microscope (FESEM), Energy dispersive analysis (EDX), Differential scanning calorimetry (DSC), and Thermogravimetric analysis (TGA). The 40 wt % of PTL epoxy composites showed a maximum tensile strength of 32 ± 0.5 MPa, a compressive strength of 15 ± 0.5 MPa, a flexural strength of 55 ± 0.5 MPa, and a Shore D hardness of 73 ± 0.5 SHN. The mechanical strength of 40 wt% PTL fillers loaded epoxy composite was enhanced by adding a single and double layer of E-glass fiber on the bottom and top of the PTL fillers loaded epoxy composite, achieving a maximum tensile strength of 76 ± 0.5 MPa. The 40 wt% PTL fillers loaded double E-glass fiber on the bottom and top of the PTL fillers loaded epoxy sandwich composite attained the maximum tensile strength of 156 ± 0.5 MPa, compressive strength of 29 ± 0.5 MPa, flexural strength of 220 ± 0.5 MPa, and Shore D hardness of 79 ± 0.5 SHN. The PTL fillers loaded and reinforced double E-glass fiber epoxy sandwich composite would be used in low-strength structural applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Epoxy Resin Curing Processes · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Researches on the development of new composite materials complete/partially biodegradable using natural textile fibers of new vegetable origin and those recovered from textile waste10.1088/1757-899X/294/1/012021 ↗
2. Water absorption rate of kenaf fiber (KF)/hydroxiteapatite (HA) in simulated sea water
3. An overview of biodegradable packaging in food industry10.1016/j.crfs.2021.07.005 ↗
4. Modification of palm fiber with chitosan-AESO blend coating
5. Characterization of bromelain enzyme treated Bamboo petung fiber (BPF) for composite reinforcement10.1016/j.cscee.2024.100683 ↗
6. Effect of alkali treatment on mechanical properties of rice husk flour reinforced epoxy bio-composite
7. Davim JP, editor. Green composites materials, manufacturing and engineering. DE Gruyter; n.d.
8. 2017
9. Green composites, manufacturing: a sustainable approach
10. Biodegradable composites: materials
11. Potentiality of utilizing woven pineapple leaf fibre for polymer composites10.3390/polym14132744 ↗
12. Mechanical properties and water absorption behaviour of pineapple leaf fibre reinforced polymer composites
13. Investigation of the deformation behavior of epoxy-based composite materials
14. Chapter 7: can high-performance fibers be(come) bio-based and also biocompostable?
15. Impact behavior of pine needle fiber/pistachio shell filler based epoxy composite10.1088/1742-6596/1240/1/012096 ↗
16. Pharmacognosy of pinus roxburghii : a review
17. Influence of calcium carbonate fillers on pine fiber reinforced polyester composites10.1002/pc.26692 ↗
18. Network Formation and physical properties of epoxy resins for future practical applications10.1021/jacsau.2c00120 ↗
19. Mechanical performance of Nano-Al2O3-modified composites at cryogenic and room temperatures10.1002/pc.24301 ↗
20. Towards data-efficient mechanical design of bicontinuous composites using generative AI10.1016/j.taml.2024.100492 ↗
21. Multiscale understanding in fracture resistance of bamboo skin10.1016/j.eml.2021.101480 ↗
22. Investigation on the morphology, thermal properties, and in vitro cytotoxicity of the fish scale particulates filled high-density polyethylene composite
23. Electrospinning of biomedical nanofibers/nanomembranes: effects of process parameters10.3390/polym14183719 ↗
24. Identification of mechanical properties and damage of composites at the mesoscale based on an inverse method coupled with homogenizatio10.1177/0021998309346187 ↗
25. Identification of mechanical properties of a braided alfa stem (Stipa tenacissima L.) by an inverse method10.1177/00219983221147685 ↗
26. Microfibrillated cellulose from pine cone: extraction, properties, and characterization
27. Synthesis of novel PVA–starch formulation-supported Cu–Zn nanoparticle carrying carbon nanofibers as a nanofertilizer: controlled release of micronutrients10.1007/s10853-018-2107-9 ↗
28. Laboratory scale technology for a ballistic protection panel and preliminary results10.1088/1757-899X/1262/1/012058 ↗
29. Investigation of mechanical, thermal and electrical parameters of gel combustion-derived cubic zirconia/epoxy resin composites for high-voltage insulation10.1590/0366-69132020663782887 ↗
30. Characterization of organic matter of plants from lakes by thermal analysis in a N2 atmosphere
31. Isolation and characterization of microcrystalline cellulose from oil palm fronds biomass using consecutive chemical treatments10.1016/j.cscee.2024.100616 ↗
32. Flammability and mechanical properties of Timoho fiber-reinforced polyester composite combined with iron powder filler10.1016/j.jmrt.2022.09.025 ↗
33. Flammability and thermal resistance of Ceiba petandra fiber-reinforced composite with snail powder filler10.1002/pc.28100 ↗
34. Effect of reinforcements and processing method on mechanical properties of glass and basalt epoxy composites10.1007/s42452-020-2774-4 ↗
35. Isolation and extraction of microcellulose from pineapple leaves fiber
36. Fabrication and mechanical characterization of glass fibre reinforced epoxy hybrid composites using fly ash/nano clay/zinc oxide as filler10.1088/1757-899X/376/1/012061 ↗
37. Mechanical behavior of hybrid glass/steel fiber reinforced epoxy composites10.3390/polym9040151 ↗
38. Tensile and flexural strength of glass fiber epoxy composites
39. Strength characterization of E-glass fiber reinforced epoxy composites with filler materials
40. Thermo-mechanical properties of pretreated coir fiber and fibrous chips reinforced multilayered composites10.1038/s41598-021-83140-0 ↗
41. Mechanical characterization of hybrid nano-filled glass/epoxy composites10.3390/polym14224852 ↗
42. Turbine blade made of natural fiber composite structural and vibrational behavior10.1007/978-3-031-14615-2_83 ↗