Mechanism of oxygen content on impact toughness of α + β powder metallurgy titanium alloy
Source abstract
Abstract
Understanding the mechanism of oxygen on toughness of titanium alloys is crucial for popularizing powder metallurgy. In this work, the effect of oxygen content (1500, 3000 and 5000 ppm) on the impact toughness of powder metallurgically modified titanium alloys with fine equiaxed microstructures (∼1.5 μm) was systematically investigated. With increasing oxygen content, the c/a value of the α-phase lattice parameter increases to a maximum of 1.593 Å, and the hardness increases from 4.03 GPa to 5.05 GPa, resulting in an increase in strength of ∼150 MPa and a considerable decrease in the ability of the two phases to coordinate. The crack initiation energy is similar for different oxygen contents, whereas the crack propagation energy increases considerably with decreasing oxygen content; the impact energy of stable crack extension increases from 4 J to 13 J and 35 J, and the impact energy of unstable crack extension and crack collapse stages increases from zero to 14 J and 25 J, respectively, indicating that decreasing oxygen content can substantially improve the crack extension resistance. The activation of numerous dislocations within the two phases and the formation of subgranular boundaries at low oxygen contents promote the release of internal stresses in the grains, and simultaneously, the interfacial resistance to dislocation migration and the concentration of interfacial stresses are also reduced, which improves the coordination of the two-phase plastic deformation of the equiaxed microstructures; the crack extension paths in the impact process become more tortuous and finally achieve impact energies as high as 85–100 J.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (94)
Show source-provided references
1. Insights into the formation of titanium hydrides from first principles calculations10.1016/j.actamat.2024.119921 ↗
2. The effects of carbon, oxygen, and nitrogen on the mechanical properties of titanium and titanium alloys
3. Hydrogen atom occupancy variation induced fragile to strong transition of titanium hydride10.1016/j.scriptamat.2024.115993 ↗
4. Grain refinement in titanium prevents low temperature oxygen embrittlement10.1038/s41467-023-36030-0 ↗
5. A cracking oxygen story: a new view of stress corrosion cracking in titanium alloys10.1016/j.actamat.2022.117687 ↗
6. Experiments and DFT calculations on the effects of interstitial hydrogen on Ti corrosion products in high temperature water10.1016/j.corsci.2024.112014 ↗
7. Powder metallurgy of titanium–past, present, and future10.1080/09506608.2017.1366003 ↗
8. Strength enhancement and modulus modulation in auxetic meta-biomaterials produced by selective laser melting10.1016/j.actbio.2022.09.045 ↗
9. The rapid densification behavior of powder metallurgy Ti alloys by induction heating sintering10.1016/j.jmst.2023.10.009 ↗
10. Phase analysis studies on the titanium-oxygen system10.3891/acta.chem.scand.11-1641 ↗
11. Strong and ductile titanium via additive manufacturing under a reactive atmosphere
12. Formation and evolution mechanisms of micropores in powder metallurgy Ti alloys10.1016/j.matdes.2022.111202 ↗
13. Achieving synergy of strength and ductility in powder metallurgy commercially pure titanium by a unique oxygen scavenger10.1016/j.actamat.2023.119485 ↗
14. A novel method to fabricate high strength and ductility Ti-3Al-5Mo-4.5 V alloy based on TiH2 and pre-hydrogenated master alloy powders10.1016/j.matdes.2023.111791 ↗
15. Oxygen scavenging, grain refinement and mechanical properties improvement in powder metallurgy titanium and titanium alloys with CaB610.1016/j.powtec.2018.09.054 ↗
16. Surface reaction and deoxidation mechanism of titanium powder deoxidized by calcium in atmospheric pressure argon10.1016/j.apt.2022.103729 ↗
17. Aiming at low-oxygen titanium powder: a review10.1016/j.powtec.2021.09.029 ↗
18. In situ synchrotron radiation to understand the pathways for the scavenging of oxygen in commercially pure Ti and Ti–6Al–4V by yttrium hydride10.1016/j.scriptamat.2012.09.024 ↗
19. High oxygen-content titanium and titanium alloys made from powder10.1016/j.jallcom.2020.155526 ↗
20. Enhancing strength and ductility of pure titanium by interstitial oxygen atoms10.1016/j.msea.2022.143806 ↗
21. Optimized mechanical properties of titanium-oxygen alloys by powder metallurgy10.1016/j.jmrt.2022.11.029 ↗
22. Ductility improvement of high-strength Ti–O material upon heteromicrostructure formation10.1016/j.msea.2022.143041 ↗
23. Strong and ductile titanium–oxygen–iron alloys by additive manufacturing10.1038/s41586-023-05952-6 ↗
24. Elimination of oxygen sensitivity in α-titanium by substitutional alloying with Al10.1038/s41467-021-26374-w ↗
25. Oxygen interstitials make metastable β titanium alloys strong and ductile10.1016/j.actamat.2023.119165 ↗
26. Intrinsic impact toughness of relatively high strength alloys10.1016/j.actamat.2017.09.064 ↗
27. Perspectives on titanium science and Technology10.1016/j.actamat.2012.10.043 ↗
28. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process10.1016/j.msea.2022.143260 ↗
29. Mechanism of impact toughness enhancement obtained by globularization of αGB phase for selective laser melted Ti–6Al–4V alloy10.1016/j.msea.2023.146036 ↗
30. Synergistically achieving high strength and impact toughness in Ti–6Al–4V-0.5Mo-0.5Zr alloy pipe with bimodal microstructure10.1016/j.msea.2024.146217 ↗
31. Partition of Nb element on microstructure, tensile and impact properties of a near α Ti–4Nb alloy
32. Effect of annealing temperature on mechanical properties of TC21 titanium alloy with multilevel lamellar microstructure10.1016/j.msea.2023.144788 ↗
33. Effect of microstructure on tensile properties, impact toughness and fracture toughness of TC21 alloy10.1016/j.matdes.2019.107898 ↗
34. Study of crack propagation mechanisms during Charpy impact toughness tests on both equiaxed and lamellar microstructures of Ti–6Al–4V titanium alloy10.1016/j.msea.2014.09.048 ↗
35. Effects of oxygen content on Charpy impact properties and crack resistance of α titanium alloys10.1016/j.msea.2021.141394 ↗
36. Effect of powder oxidation on the impact toughness of electron beam melting Ti-6Al-4V
37. Effect of powder reuse times on additive manufacturing of Ti-6Al-4V by selective electron beam melting10.1007/s11837-015-1300-4 ↗
38. Humidity control in laser powder bed fusion using titanium alloy powder for quality assurance of built parts and reusability of metal powder10.1016/j.jmatprotec.2022.117817 ↗
39. The impact of oxidised powder particles on the microstructure and mechanical properties of Ti-6Al-4 V processed by laser powder bed fusion
40. A critical review of mechanical properties of powder metallurgy titanium
41. High performance titanium alloy compacts by advanced powder processing techniques10.4028/www.scientific.net/KEM.520.30 ↗
42. A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti–6Al–4V and their impacts on ductility10.1016/j.actamat.2014.01.015 ↗
43. 2018
44. Substantial role of charge transfer on the diffusion mechanism of interstitial elements in α-titanium: a First-principles study10.1016/j.scriptamat.2021.114065 ↗
45. Circumventing the strength–ductility trade-off of β-type titanium alloys by defect engineering during laser powder bed fusion
46. Origin of dramatic oxygen solute strengthening effect in titanium10.1126/science.1260485 ↗
47. Mechanistic basis of oxygen sensitivity in titanium10.1126/sciadv.abc4060 ↗
48. Slip-twinning interdependent activation across phase boundaries: an in-situ investigation of a Ti-Al-V-Fe (α+β) alloy10.1016/j.actamat.2020.116520 ↗
49. On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects10.1016/j.scriptamat.2012.01.049 ↗
50. Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate10.1016/j.actamat.2018.04.035 ↗
51. Tailoring planar slip to achieve pure metal-like ductility in body-centred-cubic multi-principal element alloys10.1038/s41563-023-01517-0 ↗
52. Hull · 1999
53. Multi-scale analyses of phase transformation mechanisms and hardness in linear friction welded Ti17(α+β)/Ti17(β) dissimilar titanium alloy joint10.1016/j.cja.2023.08.018 ↗
54. Comprehensive investigation on linear friction welding a dissimilar material joint between Ti17(α+β) and Ti17(β): microstructure evolution, failure mechanisms, with simultaneous optimization of tensile and fatigue properties10.1016/j.msea.2024.146818 ↗
55. Strengthening effects of Al element on strength and impact toughness in titanium alloy10.1016/j.jmrt.2023.07.206 ↗
56. Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys10.1016/j.jmst.2020.11.045 ↗
57. Astm · 2008
58. The fracture toughness and its prediction model for Ti–5Al–5Mo–5V–1Cr–1Fe titanium alloy with basket-weave microstructure10.1016/j.jallcom.2015.01.217 ↗
59. Introduction of a new dynamic fracture toughness evaluation system10.1520/JTE11763J ↗
60. On the impact toughness of gradient-structured metals10.1016/j.actamat.2020.04.027 ↗
61. Impact mechanical behaviour of Al–7Si–Mg (A357) cast aluminum alloy. The effect of artificial aging10.1016/j.msea.2011.04.086 ↗
62. 2015
63. An in situ study of microstructural strain localization and damage evolution in an (α+β) Ti-Al-V-Fe-Si-O alloy10.1016/j.actamat.2022.118424 ↗
64. The effect of the beta phase on the micromechanical response of dual-phase titanium alloys10.1016/j.ijfatigue.2017.03.020 ↗
65. The role of β-titanium ligaments in the deformation of dual phase titanium alloys10.1016/j.msea.2019.01.032 ↗
66. The conflicts between strength and toughness10.1038/nmat3115 ↗
67. Achieving superior fatigue strength in a powder-metallurgy titanium alloy via in-situ globularization during hot isostatic pressing10.1016/j.scriptamat.2023.115345 ↗
68. Onset of plastic deformation and strain localization in relation to β phase in metastable β and dual phase Ti alloys10.1016/j.actamat.2022.118348 ↗
69. Plastic zone size for nanoindentation of irradiated Fe–9%Cr ODS10.1016/j.jnucmat.2016.08.033 ↗
70. Overview No. 1: the nucleation of cavities by plastic deformation10.1016/0001-6160(79)90051-8 ↗
71. Void nucleation during ductile rupture of metals: a review10.1016/j.pmatsci.2023.101085 ↗
72. Deforming TC6 titanium alloys at ultrahigh strain rates during multiple laser shock peening10.1016/j.msea.2013.04.070 ↗
73. Simultaneous grain refinement and nanoscale spinodal decomposition of β phase in Ti-Nb-Ta-Zr alloy induced by ultrasonic mechanical impacts10.1016/j.jallcom.2017.12.049 ↗
74. The formation mechanisms of surface nanocrystallites in β-type biomedical TiNbZrFe alloy by surface mechanical attrition treatment10.1016/j.apsusc.2015.04.137 ↗
75. The coordination behaviors of alpha and beta phases with different grain sizes in Ti-6Al-4V subjected to surface severe plastic deformation10.1016/j.msea.2018.12.112 ↗
76. Making a low-cost duplex titanium alloy ultra-strong and ductile via interstitial solutes10.1016/j.actamat.2022.118411 ↗
77. Microstructure evolution and grain refinement of Ti-6Al-4V alloy by laser shock processing10.1016/j.apsusc.2015.11.192 ↗
78. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts10.1016/j.actamat.2010.03.026 ↗
79. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
80. The cleavage strength of polycrystals
81. Investigation of slip transfer across HCP grain boundaries with application to cold dwell facet fatigue10.1016/j.actamat.2017.01.021 ↗
82. Slip transfer across phase boundaries in dual phase titanium alloys and the effect on strain rate sensitivity10.1016/j.ijplas.2018.01.011 ↗
83. Determination of the structure of α-β interfaces in metastable β-Ti alloys10.1016/j.actamat.2018.03.003 ↗
84. Dislocation-mediated migration of the α/β interfaces in titanium10.1016/j.actamat.2023.119364 ↗
85. In situ transmission electron microscopy deformation of the titanium alloy Ti–6Al–4V: interface behaviour10.1016/j.msea.2006.10.183 ↗
86. The empirical electron theory of solids and molecules
87. Simple models to account for the formation and decomposition of athermal ω phase in titanium alloys10.1016/j.scriptamat.2016.01.042 ↗
88. Analysis of the effect of alloy elements on allotropic transformation in titanium alloys with the use of cohesive energy10.1016/j.commatsci.2015.08.060 ↗
89. Interaction of oxygen interstitials with lattice faults in Ti10.1016/j.actamat.2014.05.025 ↗
90. First-principles prediction of oxygen diffusivity near the (10-12) twin boundary in titanium10.1016/j.actamat.2018.05.076 ↗
91. Effects of oxygen on prismatic faults in α-Ti: a combined quantum mechanics/molecular mechanics study10.1016/j.scriptamat.2014.11.008 ↗
92. Effect of argon-induced porosity on mechanical properties of powder metallurgy titanium alloy components using hot isostatic pressing10.1007/s40195-021-01243-z ↗
93. Impact toughness and deformation modes of Ti–6Al–4V alloy with different microstructures10.1016/j.msea.2020.140411 ↗
94. Effect of precipitates on damping capacity and mechanical properties of Ti–6Al–4V alloy10.1016/j.msea.2007.08.053 ↗