journal article·2020-09Open access

Influence of Y2O3 contents on sintering and mechanical properties of B4C-Al2O3 multiphase ceramic composites

Xingxing Lyu, Ziyou Zhao, Hongliang Sun, Xiaosong Jiang, Chunfeng Hu, Tingfeng Song, Zhiping Luo

Abstract

In this study, B4C-Al2O3 multiphase ceramic composites were prepared by spark plasma sintering (SPS) and Y2O3 was used as a sintering aid. Results show that in the range of 1350–1500°C, nearly full dense B4C-Al2O3 multiphase ceramic composites with a high densification rate (4×10−3/s) can be fabricated. Addition of Y2O3 can lead to reduce activation energy of densification and plastic flow mechanism during sintering of the ceramic composites. At the same time, Y2O3 can react with Al2O3 to form liquid Y3Al5O12, which can effectively reduce the densification temperature of the ceramic composites. With the increase of Y2O3 content, the temperature was lowered from 1500 °C to 1350 °C. When the Y2O3 content was 1.0 vol.%, relative density, hardness, fracture toughness, and flexural strength of the ceramic composites were 98.60%, 23.75 GPa, 4.89 MPa•m1/2, and 464.96 MPa, respectively. The toughening mechanism of the ceramic composites followed particle toughening and micro-crack toughening. The internal grains of the composites were tightly bonded, they were mainly fractured in the transgranular form and the cross section was relatively rough with a high bending strength of 450 MPa.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Novel approach for the preparation of B4C-based cermets10.1016/S0263-4368(00)00012-3 ↗
2. Gamma and neutron attenuation behaviours of boron carbide-silicon carbide composites10.1016/j.anucene.2014.03.026 ↗
3. High temperature fracture of boron carbide: experiments and simple theoretical models10.1007/BF02403232 ↗
4. Densification and mechanical properties of pulsed electric current sintered B4C with in situ synthesized Al3BC obtained by the molten-salt method10.1016/j.jeurceramsoc.2017.07.010 ↗
5. TEM characterization of spark plasma sintered ZrB2-SiC-graphene nanocomposite10.1016/j.ceramint.2018.05.170 ↗
6. Influence of Ni/Co binders and Mo2C on the microstructure evolution and mechanical properties of (Ti0.93W0.07)C–based cermets10.1016/j.ceramint.2018.06.227 ↗
7. Hydroxyapatite consolidated by zirconia: applications for dental implant
8. Effect of fuels on nanostructure and luminescence properties of combustion synthesized MgAl2O4:Eu3+ phosphors10.1016/j.molstruc.2019.05.057 ↗
9. Pressureless sintering of boron carbide10.1016/j.ceramint.2005.02.008 ↗
10. Boron carbide-A comprehensive review10.1016/0955-2219(90)90048-K ↗
11. Pressureless sintering of (ZrB2-SiC-B4C) composites with (Y2O3 + Al2O3) additions10.1016/j.ijrmhm.2015.05.013 ↗
12. Sintering behavior of B4C-CrB2 ceramics10.1023/A:1019927119001 ↗
13. The effect of Ti and TiO2 additions on the pressureless sintering of B4C10.1007/s11661-999-0230-6 ↗
14. Microstructural coarsening during sintering of boron carbide10.1111/j.1151-2916.1989.tb06252.x ↗
15. A review on the Comsol Multiphysics studies of heat transfer in advanced ceramics
16. Numerical modeling of heat transfer during spark plasma sintering of titanium carbide10.1016/j.ceramint.2019.11.262 ↗
17. Role of graphite nano-flakes on the characteristics of ZrB2-based composites reinforced with SiC whiskers
18. Role of nano-WC addition on microstructural, mechanical and thermal characteristics of TiC–SiCw composites10.1016/j.ijrmhm.2020.105248 ↗
19. Role of nano-diamond addition on the characteristics of spark plasma sintered tic ceramics10.1016/j.diamond.2020.107828 ↗
20. Numerical simulation of heat transfer during spark plasma sintering of zirconium diboride10.1016/j.ceramint.2019.10.240 ↗
21. Triplet carbide composites of TiC, WC, and SiC10.1016/j.ceramint.2019.12.155 ↗
22. Microstructure and mechanical properties of B4C based ceramics with Fe3Al as sintering aid by spark plasma sintering10.1016/j.jeurceramsoc.2014.02.014 ↗
23. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
24. Electric current activation of sintering: a review of the pulsed electric current sintering process10.1111/j.1551-2916.2010.04210.x ↗
25. Toughening of super-hard ultra-fine grained B4C densified by spark-plasma sintering via SiC addition10.1016/j.jeurceramsoc.2013.01.018 ↗
26. Static and dynamic mechanical properties of boron carbide processed by spark plasma sintering10.1016/j.jeurceramsoc.2009.07.007 ↗
27. Effects of carbon additives on the properties of zrb2 –based composites: a review10.1016/j.ceramint.2018.01.214 ↗
28. Impact of process parameters on luminescence properties and nanostructure of YVO4:Eu phosphor10.1016/j.matchemphys.2019.03.046 ↗
29. Preparation of B4C–SiC–HfB2 nanocomposite by mechanically activated combustion synthesis10.1016/j.ceramint.2020.01.279 ↗
30. B4C/metal boride composites derived from B4C/metal oxide mixtures10.1016/j.jeurceramsoc.2006.04.042 ↗
31. Boron carbide-zirconium boride in situ composites by the reactive pressureless sintering of boron carbide-zirconia mixtures10.1111/j.1151-2916.2001.tb00714.x ↗
32. Modification of thermal mismatch in B4C-diboride ceramics
33. Ultra-fast densification of boron carbide ceramics under high heating rate and high pressure10.1016/j.ceramint.2010.02.013 ↗
34. Microstructural characterization of spark plasma sintered boron carbide ceramics10.1016/j.ceramint.2009.09.004 ↗
35. Densification and mechanical properties of B4C with Al2O3 as a sintering aid10.1111/j.1151-2916.2000.tb01647.x ↗
36. Densification and mechanical properties of spark plasma sintered B4C with si as a sintering aid10.1111/j.1551-2916.2010.03931.x ↗
37. Hardness and wear resistance of B4C ceramics prepared with several additives10.1016/j.matlet.2005.04.047 ↗
38. Influence of TiB2 content on microstructure and hardness of TiB2-B4C composite10.1016/j.powtec.2005.08.003 ↗
39. Densification behaviour and mechanical properties of pressureless-sintered B4C-CrB2 ceramics10.1023/A:1021027430338 ↗
40. Effects of Y2O3 on microstructure and mechanical properties of ZrB2-SiC ceramics10.1016/j.jallcom.2007.10.137 ↗
41. Advances in microstructure and mechanical properties of zirconium diboride based ceramics10.1016/S0921-5093(02)00520-8 ↗
42. Characteristics of dynamically-formed surface oxide layers on molten zinc–aluminum alloys: a multimodality approach10.1016/j.tsf.2018.10.008 ↗
43. Pressureless sintering and related reaction phenomena of Al2O3-doped B4C10.1007/BF00576282 ↗
44. Effect of Al addition on pressureless sintering of B4C10.1016/j.ceramint.2008.03.003 ↗
45. Effect of low-melting-point sintering aid on densification mechanisms of boron carbide during spark plasma sintering10.1016/j.scriptamat.2018.12.036 ↗
46. On creep enhanced by a liquid phase10.1016/0001-6160(83)90072-X ↗
47. Further observations on creep enhanced by a liquid phase in porous potassium chloride10.1016/0001-6160(85)90140-3 ↗
48. Sintering boron carbide ceramics without grain growth by plastic deformation as the dominant densification mechanism10.1038/srep15827 ↗
49. Hot pressing and spark plasma sintering of alumina: discussion about an analytical modelling used for sintering mechanism determination10.1016/j.scriptamat.2014.04.013 ↗
50. Densification mechanism involved during spark plasma sintering of a codoped α-alumina material: part I. Formal sintering analysis10.1557/JMR.2009.0025 ↗
51. Phenomenological analysis of densification mechanism during spark plasma sintering of MgAl2O410.1557/jmr.2009.0243 ↗
52. Selection of eutectic systems in Al2O3-Y2O3 ceramics10.1016/S1468-6996(01)00027-4 ↗
53. Densification of alumina by SPS and HP: a comparative study10.1016/j.jeurceramsoc.2011.10.031 ↗
54. Improvement of densification and mechanical properties of Al2O3-B4C ceramics10.1016/j.ceramint.2016.04.025 ↗
55. Synthesis and characterization of YB4 ceramics10.1111/j.1551-2916.2011.04676.x ↗
56. Synthesis and reaction sintering of YB4 ceramics10.1016/j.ceramint.2019.06.108 ↗
57. Pressureless sintering of Al2O3 containing up to 20 vol% zirconium diboride (ZrB2)10.1016/S0955-2219(00)00026-1 ↗
58. Structure and properties of Y2O3-doped Al2O3-MWCNT nanocomposites prepared by pressureless sintering and hot-pressing10.1007/s11665-014-0975-y ↗
59. Microstructures and mechanical properties of B4C-SiC intergranular/intragranular nanomultiphase ceramic composites fabricated from B4C, Si, and graphite powders10.1016/j.jeurceramsoc.2014.02.032 ↗