Influence of deposit and process parameters on microstructure and mechanical properties of Ti6Al4V obtained by DED-W (PAW)
Source abstract
Abstract
Direct energy deposition with a wire feedstock (DED-W) of Ti6Al4V is a promising solution to produce large structures with a better buy-to-fly ratio than conventional manufacturing techniques. This study investigates the potential of a plasma arc welding (PAW) as a heat source for DED-W. In order to understand the influence of process parameters on material health, microstructure and mechanical properties, three types of specimens: (i) single deposits; (ii) stacked-deposits walls and (iii) three-dimensional block are built. Two sets of parameters have been determined via deposit energy versus wire feed speed's process windows in order to obtain either slender or wide elements. The adoption of an increased deposit energy for the first several layers radically decreases the necking at the connection with the base plate. Prior β grain's width increases with the time spent above the β transus, which is dictated by the height of the build. On the other hand, α plate's thickness might be governed by the delay between layers which changes the cooling rate. Strain localisation under tensile loading appear either on banding or in the vicinity of αgb layer. Mechanical properties anisotropy related to the columnar shape of prior β grains is more noticeable under Charpy notched impact tests than tensile tests.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure
2. Microstructural characterization and comparison of Ti-6Al-4V manufactured with different additive manufacturing processes10.1016/j.matchar.2018.02.003 ↗
3. On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing10.1016/j.actamat.2018.12.038 ↗
4. Antonysamy · 2012
5. Criticality of porosity defects on the fatigue performance of wire + arc additive manufactured titanium alloy10.1016/j.ijfatigue.2019.01.017 ↗
6. Oxidation of Ti-6Al-4V during wire and arc additive manufacture10.1089/3dp.2017.0144 ↗
7. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterization10.1007/s11661-004-0094-8 ↗
8. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part II. Thermal modeling10.1007/s11661-004-0095-7 ↗
9. Integrated control of solidification microstructure and melt pool dimensions in electron beam wire feed additive manufacturing of Ti-6Al-4V
10. Review of wire arc additive manufacturing for 3D metal printing10.20965/ijat.2019.p0346 ↗
11. Investigation of the overlapping parameters of MPAW-based rapid prototyping10.1108/13552540610670744 ↗
12. Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V10.1016/j.jmatprotec.2012.02.002 ↗
13. Experimental investigation of plasma arc welded Ti–6Al–4V sheets10.1139/tcsme-2019-0149 ↗
14. Experimental investigation and numerical simulation of weld bead geometry and temperature distribution during plasma arc welding of thin Ti-6Al-4V sheets10.1177/0309324716669612 ↗
15. Deposition of Ti–6Al–4V using a high power diode laser and wire, Part I: investigation on the process characteristics10.1016/j.surfcoat.2008.02.008 ↗
16. Fabrication of geometrical features using wire and arc additive manufacture10.1177/0954405412437126 ↗
17. The effect of thermal history on microstructural evolution, cold-work refinement and {\alpha}/\b{eta} growth in Ti-6Al-4V wire + arc AM
18. Alpha texture variations in additive manufactured Ti-6Al-4V investigated with neutron diffraction
19. Variant selection during α precipitation in Ti–6Al–4V under the influence of local stress – a simulation study10.1016/j.actamat.2013.06.042 ↗
20. Analyse multi-échelles des relations microstructure/propriétés mécaniques sous sollicitation monotone et cyclique des alliages de titane β-métastable
21. Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V10.1007/s11661-012-1444-6 ↗
22. The effectiveness of combining rolling deformation with wire–arc additive manufacture on β-grain refinement and texture modification in Ti–6Al–4V10.1016/j.matchar.2016.02.001 ↗
23. Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
24. Variant selection by dislocations during α precipitation in α/β titanium alloys10.1016/j.actamat.2014.12.044 ↗
25. A model for Ti–6Al–4V microstructure evolution for arbitrary temperature changes10.1088/0965-0393/20/5/055006 ↗
26. Microstructural characterization of binary microstructure pattern in selective laser-melted Ti-6Al-4V10.1007/s00170-019-04002-8 ↗
27. Study of crack propagation mechanisms during Charpy impact toughness tests on both equiaxed and lamellar microstructures of Ti–6Al–4V titanium alloy10.1016/j.msea.2014.09.048 ↗
28. Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition10.1016/j.jmatprotec.2011.01.018 ↗
29. Wire-feed additive manufacturing of metal components: technologies, developments and future interests10.1007/s00170-015-7077-3 ↗
30. Ayed · 2020 · 26
31. Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process10.1080/13621718.2018.1564986 ↗
32. Additive manufacturing using plasma transferred arc
33. Deposition of Ti–6Al–4V using laser and wire, part I: microstructural properties of single beads10.1016/j.surfcoat.2011.07.095 ↗
34. Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)10.1016/j.msea.2011.10.095 ↗
35. Additive manufacturing of Ti6Al4V with wire laser metal deposition process10.4028/www.scientific.net/MSF.1016.24 ↗
36. Dickens · 1992
37. Study of the impact of the synergic line and the strategy of conception on Ti-6Al-4V wire arc additive manufacturing process (WAAM-CMT)10.4028/www.scientific.net/MSF.1016.250 ↗
38. Microstructure and texture evolution during solidification processing of Ti–6Al–4V10.1016/S0924-0136(02)00865-8 ↗
39. Effects of deposition strategies on macro/microstructure and mechanical properties of wire and arc additive manufactured Ti6Al4V10.1016/j.msea.2019.03.001 ↗
40. Almeida · 2010 · 25
41. Hugin - panorama photo stitcher, (n.d.). http://hugin.sourceforge.net/.
42. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
43. E28 Committee, Test methods for notched bar impact testing of metallic materials, ASTM International, n.d. https://doi.org/10.1520/E0023-18.10.1520/E0023-18 ↗
44. Material morphological characteristics in laser ablation of alpha case from titanium alloy10.1016/j.apsusc.2012.04.173 ↗
45. Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling10.1080/13621718.2019.1580439 ↗
46. Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments10.1016/j.jallcom.2018.04.158 ↗
47. Anisotropy in the impact toughness of selective laser melted Ti–6Al–4V alloy10.1016/j.msea.2015.10.045 ↗