Simultaneous addition of slag binder, recycled concrete aggregate and sustainable powders to self-compacting concrete: a synergistic mechanical-property approach
Source abstract
Abstract
The behavior of Self-Compacting Concrete (SCC) is very sensitive to the use of by-products in replacement of conventional cement or finer aggregate fractions. The high proportions of these raw materials in SCC can in great part explain this performance. 18 SCC mixes of slump-flow class SF3 were prepared for a thorough evaluation of different sustainable materials and for the prediction of their effects as binder or fine/powder aggregate on the mechanical properties of SCC. The mixes incorporated 100% coarse Recycled Concrete Aggregate (RCA); different amounts (0%, 50% or 100%) of fine RCA; CEM I ordinary Portland cement and CEM III/A (with 45% ground granulated blast furnace slag); and more sustainable powders compared to conventional limestone filler <0.063 mm (such as limestone powder 0/0.5 mm and RCA powder 0/0.5 mm). Flowability, hardened density, strength under compression, tensile and bending stresses and modulus of elasticity were all studied. The addition of 50% fine RCA yielded an SCC of adequate strength, stiffness and flowability. SCC manufactured with limestone powder 0/0.5 mm showed the best overall performance, while SCC behavior was improved when adding CEM III/A by adjusting the mix composition. The experimental results of all the mechanical properties were compared with the values predicted by the compressive-strength-based formulas from the European and USA standards. Overall, the values resulting from those expressions overestimated all the mechanical properties. Therefore, since all these properties followed the same simple-regression trend, a statistical analysis was performed to develop a global model capable of accurately predicting them all.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. 2017
2. 2015
3. Ramzy · 2013
4. Construction waste management profiles, practices, and performance: a cross-jurisdictional analysis in four countries10.3390/su8020190 ↗
5. Life cycle assessment of natural and mixed recycled aggregate production in Brazil10.1016/j.jclepro.2017.03.068 ↗
6. Advantages and shortcomings of the utilization of recycled wastes as aggregates in structural concretes10.1016/j.conbuildmat.2021.123729 ↗
7. Use of recycled construction and demolition waste (CDW) aggregates: a sustainable alternative for the pavement construction industry10.1016/j.jclepro.2016.06.088 ↗
8. Structural behaviour and strength prediction of recycled aggregate concrete beams10.1007/s13369-019-04195-w ↗
9. Use of recycled aggregates arising from construction and demolition waste in new construction applications10.1016/j.jclepro.2019.117629 ↗
10. Properties of plain concrete produced employing recycled aggregates and sea water10.1007/s40999-017-0229-0 ↗
11. Performance of hot-mix asphalt involving recycled concrete aggregates10.1080/10298436.2018.1518525 ↗
12. The use of steel slag aggregate to enhance the mechanical properties of recycled aggregate concrete and retain the environment10.1016/j.conbuildmat.2013.12.063 ↗
13. Characterization of concrete containing RCA and GGBFS: mechanical, microstructural and environmental properties10.1016/j.conbuildmat.2021.123134 ↗
14. Self-compacting concrete manufactured with recycled concrete aggregate: an overview10.1016/j.jclepro.2020.121362 ↗
15. Construction and demolition waste applications and maximum daily output in Spanish recycling plants10.1177/0734242X20904437 ↗
16. Effects of the old cement mortar attached to the recycled aggregate surface on the bond characteristics between aggregate and cement mortar10.1016/j.conbuildmat.2014.02.047 ↗
17. Temporal flowability evolution of slag-based self-compacting concrete with recycled concrete aggregate10.1016/j.jclepro.2021.126890 ↗
18. Concrete with fine recycled aggregates: a review10.1080/19648189.2013.851038 ↗
19. Physical, chemical and mineralogical properties of fine recycled aggregates made from concrete waste10.1016/j.conbuildmat.2015.03.112 ↗
20. The influence of recycled aggregates from precast elements on the mechanical properties of structural self-compacting concrete10.1016/j.conbuildmat.2018.06.132 ↗
21. Methods for improving the microstructure of recycled concrete aggregate: a review10.1016/j.conbuildmat.2020.118164 ↗
22. Fiber-reinforced polymer bars embedded in a resin concrete: study of both materials and their bond behavior10.1002/pc.20188 ↗
23. Structural concrete with simultaneous incorporation of fine and coarse recycled concrete aggregates: mechanical, durability and long-term properties10.1016/j.conbuildmat.2017.07.215 ↗
24. Cyclic behavior of RC beam-column joints with epoxy resin and ground tire rubber as partial cement replacement10.1016/j.conbuildmat.2019.03.216 ↗
25. Modifying the pore size distribution in Fe-rich inorganic polymer mortars: an effective shrinkage mitigation strategy10.1016/j.cemconres.2020.106330 ↗
26. The study of properties and behavior of self compacting concrete containing Electric Arc Furnace Slag (EAFS) as aggregate10.1016/j.asej.2019.10.001 ↗
27. Nearly zero CO2 cementitious composites
28. Characterization of ground granulated blast-furnace slags and fly ashes and their hydration in portland cement blends10.1520/CCA10387J ↗
29. Toward greener and sustainable Li-ion cells: an overview of aqueous-based binder systems10.1021/acssuschemeng.9b07478 ↗
30. Use of iron and steel slags in concrete: state of the art and future perspectives10.3390/su13020556 ↗
31. Suitability of alkali activated slag/fly ash (AA-GGBS/FA) concretes for chloride environments: characterisation based on mix design and compliance testing10.1016/j.conbuildmat.2019.05.043 ↗
32. The effect of fineness on the hydration activity index of ground granulated blast furnace slag10.3390/ma12182984 ↗
33. Concrete properties comparison when substituting a 25% cement with slag from different provenances10.3390/ma11061029 ↗
34. Development of sustainable performance index (SPI) for self-compacting concretes10.1016/j.jobe.2019.100974 ↗
35. Mechanical properties of recycled concrete made with different types of coarse aggregate10.1016/j.conbuildmat.2016.12.163 ↗
36. The influence of the use of recycled aggregates on the compressive strength of concrete: a review10.1080/19648189.2014.974831 ↗
37. Recycled concrete aggregates: a review10.1007/s40069-013-0032-5 ↗
38. Properties of recycled concrete aggregate and their influence in new concrete production10.1016/j.resconrec.2018.02.005 ↗
39. Models for compressive strength estimation through non-destructive testing of highly self-compacting concrete containing recycled concrete aggregate and slag-based binder10.1016/j.conbuildmat.2021.122454 ↗
40. Feasibility test and evaluation models to develop sustainable insulation concrete using foam and bottom ash aggregates10.1016/j.conbuildmat.2019.07.130 ↗
41. Numerical method to model the creep of recycled aggregate concrete by considering the old attached mortar10.1016/j.cemconres.2019.01.008 ↗
42. Establishing a relationship between modulus of elasticity and compressive strength of recycled aggregate concrete10.1016/j.jclepro.2015.10.064 ↗
43. Methodology for the mix design of self-compacting concrete using different mineral additions in binary blends of powders10.1016/j.conbuildmat.2014.04.021 ↗
44. Influence of water-reducing admixtures on the mechanical performance of recycled concrete10.1016/j.jclepro.2013.06.022 ↗
45. Self-compacting concrete10.3151/jact.1.5 ↗
46. Investigating the effects of steel slag powder on the properties of self-compacting concrete with recycled aggregates10.1016/j.conbuildmat.2018.12.150 ↗
47. Determination of the optimum amount of superplasticizer additive for self-compacting concrete10.3390/app10093096 ↗
48. Self-compacting concrete with recycled aggregates – a literature review10.1016/j.jobe.2019.01.001 ↗
49. Comparative life cycle assessment of ornamental stone processing waste recycling, sand, clay and limestone filler10.1177/0734242X18819976 ↗
50. Study of the rheology of self-compacting concrete with fine recycled concrete aggregates10.1016/j.conbuildmat.2015.08.091 ↗
51. EN-Euronorm. Rue de stassart, 36. Belgium-1050 Brussels, European Committee for Standardization.
52. 2019
53. 2010
54. 2010
55. Self-compacting concrete incorporating electric arc-furnace steelmaking slag as aggregate10.1016/j.matdes.2016.11.048 ↗
56. Ryu · 2011 · 371
57. The design of self-compacting structural mortar containing steelmaking slags as aggregate10.1016/j.cemconcomp.2020.103627 ↗
58. Effect of fine recycled concrete aggregate on the mechanical behavior of self-compacting concrete10.1016/j.conbuildmat.2020.120671 ↗
59. 2010
60. 2001
61. Assessment of longitudinal and transversal plastic behavior of recycled aggregate self-compacting concrete: a two-way study10.1016/j.conbuildmat.2021.123426 ↗
62. Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and ground granulated blast-furnace slag
63. Adhesion problems in the recycling of concrete (proceedings of a NATO advanced research institute)
64. Effect of fine and coarse recycled concrete aggregate on the mechanical behavior of precast reinforced beams: comparison of FE simulations, theoretical, and experimental results on real scale beams10.1016/j.conbuildmat.2018.10.075 ↗
65. Statistical approach for the design of structural self-compacting concrete with fine recycled concrete aggregate10.3390/math8122190 ↗
66. Compressive strength in compressed earth blocks. Comparison between different test methods
67. Biaxial bending and axial load in reinforced concrete sections