journal article·2022-07Open access

Combination gear hot forging process and microstructure optimization

Xiaomin Huang, Yong Zang, Hongchao Ji, Baoyu Wang, Hailong Duan

Abstract

Conjunction gears, which are also known as helical gears with clutch gears, are used mainly in the transmission and shift design of automobile gearboxes. In this paper, focusing on the hot forging process and microstructure changes after forging, hot forging is proposed for manufacturing a conjunction gear according to the characteristics of a combination gear. Combined with finite element numerical simulation, by comparing changes in temperature, equivalent stress, equivalent strain, recrystallization fraction, and average grain size, the effect of the optimization of the forging process of a combined tooth billet is achieved using the response surface methodology. Finally, optimal forging process parameters are obtained through experimental research, and the quenched structure after hot forging is observed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. A review of force reduction methods in precision forging axisymmetric shapes10.1007/s00170-018-2151-2 ↗
2. An investigation into the forging of Bi-metal gears10.1016/j.jmatprotec.2014.04.020 ↗
3. Numerical analysis and experimental validation of conjunction gear via hot forging-upsetting finishing-radial extrusion10.1016/j.acme.2018.11.006 ↗
4. An investigation on deformation mechanism of non-standard gear teeth forming in the hot impression forging of multicore cable cutter10.1016/j.jmapro.2019.11.019 ↗
5. Researching of commonalities and differences in cold forging of spur and helical gears10.1007/s11740-019-00887-2 ↗
6. Development of cam ring gear parts of large diameter for truck clutch using hot–cold complex forging technology of small bar10.1007/s12541-019-00100-5 ↗
7. Forming of light-weight gear wheel by plate forging10.1016/j.cirp.2016.04.134 ↗
8. Sol–gel auto-combustion synthesize and characterization of a novel anticorrosive cobalt ferrite nanoparticles dispersed in silica matrix10.1007/s10854-017-6823-8 ↗
9. Inhibitive effect of L – OH on the corrosion of austenitic chromium - nickel steel in H2SO4 solution10.1142/S0218625X08011561 ↗
10. Preform optimization for bevel gear of warm forging process10.1016/j.procir.2018.03.083 ↗
11. Hot forging process design of sprocket wheel and environmental effect analysis10.1007/s12206-018-0432-1 ↗
12. Inclusion of hot stamping operations in progressive-die plate forging of tailored high strength gear part10.1007/s00170-016-9705-y ↗
13. Study on precision forming and lift-out process of small cone angle spiral bevel gear by finite element analysis10.1007/s00170-017-0291-4 ↗
14. Evaluation of different levels of prestressing for cold forging tools by numerical simulation analysis10.1007/s00170-018-2351-9 ↗
15. The quality of hot forged spur gear forms. Part I: Mechanical and metallurgical properties10.1016/0020-7357(81)90003-2 ↗
16. Controlling flow instability in straight spur gear forging using numerical simulation and response surface method10.1007/s40195-017-0669-1 ↗
17. Research on precision die forging utilizing divided flow (first report, theoretical analysis of processes utilizing flow relief-axis and relief hole
18. Precision forging of spur gears with inside relief10.1016/S0890-6955(99)00015-2 ↗
19. Research on cold forging methods of accurate spur gears
20. Analysis of metal flow and technology improvement on gear forging10.3901/JME.2008.05.186 ↗
21. Finite element modeling of shrink-fit design for improvement of die-service life in hot forging process of a bevel gear10.1016/j.matpr.2019.06.202 ↗
22. Hot workability, constitutive model and processing map of 3Cr23Ni8Mn3N heat resistant steel10.1016/j.vacuum.2019.04.041 ↗
23. Hot compressive deformation behavior and microstructure evolution of a Ti-55511 alloy with basket-weave microstructures10.1016/j.vacuum.2019.108878 ↗
24. Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression10.1016/j.jallcom.2019.04.319 ↗
25. Microstructure evolution and constitutive equations for the high-temperature deformation of 5Cr21Mn9Ni4N heat-resistant steel10.1016/j.jallcom.2016.09.230 ↗
26. Microstructure and texture evolution in cold rotary forging of spur bevel gears of 20CrMnTi alloy steel10.1007/s11665-016-1929-3 ↗
27. Homogeneity of microstructure and Vickers hardness in cold closed-die forged spur-bevel gear of 20CrMnTi alloy10.1007/s11771-015-2676-6 ↗
28. Study on the microstructure and texture evolution of hot forged 20CrMnTiH steel spur bevel gear by simulation and experiment10.1007/s11665-020-04839-1 ↗
29. A novel unified model predicting flow stress and grain size evolutions during hot working of non-uniform as-cast 42CrMo billets10.1016/j.cja.2018.04.009 ↗
30. Identification for the optimal working parameters of Al–Zn–Mg–Cu alloy with the processing maps based on DMM10.1007/s00170-011-3241-6 ↗
31. Effects of strain rate and deformation temperature on microstructures and hardness in plastically deformed pure10.1016/S1005-0302(11)60017-0 ↗
32. Microstructure evolution and dynamic recrystallization model of 20CrMnTiH steel during hot compression
33. Finite element analysis and simulation for cold precision forging of a helical gear10.1007/s11771-012-1416-4 ↗
34. Effect of forging temperature on homogeneity of microstructure and hardness of precision forged steel spur gear10.1016/j.matchemphys.2008.07.044 ↗
35. Design and mechanical property analysis of ultrafine grained gears from AA5083 previously processed by equal channel angular pressing and isothermal forging10.1016/j.matdes.2014.05.048 ↗
36. Wang · 2012
37. A new forming method of straight bevel gear using a specific die with a flash10.1007/s00170-018-2862-4 ↗
38. Influence of tribological conditions on application relevant component properties of cold forged gears10.1007/s11740-019-00909-z ↗
39. Research on the die release motion for spiral bevel gear forging10.1016/j.ijmecsci.2017.12.033 ↗
40. Optimization the working parameters of as-forged 42CrMo steel by constitutive equation-dynamic recrystallization equation and processing maps10.1016/j.jmrt.2020.04.078 ↗
41. Constitutive equation and model validation for 33Cr23Ni8Mn3N heat-resistant steel during hot compression10.1016/j.rinp.2019.102633 ↗
42. Effect of tempering on bonding characteristics of cross wedge rolling 42CrMo/Q235 laminated shafts10.1007/s42243-020-00488-9 ↗
43. Influence of process parameters on interfacial tensile strength of cross-wedge rolling of 42CrMo/Q235 laminated shafts10.1007/s42243-018-0152-x ↗
44. Analysis and prediction of the performance of free- piston Stirling engine using response surface methodology and artificial neural network10.1016/j.applthermaleng.2021.116557 ↗
45. Modeling and optimization of resistance spot welded aluminum to Al-Si coated boron steel using response surface methodology and genetic algorithm10.1016/j.measurement.2020.108766 ↗