Hardness and tribological properties of electrodeposited Ni–P multilayer coatings fabricated through a stirring time-controlled technique
Source abstract
Abstract
Ni–P multilayer coatings were deposited on the surfaces of low-carbon steel by direct current electrodeposition through a stirring-time controlled technique (STT). The microstructure, hardness, friction coefficient and wear properties of the deposits were investigated. Scanning electron microscopy (SEM) in back-scattered electron mode revealed multilayer structures of Ni–P coatings fabricated by repeatedly turning the magnetic stirrer in the bath on and off. Energy dispersive X-ray spectroscopy (EDS) was employed to quantitatively compare the P content in the alternating layers. The hardness of the Ni–P multilayer coatings was found to be significantly greater than that of monolithic Ni–P coatings. A maximum hardness value of 580 ± 8.7 HV0.1 was found in the sample prepared using the on- and off-stirring periods of 8 and 15 min, respectively. This showed an increased hardness of 20.1% from that of sample prepared with the stirrer turned off. The Ni–P multilayer coatings prepared by STT also had superior wear resistance to that of monolithic Ni–P coatings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and interfaces · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Wear resistance of graphenic-nickel composite coating on austenitic stainless steel10.1016/j.matlet.2020.128769 ↗
2. Structure, mechanical properties and corrosion resistance of amorphous Ti-Cr-O coatings10.1016/j.surfcoat.2019.06.061 ↗
3. Multipass and reciprocating microwear study of TiN based films10.1016/j.surfcoat.2019.07.085 ↗
4. Compositional and tribo-mechanical characterization of Ti-Ta coatings prepared by confocal dual magnetron Co-sputtering10.1002/adem.201700687 ↗
5. Mechanical properties and microstructural stability of CuTa/Cu composite coatings10.1016/j.surfcoat.2019.02.072 ↗
6. Electrodeposition of nanocrystalline Ni/Ni-Al2O3 nanocomposite modulated multilayer coatings10.1016/j.matdes.2016.06.018 ↗
7. Development of nanolaminated multilayer Ni-P alloy coatings for better corrosion protection10.1039/C6RA01547F ↗
8. Electrodeposition of nickel
9. An Overview of Nanostructured Materials
10. New insight into the mechanism of cathodic electrodeposition of zinc oxide thin films onto vitreous carbon10.1016/j.electacta.2013.01.103 ↗
11. Low temperature electrochemical deposition of highly active elements10.1016/j.cossms.2014.11.006 ↗
12. Hardness and tribological properties of co-electrodeposited Ni-W-B/B coatings10.1016/j.surfcoat.2020.126313 ↗
13. The relationship between hardness and abrasive wear resistance of electrodeposited nanocrystalline Ni-P coatings10.1016/S1359-6462(02)00633-4 ↗
14. An in-situ tem study of the thermal stability of nanocrystalline NiP10.1016/0956-716X(91)90144-P ↗
15. The effects of structural relaxation and crystallization on the corrosion behavior of electrodeposited amorphous Ni-P alloys10.1016/0010-938X(91)90134-B ↗
16. Electrodeposited nickel-phosphorous (Ni-P) alloy coating: an in-depth study of its preparation, properties, and structural transitions10.1007/s11998-012-9411-0 ↗
17. Improvement of the erosion-corrosion resistance of magnesium by electroless Ni-P/Ni(OH)2-ceramic nanoparticle composite coatings10.1016/j.surfcoat.2016.04.063 ↗
18. Microstructure and mechanical properties of Ni-P-Si3N4 nanowire electroless composite coatings10.1016/j.apsusc.2015.09.011 ↗
19. Mechanical characterization of electrodeposition of Ni-P alloy coating10.21272/jnep.12(1).01001 ↗
20. Ni-P-TiO2 nanocomposite coatings with uniformly dispersed Ni3Ti intermetallics: effects of current density and post heat treatment10.1016/j.surfcoat.2019.05.058 ↗
21. Smart coatings - multilayered and multifunctional in-situ ultrahigh-temperature coatings10.1016/B978-008044964-7/50014-5 ↗
22. A cyclic voltammetry study of the NiP electrodeposition10.1016/0013-4686(93)85137-N ↗
23. NiP electrodeposition on a rotating-disc electrode and in a jet cell: relationship between plating parameters and structural characteristics10.1016/0257-8972(93)90175-N ↗
24. Grain growth and mechanical properties of electrodeposited nanocrystalline nickel-4.4mass% phosphorus alloy10.1016/S0921-5093(03)00285-5 ↗
25. Studies of the hydrogen evolution reaction on Raney nickel-molybdenum electrodes10.1023/B:JACH.0000031161.26544.6a ↗
26. New electrode materials containing titanium powder in an amorphous matrix of Ni-P10.4028/www.scientific.net/KEM.230-232.213 ↗
27. Electroless nickel, alloy, composite and nano coatings - a critical review10.1016/j.jallcom.2013.03.107 ↗
28. Properties of electroless Nickel at elevated temperature - a review10.1016/j.proeng.2014.12.321 ↗
29. Electrochemical nickel – phosphorus alloy formation10.1179/095066003225008482 ↗
30. Improved wear resistance of alternating amorphous and crystalline layers in electrodeposited Ni-P multilayers10.1016/j.surfcoat.2020.125470 ↗
31. Preparation of amorphous-nanocrystalline composite structured Ni-P electrodeposits10.1016/j.surfcoat.2007.05.040 ↗
32. Microstructure evolution and hardening mechanisms of Ni-P electrodeposits10.1016/j.surfcoat.2010.08.115 ↗
33. Electrochemical fabrication of nanostructured, compositionally modulated metal multilayers (CMMMs)10.1007/978-0-387-73582-5_9 ↗
34. Attempt to design a strong solid10.1103/PhysRevB.2.547 ↗
35. Improvement of the fretting damage resistance of Ti-811 alloy by Cu/Ni multilayer films10.1016/j.triboint.2010.11.005 ↗
36. Mechanical properties and load bearing capability of nanocrystalline nickel-tungsten multilayered coatings10.1016/j.surfcoat.2020.125472 ↗
37. Mechanical properties of electrodeposited Ni-W thin films with alternate W-rich and W-poor multilayers10.1016/j.electacta.2014.11.190 ↗
38. Wear response of composition-modulated multilayer Ni-W coatings10.4028/www.scientific.net/AMR.1025-1026.302 ↗
39. Sliding wear behavior of Ni–Co–P multilayer coatings electrodeposited by pulse reverse method10.1016/j.triboint.2019.105914 ↗
40. The effect of stirring rate on electrodeposition of nanocrystalline nickel coatings and their corrosion behaviors and mechanical characteristics10.20964/2017.06.68 ↗
41. Ni-P/Zn-Ni compositionally modulated multilayer coatings – Part 1: electrodeposition and growth mechanism, composition, morphology, roughness and structure10.1016/j.apsusc.2018.02.127 ↗
42. Ni-P/Zn-Ni compositionally modulated multilayer coatings – Part 2: corrosion and protection mechanisms10.1016/j.apsusc.2018.02.130 ↗
43. Effect of annealing on the structure and hardness of Ni-P-W multilayered alloy coatings produced by pulse plating10.1016/S0921-5093(99)00583-3 ↗
44. An electrodeposition technique for producing multilayers of nickel-phosphorus and other alloys10.1149/1.2056116 ↗
45. Electrochemical deposition: a method for the production of artificially structured materials10.1016/0921-5093(93)90716-R ↗
46. Morphology, hardness, and wear properties of Ni-base composite coating containing Al particle10.3390/coatings10040346 ↗
47. Electrodeposition of NiP amorphous alloys. A multilayer structure10.1016/0040-6090(94)90210-0 ↗
48. Electrodeposition of Ni-P amorphous alloys10.1149/1.2069100 ↗
49. Electrochemical study on Ni-P electrodeposition10.1016/j.electacta.2005.02.129 ↗
50. The mechanism of phosphorus incorporation during the electrodeposition of Nickel-Phosphorus alloys10.1149/1.2056114 ↗
51. Effect of H3PO3 concentration on the electrodeposition of nanocrystalline Ni-P deposited in an emulsified supercritical CO2 bath10.1016/j.electacta.2011.10.018 ↗
52. What is behind the inverse Hall-Petch effect in nanocrystalline materials?10.1016/j.actamat.2007.02.021 ↗
53. The corrosion behavior of Ni-P deposits with high phosphorous contents in brine media10.1016/S0254-0584(03)00193-7 ↗
54. Wood · 2015
55. Effect of Ni sublayer thickness on sliding wear characteristics of electrodeposited Ni/Cu multilayer coatings10.1016/j.surfcoat.2007.02.014 ↗
56. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
57. Strength and plasticity of nanolaminated materials10.1080/21663831.2016.1225321 ↗
58. Preparation, microstructure and sliding-wear characteristics of brush plated copper-nickel multilayer films10.1016/j.surfcoat.2010.12.032 ↗
59. Brush plated multilayered Cu/Ni coating from a single electrolyte and its fretting wear behaviors10.4028/www.scientific.net/AMR.97-101.1467 ↗
60. Influence of microstructure on the wear mechanism of multilayered Ni coating deposited by ultrasound-assisted electrodeposition10.1016/j.surfcoat.2012.08.015 ↗