Effect of heat treatments on metastable pitting of 316L stainless steel fabricated by selective laser melting
Source abstract
Abstract
Effect of heat treatments on metastable pitting of 316L stainless steel fabricated by selective laser melting (SLM) was studied by scanning electron microscopy, potentiodynamic polarization, electrochemical noise (EN) and transient analysis techniques. The results show that the selective laser melted (SLMed) 316L stainless steel was composed of honeycomb cells with different orientations, and a small number of lack-of-fusion (LOF) pores were randomly distributed. After heat treatment, the honeycomb-like cellular structure transformed into austenite structure, and the non-metallic inclusions coarsened and grew. Non-metallic inclusions can be divided into two types according to the composition difference, one was manganese silicate enriched by Mn, Si and O and the other was MnS coexisted with the manganese silicate. The potentiodynamic polarization results show that the pitting potential of SLMed 316L stainless steel decreased after heat treatment. During the EN tests, three kinds of current transient were found, which corresponded to the metastable pitting initiated by the manganese silicate oxide inclusions, MnS coexisted with the manganese silicate and pore defects, respectively. Statistical analysis results of the transient signals show that the heat treatment reduced the nucleation rate of metastable pitting, and increased the transient amplitude, pit radius and pit stability product. The decreased pitting performance after heat treatment can be attributed to the low pit growth resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Statistical analysis of the pitting corrosion induced by potentiostatic pulse tests of wrought and SLM 316L stainless steels10.1016/j.corsci.2021.110036 ↗
2. Influence of 17-4 PH stainless steel powder recycling on properties of SLM additive manufactured parts10.1016/j.jmrt.2021.12.089 ↗
3. Selective laser melting (SLM) of CX stainless steel: theoretical calculation, process optimization and strengthening mechanism10.1016/j.jmst.2020.09.031 ↗
4. Laser powder bed fusion of AISI 316L lattice structures for biomedical applications10.1016/j.matpr.2022.09.267 ↗
5. Evolution of residual stress behavior in selective laser melting (SLM) of 316L stainless steel through preheating and in-situ re-scanning techniques10.1016/j.optlastec.2021.107806 ↗
6. An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by Directed Energy Deposition10.1016/j.msea.2020.139179 ↗
7. On the effect of rapid annealing on the microstructure and mechanical behavior of additively manufactured stainless steel by Laser Powder Bed Fusion10.1016/j.msea.2021.142109 ↗
8. On the pitting behaviour of laser powder bed fusion prepared 316L stainless steel upon post-processing heat treatments10.1016/j.corsci.2021.110060 ↗
9. Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing10.1016/j.corsci.2019.108412 ↗
10. Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting10.1016/j.corsci.2019.108314 ↗
11. Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing10.1016/j.corsci.2019.108353 ↗
12. Correlated pitting stages of 304 stainless steel with recurrence quantification analysis of electrochemical noise10.1002/maco.201810318 ↗
13. Metastable pitting corrosion of 304 stainless steel in 3.5% NaCl solution10.1016/j.corsci.2014.04.033 ↗
14. Electrochemical noise comparative study of pitting corrosion of 316L stainless steel fabricated by selective laser melting and wrought10.1016/j.jelechem.2021.115351 ↗
15. Validation of corrosion rates measured by the Tafel extrapolation method10.1016/j.corsci.2005.05.046 ↗
16. Pitting behavior of 316L stainless steel in direct culture with mesenchymal stem cells10.1016/j.corsci.2022.110380 ↗
17. Effect of solution annealing on microstructures and corrosion behavior of wire and arc additive manufactured AZ91 magnesium alloy in sodium chloride solution10.1016/j.jmrt.2022.02.092 ↗
18. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes10.1016/j.jmst.2019.03.003 ↗
19. The role of microstructure and surface finish on the corrosion of selective laser melted 304L10.1149/2.0431805jes ↗
20. Corrosion performance of additively manufactured stainless steel parts: a review
21. The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel10.1016/j.msea.2021.141611 ↗
22. Evolution of current transients and morphology of metastable and stable pitting on stainless steel near the critical pitting temperature10.1016/j.corsci.2005.03.002 ↗
23. Effect of Mo species on metastable pitting of Fe18Cr alloys—a current transient analysis10.1016/j.corsci.2005.05.049 ↗
24. Pitting resistance of 316 stainless steel after laser shock peening: determinants of microstructural and mechanical modifications10.1016/j.jmatprotec.2021.117091 ↗
25. The history of the Point Defect Model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
26. Effects of cyclic stress on the metastable pitting characteristic for 304 stainless steel under potentiostatic polarization10.1016/j.corsci.2015.01.009 ↗
27. Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review10.1016/j.corsci.2014.10.006 ↗
28. The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions10.1016/0010-938X(92)90074-D ↗
29. The metastable pitting corrosion of 2205 duplex stainless steel under bending deformation10.1016/j.jallcom.2020.154422 ↗
30. Detection of SCC on prestressing steel wire by the simultaneous use of electrochemical noise and acoustic emission measurements10.1016/j.electacta.2006.12.085 ↗
31. Application of electrochemical noise to monitor stress corrosion cracking of stainless steel in tetrathionate solution under constant load10.1016/j.corsci.2012.05.017 ↗
32. Metastable pitting corrosion of stainless steel and the transition to stability