journal article·2023-03Open access

Revealing the dynamic recrystallization mechanism, extrusion deformation mechanism, and tensile deformation behavior of Mg–6Al–1Zn–1.1Sc alloy

Lei Zhang, Honggang Zhang, Yanzhuo Liu, Shuai Yuan, Jinhui Wang, Lijia Chen, Peipeng Jin

Abstract

In this study, extruded deformed billet and extruded rod of Mg–6Al–1Zn–1.1Sc (wt. %) alloy were characterized by optical microscopy (OM) and electron backscatter diffraction (EBSD). The room temperature tensile properties and deformation behavior of extruded alloy were investigated using a universal testing machine and the visco-plastic self-consistent (VPSC) model. The results indicated that the coarse deformed grains (DGs) progressively disappeared and the degree of dynamic recrystallization (DRX) of the alloy increased as the sampling position approached the outlet of the extrusion die. In addition, the grain boundary strengthening induced by DRX increased the corresponding Vickers hardness. DRX mechanisms during extrusion included discontinuous DRX, continuous DRX, twin-induced DRX, and particle-stimulated nucleation (PSN). The EBSD-based in-grain misorientation axes (IGMA) analysis revealed that the slip modes within DGs were dominated by prismatic slip in the early stages of extrusion and by multiple slip modes in the later stages. The yield strength, ultimate tensile strength, and elongation of the extruded alloy were 172.4 MPa, 290.1 MPa, and 26.9%, respectively. The combination of grain boundary strengthening, texture strengthening, and secondary phase strengthening resulted in the high yield strength. The VPSC model well simulated the tensile deformation of the extruded alloy with (0001)//ED (extrusion direction) fiber texture. The superior plasticity of the extruded alloy was ascribed to the high Schmid factor (SF) of the non-basal slip and the activation of the non-basal slip facilitated by the reduction in the ratio of the critical resolved shear stress (CRSS) between the non-basal slip and the basal slip.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. Substantial improvement in cold formability of concentrated Mg–Al–Zn–Ca alloy sheets by high temperature final rolling10.1016/j.actamat.2021.117328 ↗
2. Deformation mechanisms of Mg-Ca-Zn alloys studied by means of micropillar compression tests10.1016/j.actamat.2021.117151 ↗
3. An investigation of the deformation and cracking mechanism of Mg–1Al–12Y alloys based on in-situ SEM/EBSD slip trace analysis10.1016/j.msea.2022.144016 ↗
4. Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg–Gd–Ca alloy10.1016/j.actamat.2019.09.058 ↗
5. Solid solution and precipitation strengthening effects in basal slip, extension twinning and pyramidal slip in Mg-Zn alloys10.1016/j.actamat.2021.117374 ↗
6. Microstructure and enhanced mechanical properties of Mg-3Sn alloy with Mn addition10.1088/2053-1591/ac911a ↗
7. Synergistic effect of Mn+Sc additions on the microstructure evolution and mechanical properties of Mg-Gd-Y-Mn-Sc alloy
8. Development of a novel Mg–Y–Zn–Al–Li alloy with high elastic modulus and damping capacity10.1016/j.msea.2020.139744 ↗
9. Investigation of the alloying effect on deformation behavior in Mg by Visco-Plastic Self-Consistent modeling10.1016/j.jma.2019.07.009 ↗
10. Origins of high ductility exhibited by an extruded magnesium alloy Mg-1.8Zn-0.2Ca: experiments and crystal plasticity modeling10.1016/j.jmst.2020.12.047 ↗
11. Dislocation behavior in a polycrystalline Mg-Y alloy using multi-scale characterization and VPSC simulation10.1016/j.jmst.2021.03.087 ↗
12. Age hardening response and microstructure of Mg–8Sn–4Al alloy with Ag, Sc addition10.1016/j.msea.2022.143596 ↗
13. Influence of Sc on the microstructure, degradation behavior, biocompatibility in vitro and mechanical property of Mg-2Zn-0.2Zr alloy10.1016/j.matdes.2022.110863 ↗
14. Influence of simultaneous alloying with Ca and Sc on the high temperature deformation mechanism, texture, and recrystallization behavior of Mg-Ca-Sc alloys10.1016/j.matchar.2021.111343 ↗
15. Investigation on the corrosion behavior of single-phase and binary-phase Mg-Sc alloys: an experimental and first-principles study10.1016/j.matchar.2021.111294 ↗
16. Effect of Sc/Sm microalloying on microstructural and properties of Mg-2Zn-0.3Ca biodegradable alloy10.1016/j.jallcom.2022.164533 ↗
17. Determination of α/β phase boundaries and mechanical characterization of Mg-Sc binary alloys10.1016/j.msea.2016.06.028 ↗
18. Age-hardening effect by phase transformation of high Sc containing Mg alloy10.1016/j.matlet.2015.06.057 ↗
19. Activation of non-basal slip in coarse-grained Mg-Sc alloy10.1016/j.scriptamat.2022.114830 ↗
20. A lightweight shape-memory magnesium alloy10.1126/science.aaf6524 ↗
21. Martensitic transformation mechanism of Mg-Sc lightweight shape memory alloys10.1016/j.scriptamat.2021.114316 ↗
22. The influence of Sc addition on microstructure and tensile mechanical properties of Mg–4.5Sn–5Zn alloys10.1016/j.jma.2019.05.004 ↗
23. Effect of minor Sc on the microstructure and mechanical properties of AZ91 Magnesium Alloy10.1016/j.pnsc.2018.01.006 ↗
24. Hot deformation behavior, processing map, microstructure evolution and dynamic recrystallization mechanism of Mg-5Al-0.6Sc alloy10.1016/j.jallcom.2022.166244 ↗
25. Roles of twinning and slipping in tensile anisotropy of rolled Mg–3Al–Zn alloy10.1016/j.msea.2021.141748 ↗
26. Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion10.1016/j.msea.2021.142143 ↗
27. Effect of different c/a ratio on the microstructure and mechanical properties in magnesium alloys processed by ECAP10.1016/j.actamat.2015.12.050 ↗
28. Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion10.1016/j.actamat.2018.04.003 ↗
29. Influence of nano-diamond content on the microstructure, mechanical and thermal properties of the ZK60 composites10.1016/j.jma.2021.03.034 ↗
30. Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy10.1016/j.actamat.2020.01.017 ↗
31. Softening and dynamic recrystallization in magnesium single crystals during c-axis compression10.1016/j.actamat.2011.10.013 ↗
32. Deformation behavior of AZ31 Mg alloys sheet during large strain hot rolling process: a study on microstructure and texture evolutions of an intermediate-rolled sheet10.1016/j.jallcom.2015.12.063 ↗
33. Hot deformation behavior, microstructure evolution and slip system of Mg-2Zn-0.5Mn-0.2Ca alloy10.1016/j.jmrt.2022.10.012 ↗
34. Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation10.1016/j.matdes.2013.12.072 ↗
35. An improved kinetics model to describe dynamic recrystallization behavior under inconstant deformation conditions10.1557/jmr.2016.325 ↗
36. A self-consistent viscoplastic model: prediction of rolling textures of anisotropic polycrystals10.1016/0921-5093(94)91047-2 ↗
37. A model for texture development dominated by deformation twinning: application to zirconium alloys10.1016/0956-7151(91)90083-D ↗
38. Investigations on the tensile deformation of pure Mg and Mg–15Gd alloy by in-situ X-ray synchrotron radiation and visco-plastic self-consistent modeling
39. Asymmetry evolutions in microstructure and strain hardening behavior between tension and compression for AZ31 magnesium alloy10.1016/j.msea.2022.143168 ↗
40. Research on deformation mechanism of AZ31 magnesium alloy sheet with non-basal texture during uniaxial tension at room temperature: a visco-plastic self-consistent analysis10.1016/j.jma.2020.12.008 ↗
41. Effect of Sn addition on the deformation behavior and microstructural evolution of Mg-Gd-Y-Zr alloy during hot compression10.1016/j.msea.2021.142026 ↗
42. The hot deformation behavior, microstructure evolution and texture types of as-cast Mg–Li alloy10.1016/j.jallcom.2020.154868 ↗
43. Microstructure evolution and constitutive relation establishment of extruded Mg-1Al-6Y alloy under high speed impact10.1016/j.jallcom.2022.164540 ↗
44. Hot tensile deformation behavior of extruded Laz532 alloy with heterostructure10.1016/j.msea.2020.140412 ↗
45. The microstructure evolution and mechanical properties improvement of the AZ61 alloy by adding Sc10.1088/2053-1591/ac3f5f ↗
46. Effect of long-period ordered stacking on twinning behavior and mechanical properties of Mg-Al-Y alloy during uniaxial hot compression10.1016/j.jmst.2022.09.041 ↗
47. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗
48. A study of the heterogeneity of plastic deformation in IF steel by EBSD10.1016/j.msea.2012.03.068 ↗
49. Modeling dynamic recrystallization behavior in a novel HIPed P/M superalloy during high-temperature deformation10.3390/ma15114030 ↗
50. Isothermal compression bonding mechanism and mechanical properties of WE43 magnesium-rare earth alloy10.1016/j.msea.2021.141664 ↗
51. Hot tensile deformation behavior and microstructure evolution of Mg-1Al-6Y alloy10.1088/2053-1591/ac34b6 ↗
52. Twin recrystallization mechanisms in a high strain rate compressed Mg-Zn alloy10.1016/j.jma.2019.12.011 ↗
53. Hot deformation behavior and microstructure evolution of Mg-Gd-Y(-Sm)-Zr alloys10.1016/j.jallcom.2022.165937 ↗
54. Effect of thermo-mechanical processing parameters on the dynamic restoration mechanism in an Mg-4Y-2Nd-1Sm-0.5Zr alloy during hot compression10.1016/j.jmst.2021.02.036 ↗
55. Strong crystal size effect on deformation twinning10.1038/nature08692 ↗
56. Grain size effect on tensile properties and slip systems of pure magnesium10.1016/j.actamat.2020.116604 ↗
57. Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy10.1016/j.actamat.2016.12.058 ↗
58. Rollett · 2004 · 1
59. Particle effects on recrystallization in magnesium-manganese alloys: particle-stimulated nucleation10.1016/j.actamat.2009.02.032 ↗
60. Texture, local misorientation, grain boundary and recrystallization fraction in pipeline steels related to hydrogen induced cracking10.1016/j.msea.2014.10.009 ↗
61. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
62. Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy10.1016/j.jallcom.2016.04.185 ↗
63. Investigation of prism ⟨a⟩ slip in warm-rolled AZ31 alloy10.1007/s11661-011-0800-2 ↗
64. Texture evolution and fracture behavior of friction-stir-welded non-flammable Mg–Al–Ca alloy extrusions10.1016/j.msea.2020.140090 ↗
65. On the structure, transformation and deformation of long-period stacking ordered phases in Mg-Y-Zn alloys10.1007/s11661-014-2301-6 ↗
66. Quasi in-situ EBSD analysis of twinning-detwinning and slip behaviors in textured AZ31 magnesium alloy subjected to compressive-tensile loading10.1016/j.jma.2021.08.025 ↗
67. Excellent ductility and strong work hardening effect of as-cast Mg-Zn-Zr-Yb alloy at room temperature10.1016/j.jallcom.2017.09.016 ↗
68. Analysis of strain hardening behavior in a ductile Mg–Yb based alloy10.1016/j.msea.2021.141462 ↗
69. Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy10.1016/j.actamat.2011.02.035 ↗
70. Deformation twinning in rolled WE43-T5 rare earth magnesium alloy: influence on strain hardening and texture evolution10.1016/j.actamat.2017.03.075 ↗
71. Strain hardening, twinning and texture evolution in magnesium alloy using the all twin variant polycrystal modelling approach10.1016/j.ijplas.2020.102660 ↗
72. Deformation mechanisms and differential work hardening behavior of AZ31 magnesium alloy during biaxial deformation10.1016/j.jma.2020.09.022 ↗
73. Underlying mechanisms of variation in yield asymmetry and strain hardening behavior of extruded pure Mg with Gd addition
74. Solute strengthening of prismatic slip, basal slip and {1012} twinning in Mg and Mg-Zn binary alloys10.1016/j.ijplas.2013.01.012 ↗