journal article·2023-03Open access

Ablation oxidation and surface quality during laser polishing of TA15 aviation titanium alloy

Pengfei Li, Yuhang Wang, Liangliang Li, Yadong Gong, Jianzhong Zhou, Jinzhong Lu

Abstract

TA15 titanium alloy is sensitive to temperature, and it is one of the main materials used in aircraft bearing parts that operate for long periods of time at 500 °C. The thermomechanical processing of this alloy is difficult to control because of its high activity and oxidation. In the present research, nanosecond pulse lasers of various powers were used to polish the TA15 surface. The surface morphology, microstructure evolution, oxidation depth and mechanical properties were investigated. The results revealed that the initial sample has a rough surface, and both high-power and low-power lasers can significantly decrease the surface roughness. Three methods, SEM morphology analysis, EDS line scanning and EDS mapping, are used to detect the oxidation depth of the polished zone. The TEM images and XRD patterns show typical Al2O3, Ti2O3 and TiO2 constituents, which affect the tensile strength of the alloy. A low-power laser has a better polishing effect than a high-power laser; the oxidation depth with a high power is approximately 100 μm, while the oxidation depth with a low power is less than 10 μm. The polished surface roughness parameters Ra (arithmetical mean deviation of the profile) and Sa (arithmetical mean height of the scale limited surface) obtained with a low-power laser are reduced from approximately 6 μm–3.197 μm and 4.298 μm, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Laser Material Processing Techniques · Additive Manufacturing Materials and Processes · Laser-induced spectroscopy and plasma

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Investigation of tensile and high cycle fatigue failure behavior on a TIG welded titanium alloy10.1016/j.intermet.2021.107115 ↗
2. Mesoscale deformation mechanisms in relation with slip and grain boundary sliding in TA15 titanium alloy during tensile deformation10.1016/j.jmst.2021.05.008 ↗
3. Microstructure evolution and mechanical behavior of laser melting deposited TA15 alloy at 500° C under in-situ tension in SEM10.1007/s40195-021-01214-4 ↗
4. Effect of laser remelting processing on microstructure and mechanical properties of 17-4 PH stainless steel during laser direct metal deposition10.1016/j.jmatprotec.2020.116738 ↗
5. Experimental evaluation of surface generation and force time-varying characteristics of curvilinear grooved micro end mills fabricated by EDM10.1016/j.jmapro.2021.11.049 ↗
6. Finishing of additively manufactured titanium alloy by shape adaptive grinding (SAG)10.1088/2051-672X/3/2/024001 ↗
7. The influence of chemical polishing of titanium scaff olds on their mechanical strength and in-vitro cell response10.1016/j.msec.2018.04.019 ↗
8. A novel approach of chemical mechanical polishing for a titanium alloy using an environment-friendly slurry10.1016/j.apsusc.2017.08.064 ↗
9. The effect of HF-HNO3 chemical polishing on the surface roughness and fatigue life of laser powder bed fusion produced Ti6Al4V
10. Nanoindentation and Xps Studies of Titanium Tnz Alloy after Electrochemical Polishing in a Magnetic Field10.3390/ma8010205 ↗
11. Study on surface shape control of pure Ti fabricated by electron beam melting using electrolytic polishing10.1016/j.surfcoat.2017.05.061 ↗
12. Evolution of surface integrity and fatigue properties after milling, polishing, and shot peening of TC17 alloy blades10.1016/j.ijfatigue.2020.105630 ↗
13. Evolution and empirical modeling of compressive residual stress profile after milling, polishing and shot peening for TC17 alloy10.1016/j.jmapro.2017.02.002 ↗
14. Surface integrity evolution and fatigue evaluation after milling mode, shot-peening and polishing mode for TB6 titanium alloy10.1016/j.apsusc.2016.06.162 ↗
15. Nano-finishing of bio-titanium alloy to generate different surface morphologies by changing magnetorheological polishing fluid compositions10.1016/j.precisioneng.2017.08.003 ↗
16. CFD-based study of the abrasive fl ow characteristics within constrained fl ow passage in polishing of complex titanium alloy surfaces10.1016/j.powtec.2018.04.046 ↗
17. A generic approach of polishing metals via isotropic electrochemical etching10.1016/j.ijmachtools.2020.103517 ↗
18. Laser polishing of 3D printed metallic components: a review on surface integrity10.1016/j.matpr.2020.02.443 ↗
19. Surface and property characterization of laser polished Ti6Al4V10.1016/j.surfcoat.2019.125016 ↗
20. Laser polishing of additive manufactured CoCr alloy components with complex surface geometry10.1016/j.jmatprotec.2018.06.019 ↗
21. Surface characteristics of laser polished Ti-6Al-4V parts produced by electron beam melting additive manufacturing process10.1007/s00170-021-06861-6 ↗
22. Laser polishing for improving fatigue performance of additive manufactured Ti-6Al-4V parts10.1016/j.optlastec.2020.106639 ↗
23. Fundamental study of the bulge structure generated in laser polishing process10.1016/j.optlaseng.2018.03.006 ↗
24. Numerical analyses of molten pool evolution in laser polishing Ti6Al4V10.1016/j.jmapro.2020.08.045 ↗
25. Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components
26. Surface prediction model for thermocapillary regime pulsed laser micro polishing of metals10.1016/j.jmapro.2015.05.005 ↗
27. Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing10.1016/j.ijmachtools.2021.103745 ↗
28. Laser polishing of 3D printed mesoscale components10.1016/j.apsusc.2017.01.211 ↗
29. Ti surface laser polishing: effect of laser path and assist gas10.1016/j.procir.2015.06.102 ↗
30. Laser polishing of additive manufactured Ti alloys10.1016/j.optlaseng.2017.02.005 ↗
31. Laser polishing of Ti6Al4V fabricated by selective laser melting10.3390/met10020191 ↗
32. Effects of laser polishing on surface microstructure and corrosion resistance of additive manufactured CoCr alloys10.1016/j.apsusc.2018.02.246 ↗
33. Study on surface state and thermophysical properties of TA15 alloy by laser ablation10.1016/j.jmapro.2020.12.054 ↗
34. Reoxidation process and corrosion behavior of TA15 alloy by laser ablation10.1007/s12598-020-01553-8 ↗
35. Removal mechanism of surface cleaning on TA15 titanium alloy using nanosecond pulsed laser10.1016/j.optlastec.2021.106998 ↗
36. Investigation into a novel pulsating cavitation air jet polishing method for Ti-6Al-4V alloy10.1016/j.triboint.2022.107837 ↗
37. Review on mechanism and process of surface polishing using lasers10.1007/s11465-019-0535-0 ↗
38. Microstructure evolution and mechanical properties of in-situ Ti6Al4V–TiB composites manufactured by selective laser melting10.1016/j.compositesb.2020.108567 ↗
39. Material morphological characteristics in laser ablation of alpha case from titanium alloy10.1016/j.apsusc.2012.04.173 ↗
40. Laser processing of titanium aluminides10.1361/105994900770345629 ↗
41. Analysis of damage threshold on HgCdTe crystal irradiated by multi-pulsed CO2 laser10.1016/j.optlastec.2013.10.023 ↗