journal article·2023-05Open access

Growth kinetics and IMCs layer analysis of SAC305 solder with the reinforcement of SiC during the isothermal aging condition

Manoj Kumar Pal, Gréta Gergely, Zoltán Gácsi

Abstract

The Sn–3.0wt.%Ag–0.5wt.%Cu(SAC305) - xSiC composite solder was prepared by powder metallurgy method with the addition of SiC ceramic reinforcement with various compositions (0, 0.5, 1, and 1.5wt.%). The IMC layer thickness of Cu3Sn and Cu6Sn5 was suppressed during 100 h aging and the minimum thickness was found for 1.0wt.% SiC addition. The SAC305-1.0wt.%SiC/Cu was then subjected to different aging conditions (413, 423, 433, and 443 K). The IMCs thickness at the Cu-solder interface was investigated by using FIB-SEM and image analysis software (ImageJ). The SiC and Ag3Sn particles were identified in the matrix's bulk area, and the growth kinetics were examined in a detailed manner in aging conditions. Diffusion coefficients and activation energies for the two mentioned IMCs were plotted as a temperature function, and the values were calculated by the Arrhenius equation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Investigation of microstructure and wetting behavior of Sn–3.0Ag–0.5Cu(SAC305) lead-free solder with additions of 1.0 wt % SiC on copper substrate10.1016/j.intermet.2020.106991 ↗
2. Cu/Sn interfacial reactions: thin-film case versus bulk case10.1016/S0254-0584(97)80016-8 ↗
3. Microstructure and intermetallic growth effects on shear and fatigue strength of solder joints subjected to thermal cycling aging10.1016/S0921-5093(00)01958-4 ↗
4. Influence of TiO2 nanoparticles on IMC growth in Sn–3.0Ag–0.5Cu–xTiO2 solder joints in reflow process10.1016/j.jallcom.2012.12.019 ↗
5. Effects of nano-Al2O3 particles on microstructure and mechanical properties of Sn–3.5Ag–0.5Cu composite solder ball grid array joints on Sn/Cu pads10.1016/j.matdes.2013.03.045 ↗
6. Effect of nano–Fe2O3 additions on wettability and interfacial intermetallic growth of low–Ag content Sn-Ag-Cu solders on Cu substrates10.1016/j.jallcom.2014.12.024 ↗
7. Effect of ZnO micron-particles on properties and intermetallic compound layers of a Sn–3.0Ag–0.5Cu solder
8. Growth mechanism of intermetallic compounds and damping properties of Sn–Ag–Cu-1wt% nano-ZrO2 composite solders10.1016/j.microrel.2014.01.026 ↗
9. Quasi-in-situ observation on diffusion anisotropy dominated asymmetrical growth of Cu-Sn IMCs under temperature gradient10.1016/j.actamat.2021.117168 ↗
10. Interfacial reaction and IMC growth of an ultrasonically soldered Cu/SAC305/Cu structure during isothermal aging10.3390/ma11010084 ↗
11. Thermal analysis and mechanical properties of Sn–1.0Ag–0.5Cu solder alloy after modification with SiC nano-sized particles10.1007/s10854-013-1200-8 ↗
12. Microstructure, mechanical properties, and deformation behavior of Sn–1.0Ag–0.5Cu solder after Ni and Sb additions10.1016/j.matdes.2012.06.058 ↗
13. Improvement on the microstructure stability, mechanical and wetting properties of Sn–Ag–Cu lead-free solder with the addition of rare earth elements10.1016/j.jallcom.2004.01.012 ↗
14. Solid-state intermetallic compound layer growth between copper and 95.5Sn–3.9Ag–0.6Cu solder10.1007/s11664-004-0026-9 ↗
15. Morphology, kinetics, and thermodynamics of solid-state aging of eutectic SnPb and Pb-free solders (Sn–3.5Ag, Sn–3.8Ag–0.7Cu and Sn–0.7Cu) on Cu10.1557/JMR.2002.0042 ↗
16. Solid-state reactions between Cu (Ni) alloys and Sn10.1007/s11664-007-0251-0 ↗
17. Effect of electromigration on intermetallic compound formation in line-type Cu/Sn/Cu interconnect10.1016/j.jallcom.2010.05.158 ↗
18. Influence of nanoparticle addition on the formation and growth of intermetallic compounds (IMCs) in Cu/Sn–Ag-Cu/Cu solder joint during different thermal conditions10.1088/1468-6996/16/3/033505 ↗
19. Distribution and microstructure analysis of ceramic particles in the lead-free solder matrix10.1002/crat.202000123 ↗
20. Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripening10.1103/PhysRevB.53.16027 ↗
21. A review of intermetallic compound growth and void formation in electrodeposited Cu–Sn Layers for microsystems packaging10.1007/s10854-021-05412-9 ↗
22. Review Progress in Ostwald ripening theories and their applications to nickel-base superalloys Part I: Ostwald ripening theories10.1023/A:1015388912729 ↗
23. Effect of nano-TiO2 addition on the microstructure and bonding strengths of Sn–3.5Ag–0.5Cu composite solder BGA packages with immersion Sn surface finish10.1007/s10854-011-0327-8 ↗
24. Effect of SiC nanoparticle additions on microstructure and microhardness of Sn-Ag-Cu solder alloy10.1007/s11664-007-0366-3 ↗
25. Effect of Y2O3 particles on microstructure formation and shear properties of Sn-58Bi solder10.1007/s10854-009-0025-y ↗
26. A diffusion model and growth kinetics of interfacial intermetallic joints10.1016/j.jallcom.2019.152893 ↗
27. Ostwald–Freundlich diffusion-limited dissolution kinetics of nano particles10.1016/j.powtec.2014.01.095 ↗
28. Gibbs–Thomson effects in phase transformations10.1016/j.scriptamat.2004.12.026 ↗
29. Growth of η phase scallops and whiskers in liquid tin-solid copper reaction couples10.1007/s11837-001-0100-1 ↗
30. Kinetic theory of flux-driven ripening10.1103/PhysRevB.66.115403 ↗
31. Direct evidence for a Cu–enriched region at the boundary between Cu6Sn5 and Cu3Sn during Cu/Sn reaction10.1016/j.scriptamat.2010.04.011 ↗
32. Bismuth redistribution induced by intermetallic compound growth in SnBi/Cu microelectronic interconnect10.1007/s10853-008-3118-8 ↗
33. Evolution of nano–Ag3Sn particle formation on Cu–Sn intermetallic compounds of Sn–3.5Ag–0.5Cu composite solder/Cu during soldering10.1016/j.jallcom.2010.11.010 ↗
34. Interfacial reactions between lead-free solders and common base materials10.1016/j.mser.2005.03.001 ↗
35. Evolution of intermetallic compounds between Sn–0.3Ag–0.7Cu low–silver lead–free solder and Cu substrate during thermal aging10.1016/S1005-0302(12)60023-1 ↗
36. Analysis of low-temperature intermetallic growth in copper-tin diffusion couples10.1007/BF02675563 ↗
37. The growth of Cu–Sn intermetallics at a pretinned copper-solder interface10.1007/BF02665064 ↗
38. Okamoto · 1990
39. Evolutions of the interface and shear strength between SnAgCu–xNi solder and Cu substrate during isothermal aging at 150 °C10.1016/j.jallcom.2009.06.171 ↗
40. Intermetallics Interfacial reactions of eutectic Sn3.5Ag and pure tin solders with Cu substrates during liquid-state soldering10.1016/j.intermet.2012.02.023 ↗
41. Effect of Sn/Cu thickness ratio on the transformation law of Cu6Sn5 to Cu3Sn in Sn/Cu interface during aging10.1088/2053-1591/aad126 ↗
42. Dependence of intermetallic compound formation on the sublayer stacking sequence in Ag–Sn bilayer thin films10.1016/j.actamat.2015.09.042 ↗
43. Suppression of interdiffusion-induced voiding in oxidation of copper nanowires with twin-modified surface10.1038/s41467-017-02154-3 ↗
44. The growth behavior of interfacial intermetallic compound between Sn–3.5Ag–0.5Cu solder and Cu substrate under different thermal-aged conditions10.1007/s10854-017-7799-0 ↗
45. Influence of third elements on growth of Nb3Sn compounds and on global pinning force10.1007/BF01114703 ↗
46. Interdependent intermetallic compound growth in an electroless Ni-P/Sn-3.5Ag reaction couple10.1007/s11664-010-1447-2 ↗
47. Interfacial microstructure and the kinetics of interfacial reaction in diffusion couples between Sn–Pb solder and Cu/Ni/Pd metallization10.1016/S1359-6454(00)00165-8 ↗
48. Growth mechanism of Ni3Sn4 in a Sn/Ni liquid/solid interfacial reaction10.1016/j.actamat.2009.07.021 ↗
49. Activation energies of intermetallic growth of Sn-Ag eutectic solder on copper substrates10.1007/s11664-997-0268-4 ↗
50. Intermetallic compound layer growth between SnAgCu solder and Cu substrate in electronic packaging10.1007/s10854-013-1236-9 ↗