journal article·2023-09Open access

Influence of nanoparticle size on the mechanical and tribological characteristics of TiO2 reinforced epoxy composites

Sadaf Bashir Khan, Nan li, Shenggui Chen, Jiahua Liang, Chuang Xiao, Xiaohong Sun

Abstract

Photosensitive resins (PSR) were exposed to challenging operational conditions in different technological domains. It is desirable to enhance the mechanical durability of PSR for its usage in real-world applications. We use TiO2 to improve the mechanical strength and durability of PSR and comprehend nanoparticles' impact on PSR's durability. Herein, we compare the mechanical properties of photosensitive resins (PSR) and TiO2-based polymer nanocomposites (T@PNCs) with varying nanoparticle sizes [1 μm and 20 nm]. Firstly, the ultrasonic dual mixing (UDM) technique is employed, which involves the simultaneous use of ultrasonic mixing and stirring to produce nanocomposites of T@PNCs slurry. Before printing, the initial designs were created using solidworks software, and 3D-Printing was performed using a 3D Moon Ray Printer. Rod and flat specimens were printed, and their structural and mechanical strength were analyzed. The experimental results suggest that larger nanoparticles, measuring 1 μm, decrease the mechanical durability of T@PNCs. However, reducing the size of nanoparticles in polymer nanocomposites (PNCs) to 20 nm increases mechanical resilience, leading to improved flexural and tensile strength. Our experimental results demonstrate that the nanoparticles' size strongly influences PSR's mechanical properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Effect of the type, size and concentration of solid lubricants on the tribological properties of the polymer PEEK10.1016/j.wear.2016.06.013 ↗
2. The growth and bonding of transfer film and the role of CuS and PTFE in the tribological behavior of PEEK10.1016/0043-1648(95)90026-8 ↗
3. Synergistic effect of small molecules on large-scale structure of simplified industrial nanocomposites10.1021/acs.macromol.7b00954 ↗
4. Laser-based additively manufactured polymers: a review on processes and mechanical models10.1007/s10853-020-05254-6 ↗
5. Enhanced tribological performance of PEEK/SCF/PTFE hybrid composites by graphene10.1039/C7RA04969B ↗
6. Ultrasonic dispersion of inorganic nanoparticles in epoxy resin10.1016/j.ultsonch.2009.01.006 ↗
7. Affordable biocidal ultraviolet cured cuprous oxide filled vat photopolymerization resin nanocomposites with enhanced mechanical properties10.3390/biomimetics7010012 ↗
8. Tribological behavior of PEEK components with compositionally graded PEEK/PTFE surfaces10.1016/j.wear.2006.03.045 ↗
9. Surface roughness optimization of poly-jet 3D printing using Grey Taguchi Method
10. Polytetrafluoroethylene (PTFE) fiber reinforced polyetheretherketone (PEEK) composites10.1016/j.wear.2010.12.003 ↗
11. Influence of PTFE content in PEEK–PTFE blends on mechanical properties and tribo-performance in various wear modes10.1016/j.wear.2004.10.008 ↗
12. Review of polymer self-lubricating coatings10.1088/1755-1315/526/1/012077 ↗
13. Sliding wear behaviour of PEEK-PTFE blends10.1002/jsl.3000200305 ↗
14. Highly dispersed nanosilica–epoxy resins with enhanced mechanical properties10.1016/j.polymer.2008.06.023 ↗
15. Scaffold development using 3D printing with a starch-based polymer10.1016/S0928-4931(02)00012-7 ↗
16. Effect of various type of nanoparticles on mechanical and tribological properties of wear-resistant PEEK + PTFE-based composites10.3390/ma14051113 ↗
17. Tuning optical, dielectric, and electrical properties of Polyethylene oxide/Carboxymethyl cellulose doped with mixed metal oxide nanoparticles for flexible electronic devices10.1016/j.molstruc.2022.134244 ↗
18. Study of the photoluminescence, optical, thermal, and electrical parameters of the Cs/PVP blend/zinc oxide nanorods films for energy storage devices10.1016/j.polymertesting.2023.108093 ↗
19. Synthesis and characterization of sodium alginate/polyvinyl alcohol/zinc oxide/iron oxide nanocomposites for electrochemical applications10.1002/pc.27203 ↗
20. Correction: tailoring the structural, optical, dielectric, and electrical properties of PEO/PVA blend using graphene nanoplates for energy storage devices10.1007/s10854-022-09228-z ↗
21. The effect of absorbed solvent on the flexural characteristics of 3D-printed photosensitive polymers
22. 3D printed PEEK/HA composites for bone tissue engineering applications: effect of material formulation on mechanical performance and bioactive potential10.1016/j.jmbbm.2021.104601 ↗
23. Effect of thermocycling on the flexural and impact strength of urethane-based and high-impact denture base resins
24. An experimental study on the effect of nanomaterials and fibers on the mechanical properties of polymer composites10.3390/buildings12010007 ↗
25. Supramolecular chemistry: host–guest molecular complexes10.3390/molecules26133995 ↗
26. Beyond stretchability: strength, toughness, and elastic range in semiconducting polymers10.1021/acs.chemmater.0c03019 ↗
27. Absorption and strength properties of short carbon fiber reinforced mortar composite10.3390/buildings11070300 ↗
28. A novel approach to enhance mechanical and thermal properties of SLA 3D printed structure by incorporation of metal–metal oxide nanoparticles
29. S
30. 3D printed nanofiltration membrane technology for waste water distillation
31. An overview on 3D printing technology: technological, materials, and applications10.1016/j.promfg.2019.06.089 ↗
32. The application of 3D printing technology in the fashion industry10.1080/17543266.2016.1223355 ↗
33. 3D printing for polymer/particle-based processing: a review10.1016/j.compositesb.2021.109102 ↗
34. Effect of temperature on the mechanical behaviours of a single-ply weave-reinforced shape memory polymer composite10.1016/j.compositesb.2018.09.029 ↗
35. Effect of water absorption in polymers at low and high temperatures10.1016/S0032-3861(98)00560-6 ↗
36. The effect of a superhydrophobic coating on moisture absorption and tensile strength of 3D-printed carbon-fibre/polyamide10.1016/j.compositesa.2021.106380 ↗
37. On the silica surface modification and its effect on charge trapping and transport in PP-based dielectric nanocomposites10.1021/acsapm.0c00349 ↗
38. How the duration and mode of photopolymerization affect the mechanical properties of a dental composite resin10.3390/ma16010113 ↗
39. Current issues in research on structure–property relationships in polymer nanocomposites10.1016/j.polymer.2010.04.074 ↗
40. Interactions between silica nanoparticles and an epoxy resin before and during network formation10.1016/j.polymer.2009.05.020 ↗
41. Impact of imidazolium-based ionic liquids on the curing kinetics and physicochemical properties of nascent epoxy resins10.1021/acs.macromol.0c00783 ↗
42. Improving mechanical and thermal properties of TiO2-epoxy nanocomposite10.1016/j.compositesb.2016.04.080 ↗
43. Topology-controlled thermomechanical properties of diamond nanothread enhanced polymeric materials
44. Epoxy primer topcoat syncretic coating prepared by using modified graphene oxide incorporated with TiO2 nanoparticles10.1016/j.mtsust.2022.100282 ↗
45. A lignin-based epoxy/TiO2 hybrid nanoparticle for multifunctional bio-based epoxy with improved mechanical, UV absorption and antibacterial properties10.1016/j.ijbiomac.2022.04.229 ↗
46. Experimental study on synthesizing TiO2 nanotube/polyaniline (PANI) nanocomposites and their thermoelectric and photosensitive property characterization10.1016/j.compositesb.2011.07.015 ↗
47. Influence of exposure period and angle alteration on the flexural resilience and mechanical attributes of photosensitive resin10.3390/nano12152566 ↗
48. Improved mechanical and viscoelastic properties of CNT-composites fabricated using an innovative ultrasonic dual mixing technique10.1515/jmbm-2020-0008 ↗
49. Influence of ultrasonic dual mixing on thermal and tensile properties of MWCNTs-epoxy composite10.1016/j.compositesb.2015.03.028 ↗
50. Effect of TiO2 nanoparticle size on the performance of PVDF membrane10.1016/j.apsusc.2006.03.090 ↗
51. Characterization of epoxy composites with TiO2 additives and E-glass fibers as reinforcement agent10.4028/www.scientific.net/JNanoR.40.99 ↗
52. Morphological influence of TiO2 nanostructures (nanozigzag, nanohelics and nanorod) on photocatalytic degradation of organic dyes10.1016/j.apsusc.2016.12.172 ↗
53. Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid esters10.1016/j.matdes.2014.05.015 ↗
54. Synthesis and application of Co/TiO2 nanoparticles incorporated carbon nanofibers for direct fuel cell10.1088/1742-6596/1178/1/012006 ↗
55. Study of mechanical and thermal performances of epoxy resin filled with micro particles and nanoparticles10.1016/j.egypro.2017.03.121 ↗
56. Effect of nanoparticles on thermal conductivity of epoxy resin system10.1088/1757-899X/518/6/062006 ↗
57. Influence of the graft length on nanocomposite structure and interfacial dynamics10.3390/nano13040748 ↗
58. Effects of size and aggregation/agglomeration of nanoparticles on the interfacial/interphase properties and tensile strength of polymer nanocomposites10.1186/s11671-018-2624-0 ↗
59. Filler aggregation as a reinforcement mechanism in polymer nanocomposites10.1016/j.mechmat.2013.02.004 ↗
60. Rheological and mechanical properties of PVC/CaCO3 nanocomposites prepared by in situ polymerization10.1016/j.polymer.2004.07.045 ↗
61. Tensile and tribological behaviors of PEEK/nano-SiO2 composites compounded using a ball milling technique10.1016/j.compscitech.2008.06.027 ↗
62. Preparation by melt mixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface-treated nanoparticles10.1002/app.22849 ↗