journal article·2024-03Open access

Wire-arc additive manufacturing of Mg-Gd-Y-Zn-Zr alloy fabricated by cold metal transfer heat source: Processing, microstructure, and mechanical properties

Wenzhe Yang, Haiou Yang, Kuitong Yang, Zihong Wang, Xinghua Wang, Chenghui Hu, Xin Lin

Abstract

With the development of aerospace, Mg-Gd-Y-Zn-Zr alloy as a high-performance light alloy has attracted much attention. In this paper, the Mg-8.8Gd-3.9Y-0.85Zn-0.45Zr (wt%, GWZ941) alloy single-pass multilayer components fabricated by cold metal transfer wire and arc additive manufacturing (CMT-WAAM) in CMT mode, CMT-P mode and CMT-Advance mode. Studying the effects of the three CMT characteristics on voltage and current waveforms and metal transfer behaviors of the deposition processes for the GWZ941 alloy. The macro morphology, defect distribution, microstructure, and mechanical properties of the three as-deposited samples were compared. The GWZ941 alloy deposit fabricated by CMT-WAAM exhibits a uniform equiaxed grain structure whose average grain size of the three samples was 11.9 μm, 13.9 μm, and 7.9 μm, with the porosity less than 0.01%. The UTS and EL of the three GWZ941 alloy samples were 257 ± 4 MPa and 7.5 ± 1%, 230 ± 8 MPa and 3.5 ± 1%, 253 ± 2 MPa and 7.0 ± 0.3%, respectively. In the presence of oxide particles in the GWZ941 alloy formed by CMT-WAAM, the oxide content is less than 0.08%, which is the main influencing factor for the reduced strength and plasticity of the GWZ941 alloy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Recent progress and perspectives in additive manufacturing of magnesium alloys10.1016/j.jma.2022.03.001 ↗
2. A review on casting magnesium alloys: modification of commercial alloys and development of new alloys10.1016/j.jmst.2016.07.001 ↗
3. Recent developments in high-strength Mg-RE-based alloys: focusing on Mg-Gd and Mg-Y systems10.1016/j.jma.2018.08.001 ↗
4. Microstructure evolution and mechanical properties of an ultra-high strength casting Mg-15.6Gd-1.8Ag-0.4Zr alloy10.1016/j.jallcom.2014.07.028 ↗
5. High temperature mechanical behavior of low-pressure sand-cast Mg-Gd-Y-Zr magnesium alloy10.1016/j.jma.2019.07.006 ↗
6. Synergic effects of Gd and Y contents on the age-hardening response and elevated temperature mechanical properties of extruded Mg-Gd(-Y)-Zn-Mn alloys10.1016/j.msea.2021.141019 ↗
7. Microstructure evolution during superplastic deformation process and its impact on superplastic behavior of a Mg-Gd-Y-Zn-Zr alloy10.1016/j.matchar.2021.110879 ↗
8. Effect of pack-forging on microstructure and properties of Mg-Gd-Y-Zn-Zr alloy10.1016/j.msea.2020.140674 ↗
9. A lightweight shape-memory magnesium alloy10.1126/science.aaf6524 ↗
10. A review of magnesium die-castings for closure applications10.1016/j.jma.2019.02.005 ↗
11. Correlation of 3D defect-band morphologies and mechanical properties in high pressure die casting magnesium alloy10.1016/j.jmatprotec.2020.116853 ↗
12. Knezović · 2019 · 65
13. A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)10.1016/j.rcim.2014.08.008 ↗
14. Wire-arc directed energy deposition of magnesium alloys: microstructure, properties and quality optimization strategies10.1016/j.jmrt.2022.07.083 ↗
15. Achieving high performance of wire arc additive manufactured Mg-Y-Nd alloy assisted by interlayer friction stir processing10.1016/j.jmatprotec.2022.117809 ↗
16. An investigation into wire arc additive manufacturing of Mg-Y-RE-Zr alloy10.1016/j.matlet.2022.132922 ↗
17. Microstructural evolution and strengthening mechanism of Mg-Y-RE-Zr alloy fabricated by quasi-directed energy deposition
18. Achieving fully equiaxed grain microstructure and isotropic mechanical properties in wire arc additive-manufactured Mg-Y-Nd-Zr alloys10.1016/j.jallcom.2023.171041 ↗
19. Microstructure evolution and mechanical properties of wire arc additively manufactured Mg-Gd-Y-Zr alloy by post heat treatments10.1080/17452759.2023.2225492 ↗
20. Excellent isotropic mechanical properties of directed energy deposited Mg-Gd-Y-Zr alloys via establishing homogeneous equiaxed grains embedded with dispersed nano-precipitation
21. Macro-micro numerical simulation and experimental study of Mg-Gd-Y-Zn-Zr alloy fabricated by cold metal transfer wire arc additive manufacturing10.1016/j.jmrt.2022.12.193 ↗
22. Uniaxial compression deformation and fracture mechanism of cold metal transfer (CMT) arc additive Mg-Gd-Y-Zn-Zr alloy10.1016/j.msea.2023.145201 ↗
23. High-strength Mg‐10Gd‐3Y‐1Zn‐0.5 Zr alloy fabricated by wire-arc directed energy deposition: phase transformation behavior and mechanical properties
24. Microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy fabricated by cold metal transfer wire arc additive manufacturing10.1016/j.jmrt.2023.10.265 ↗
25. On the excellent strength-ductility synergy of wire-arc directed energy deposited Mg-Gd-Y-Zn-Zr alloy via manipulating precipitates
26. The effect of welding speed on microstructures of cold metal transfer deposited AZ31 magnesium alloy clad10.1016/j.matdes.2015.07.143 ↗
27. Microstructure and mechanical properties of the Mg-Gd-Y-Zn-Zr alloy fabricated by semi-continuous casting10.1016/j.msea.2012.04.018 ↗
28. Microstructure evolution and mechanical properties of a high-strength Mg-10Gd-3Y-1Zn-0.4Zr alloy fabricated by laser powder bed fusion
29. Additive manufactured Mg-Gd-Y-Zr alloys: effects of Gd content on microstructure evolution and mechanical properties
30. Microstructure and mechanical properties of Mg-9Gd-4Y-0.5Zr alloy10.4028/www.scientific.net/MSF.904.15 ↗
31. Influence of friction stir processing and aging heat treatment on microstructure and mechanical properties of selective laser melted Mg-Gd-Zr alloy
32. Microstructure and mechanical behavior of cold metal transfer welded Mg/Al dissimilar joint using wire AZ31 as filler metal10.1080/13621718.2016.1245240 ↗
33. Characterization the contribution and limitation of the characteristic processing parameters in cold metal transfer deposition of an Al alloy10.1016/j.jmatprotec.2017.02.019 ↗
34. A heat source model for cold metal transfer (CMT) welding10.1007/s10973-015-4809-4 ↗
35. Wire-arc additive manufacturing of AZ31 magnesium alloy fabricated by cold metal transfer heat source: processing, microstructure, and mechanical behavior10.1016/j.jmatprotec.2020.116895 ↗
36. Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V10.1016/j.jallcom.2018.07.235 ↗
37. Microstructure and deformation behavior of Ti-6Al-4V alloy by high-power laser solid forming10.1016/j.actamat.2017.04.026 ↗
38. Improved fatigue properties of laser powder bed fusion of Al-4.74Mg-0.70Sc-0.32Zr alloy via hot isostatic pressing10.1080/21663831.2022.2088252 ↗