Two-step method for predicting Young's modulus of nanocomposites containing nanodiamond particles
Source abstract
Abstract
In this study, a sophisticated two-step methodology is proposed that incorporates the Kolarik and Hashin–Hansen models to precisely evaluate the effects of the interphase on the Young's modulus of nanodiamond (ND)-filled composites. Initially, the ND particles and their surrounding interphase were modeled as a core-shell structure, and the modulus of this structure was calculated. Subsequently, the core-shell particles were considered as a dispersed phase within a polymer matrix, leading to determination of the Young's modulus of the nanocomposite. The results obtained using the proposed method agreed well the experimental data of various nanocomposite samples. Furthermore, a robust correlation was indicated between the interphase properties and nanocomposite modulus. Notably, an interphase characterized by a thickness of 10 nm, modulus of 50 GPa, and a filler volume fraction of 0.02 increased the nanocomposite modulus to more than 3 GPa, assuming a matrix modulus of 1 GPa. Additionally, the findings revealed that ND particles with radii smaller than 4 nm had a remarkable influence on the nanocomposite modulus, whereas a high ND modulus had a minimal effect.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Carbon Nanotubes in Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Reinforcement of a PMMA resin for fixed interim prostheses with nanodiamonds10.4012/dmj.2010-135 ↗
2. Active sites determination and de-aggregation of detonation nanodiamond particles
3. Surface optimization of detonation nanodiamonds for the enhanced mechanical properties of polymer/nanodiamond composites10.1016/j.diamond.2020.107897 ↗
4. Ultrasmall nanodiamonds: perspectives and questions10.1021/acsnano.2c00197 ↗
5. Nano-mechanical approach to study the behavior of annealed nanodiamond reinforced epoxy nanocomposites10.1002/pc.27297 ↗
6. Microscopic insight into nanodiamond polymer composites: reinforcement, structural, and interaction properties10.1039/D0NR07780A ↗
7. Enhancing cryogenic thermal conductivity of epoxy composites through the incorporation of boron nitride nanosheets/nanodiamond aerogels prepared by directional-freezing method10.1002/pc.27947 ↗
8. Nanodiamond/cellulose nanocrystals composite-based acoustic humidity sensor10.1016/j.snb.2022.132748 ↗
9. The properties and applications of nanodiamonds10.1201/9780429399039-11 ↗
10. Nanodiamond–polymer composites10.1016/j.diamond.2015.07.003 ↗
11. A critical review of nanodiamond based nanocomposites: synthesis, properties and applications10.1016/j.compositesb.2018.01.028 ↗
12. Polymer/nanodiamond composites-a comprehensive review from synthesis and fabrication to properties and applications10.1016/j.cis.2019.04.006 ↗
13. Stimuli-responsive nanodiamond–polyelectrolyte composite films10.3390/polym12030507 ↗
14. Highly enhanced mechanical properties in natural rubber prepared with a nanodiamond nanomatrix structure10.1016/j.polymer.2017.08.025 ↗
15. UHMWPE/nanodiamond nanocomposites for orthopaedic applications: a novel sandwich configuration based approach10.1016/j.jmbbm.2021.104327 ↗
16. Poly (vinyl alcohol) nanocomposites with nanodiamond10.1021/ma200176r ↗
17. Modeling the strength and thickness of the interphase in polymer nanocomposite reinforced with spherical nanoparticles by a coupling methodology10.1016/j.jcis.2015.09.025 ↗
18. Attempts to simulate the modulus of polymer/carbon nanotube nanocomposites and future trends10.1080/15583724.2013.870574 ↗
19. A simple model for constant storage modulus of poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanocomposites at low frequencies assuming the properties of interphase regions and networks10.1016/j.jmbbm.2018.01.037 ↗
20. Analysis of the roles of interphase, waviness and agglomeration of CNT in the electrical conductivity and tensile modulus of polymer/CNT nanocomposites by theoretical approaches10.1016/j.colsurfa.2017.12.001 ↗
21. Interphase in polymer nanocomposites10.1021/jacsau.1c00430 ↗
22. Predicting of electrical conductivity for Polymer-MXene nanocomposites10.1016/j.jmrt.2024.01.014 ↗
23. Estimation of material and interfacial/interphase properties in clay/polymer nanocomposites by yield strength data10.1016/j.clay.2015.07.021 ↗
24. Crucial interfacial shear strength to consider an imperfect interphase in halloysite-nanotube-filled biomedical samples10.1016/j.jmrt.2022.06.098 ↗
25. Accounting the reinforcing efficiency and percolating role of interphase regions in tensile modulus of polymer/CNT nanocomposites10.1016/j.eurpolymj.2017.01.007 ↗
26. Modeling of mechanical behaviors and interphase properties of polymer/nanodiamond composites for biomedical products10.1016/j.jmrt.2022.06.007 ↗
27. Nanodiamond/poly (lactic acid) nanocomposites: effect of nanodiamond on structure and properties of poly (lactic acid)10.1016/j.compositesb.2010.09.003 ↗
28. Berechnung der fließgrenze von mischkristallen auf grund der plastizitätsbedingung für einkristalle10.1002/zamm.19290090104 ↗
29. Ueber die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper10.1002/andp.18892741206 ↗
30. Enhanced mechanical and thermal properties of nanodiamond reinforced low density polyethylene nanocomposites10.1002/app.50929 ↗
31. Three-dimensional models for predicting the modulus and yield strength of polymer blends, foams, and particulate composites10.1002/pc.10295 ↗
32. Influence of aggregate and voids on modulus of elasticity of concrete, cement mortar, and cement paste
33. Tensile modulus of clay-reinforced system supposing the interphase effectiveness for load transferring10.1002/pc.26238 ↗
34. Analysis of interfacial characteristics in polymer nanocomposites via visual particle recognition methodology and micromechanical predictive models10.1016/j.compscitech.2023.110360 ↗
35. Reinforcement of nylon 6, 6/nylon 6, 6 grafted nanodiamond composites by in situ reactive extrusion10.1038/srep37010 ↗
36. Enhanced mechanical properties of chitosan/nanodiamond composites by improving interphase using thermal oxidation of nanodiamond10.1016/j.carbpol.2017.03.048 ↗
37. Evaluation and development of expanded equations based on Takayanagi model for tensile modulus of polymer nanocomposites assuming the formation of percolating networks10.1134/S1029959918040094 ↗
38. Effect of interphase region on the Young's modulus of polymer nanocomposites reinforced with cellulose nanocrystals
39. Predictions of micromechanics models for interfacial/interphase parameters in polymer/metal nanocomposites10.1016/j.ijadhadh.2017.09.015 ↗
40. Efficiency of stress transfer between polymer matrix and nanoplatelets in clay/polymer nanocomposites10.1016/j.clay.2017.03.043 ↗
41. Effects of imperfect interfacial adhesion between polymer and nanoparticles on the tensile modulus of clay/polymer nanocomposites10.1016/j.clay.2016.05.002 ↗
42. Enhancing the mechanical properties of glassy nanocomposites by tuning polymer molecular weight10.1021/acsami.8b13109 ↗
43. Influence of nanoparticle size, loading, and shape on the mechanical properties of polymer nanocomposites10.1063/1.4767517 ↗
44. Polymer-nanoparticle composites: from synthesis to modern applications10.3390/ma3063468 ↗
45. Direct measurement of the wetting behavior of individual carbon nanotubes by polymer melts: the key to carbon nanotube− polymer composites10.1021/nl801209g ↗
46. Effect of ND on thermodynamic performance of SiO 2/epoxy composite insulation materials
47. Filler size effects on reinforcement in elastomer-based nanocomposites: experimental and simulational insights into physical mechanisms10.1021/acs.macromol.6b00844 ↗
48. Effect of matrix modulus, CNT thickness, and interphase volume fraction on mechanical properties of CNT-based polymer composite by finite element method10.14445/22315381/IJETT-V47P225 ↗
49. Recent advances in polymer nanocomposites: unveiling the frontier of shape memory and self-healing properties—a comprehensive review10.3390/molecules29061267 ↗
50. Modeling of blend-based polymer nanocomposites using a knotted approximation of Young's modulus10.1007/s13726-015-0391-7 ↗
51. A core-shell structure for interphase regions surrounding nanoparticles to predict the shear, bulk and Young's polymer moduli of particulate nanocomposites10.1134/S1029959920010099 ↗
52. Strong reinforcement effects of nanodiamond on mechanical and thermal properties of polyamide 6610.1016/j.compscitech.2020.108356 ↗
53. Improved mechanical properties of epoxy reinforced by low content nanodiamond powder10.1016/j.msea.2011.06.053 ↗
54. A review on the effect of processing techniques and functionalization of filler on mechanical properties of polymer nanocomposites
55. Effects of types of fillers and filler loading on the properties of silicone rubber composites10.1177/0731684411416267 ↗
56. Modeling of tensile modulus in polymer/carbon nanotubes (CNT) nanocomposites10.1016/j.synthmet.2015.02.002 ↗
57. Nanodiamond particles/PVDF nanocomposite flexible films: thermal, mechanical and physical properties10.1088/2053-1591/3/8/085028 ↗
58. Fluorescent PLLA-nanodiamond composites for bone tissue engineering10.1016/j.biomaterials.2010.08.090 ↗
59. Strong, tough, transparent and highly heat-resistant acrylic glass based on nanodiamond10.1016/j.polymer.2021.123661 ↗