Multi-scale prediction of effective conductivity for carbon nanofiber polymer composites
Source abstract
Abstract
In this study, a multi-scale method is developed using simple equations and meaningful factors to estimate the effective conductivity of carbon nanofiber (CNF) polymer composites, referred to PCNFs. The interphase around the networked nanofibers is considered in Step I, while the tunneling zone near the CNF/interphase is addressed in Step II. Finally, the effective conductivity of PCNFs, comprising CNFs, interphase, and tunnels, is estimated in Step III. The calculations of the multi-step method are validated by plotting the impacts of all factors and comparing them with experimental data from numerous CNF-filled samples. The minimum ranges of percolating onset ( ϕ p ) and polymer resistivity in the tunnel ( ρ ) maximize the effective conductivity of system, but an insulative sample is observed at ρ > 60 Ω m and ϕ p > 0.015. Additionally, a tunneling distance ( λ ) of 1 nm and a contact diameter ( d ) of 60 nm yield the uppermost effective conductivity of 0.45 S/m, though d < 20 nm results in an insulative PCNF. Consequently, lower percolation onset, smaller polymer tunneling resistivity, narrower tunnels, and larger contact diameters enhance the effective conductivity in PCNFs. Furthermore, the sample with the lowest tunneling resistance demonstrates the highest effective conductivity. This evidence reveals the key role of electron tunneling in PCNFs, validating the multi-scale methodology.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Constructing heterojunction-induced oxygen vacancies of N-doped carbon-encapsulated Sn/SnOx microplates for boosting lithium storage capability
2. Engineering amorphous SnO2 nanoparticles integrated into porous N-doped carbon matrix as high-performance anode for lithium-ion batteries10.1016/j.jcis.2023.02.065 ↗
3. Sn nanoparticles embedded into porous hydrogel-derived pyrolytic carbon as composite anode materials for lithium-ion batteries10.1007/s12598-022-02073-3 ↗
4. A novel In2O3-doped ZnO decorated mesoporous carbon nanocomposite as a sensitive and selective dopamine electrochemical sensor10.1016/j.jmrt.2024.01.106 ↗
5. Recent progressive developments in conductive-fillers based polymer nanocomposites (CFPNC’s) and conducting polymeric nanocomposites (CPNC’s) for multifaceted sensing applications10.1016/j.jmrt.2023.08.300 ↗
6. Graphene-based nanoarchitecture as a potent cushioning/filler in polymer composites and their applications10.1016/j.jmrt.2023.12.108 ↗
7. Expression of normal stress difference and relaxation modulus for ternary nanocomposites containing biodegradable polymers and carbon nanotubes by storage and loss modulus data10.1016/j.compositesb.2018.09.076 ↗
8. Effect of reduced graphene oxide on thermal property of recycled textile polyamide10.1016/j.jmrt.2024.04.119 ↗
9. Atomically dispersed metal–nitrogen–carbon catalysts for fuel cells: advances in catalyst design, electrode performance, and durability improvement10.1039/C9CS00903E ↗
10. Assisted hydrothermal carbonization of agroindustrial byproducts as effective step in the production of activated carbon catalysts for wet peroxide oxidation of micro-pollutants
11. Review of the mechanical properties of carbon nanofiber/polymer composites10.1016/j.compositesa.2011.08.005 ↗
12. A rare-earth oxide@ carbon nanofiber aerogel for self-cleaning, infrared thermal camouflage and high-efficiency microwave absorption10.1016/j.jmrt.2023.05.218 ↗
13. Resistance-type strain sensor based on carbon nanofiber/polypyrrole composite membrane with high sensitivity10.1002/pc.28382 ↗
14. Recent advances in carbon nanofibers and their applications–a review10.1016/j.eurpolymj.2020.109963 ↗
15. Reduced graphene Oxide-Ni@ Multiscale carbon nanofibers with Core-Shell porous structure for microwave absorption performance10.1016/j.compositesa.2023.107621 ↗
16. Electrospinning fabrication of Sb-SnSb/TiO2@ CNFs composite nanofibers as high-performance anodes for lithium-ion batteries10.1016/j.jcis.2022.10.112 ↗
17. A gelatin-treated carbon nanofiber/epoxy nanocomposite with significantly improved multifunctional properties
18. Mechanical and thermal properties of polyethylene/carbon nanofiber composites produced by rotational molding10.1002/pc.25448 ↗
19. Fabrication of flexible porous slide-ring polymer/carbon nanofiber composite elastomer by simultaneous freeze-casting and cross-linking reaction with dimethyl sulfoxide10.1016/j.compscitech.2021.109028 ↗
20. Effect of electrical field treatment on thermal conductivity and mechanical strength of carbon nanofiber/polymer composite sheets with high filler content10.1002/app.51683 ↗
21. Effects of a deficient interface, tunneling size and interphase depth on the percolation inception, percentage of graphene in the nets and conductivity of nanocomposites10.1016/j.diamond.2024.110791 ↗
22. Simulation of the role of agglomerations in the tunneling conductivity of polymer/carbon nanotube piezoresistive strain sensors10.1016/j.compscitech.2023.110242 ↗
23. Predicting of electrical conductivity for Polymer-MXene nanocomposites10.1016/j.jmrt.2024.01.014 ↗
24. Influences of graphene morphology and contact distance between nanosheets on the effective conductivity of polymer nanocomposites10.1016/j.jmrt.2023.06.124 ↗
25. Interphase in polymer-based nanocomposites: Polyoctenamer–single-walled carbon nanotubes10.1016/j.surfin.2023.103011 ↗
26. Influence of nanoparticle size on the mechanical and tribological characteristics of TiO2 reinforced epoxy composites10.1016/j.jmrt.2023.09.002 ↗
27. A modeling methodology to investigate the effect of interfacial adhesion on the yield strength of MMT reinforced nanocomposites10.1016/j.jiec.2018.09.039 ↗
28. Predictions of micromechanics models for interfacial/interphase parameters in polymer/metal nanocomposites10.1016/j.ijadhadh.2017.09.015 ↗
29. Development of Kovacs model for electrical conductivity of carbon nanofiber–polymer systems10.1038/s41598-022-26139-5 ↗
30. Effect of interphase percolation on mechanical behavior of nanoparticle-reinforced polymer nanocomposite with filler agglomeration: a multiscale approach10.1016/j.cplett.2015.06.054 ↗
31. Insights into excluded volume and percolation of soft interphase and conductivity of carbon fibrous composites with core-shell networks10.1016/j.carbon.2020.01.083 ↗
32. Prediction of tensile modulus in polymer nanocomposites containing carbon nanotubes (CNT) above percolation threshold by modification of conventional model10.1016/j.cap.2017.03.010 ↗
33. Evaluation and development of expanded equations based on Takayanagi model for tensile modulus of polymer nanocomposites assuming the formation of percolating networks10.1134/S1029959918040094 ↗
34. A Monte Carlo model with equipotential approximation and tunneling resistance for the electrical conductivity of carbon nanotube polymer composites10.1016/j.carbon.2019.01.098 ↗
35. Analytical formulation for electrical conductivity and percolation threshold of epoxy multiscale nanocomposites reinforced with chopped carbon fibers and wavy carbon nanotubes considering tunneling resistivity10.1016/j.compositesa.2019.105616 ↗
36. Simplification and development of McLachlan model for electrical conductivity of polymer carbon nanotubes nanocomposites assuming the networking of interphase regions10.1016/j.compositesb.2018.08.056 ↗
37. Simulation of electrical conductivity for polymer silver nanowires systems10.1038/s41598-022-25548-w ↗
38. Assessment of electrical conductivity of polymer nanocomposites containing a deficient interphase around graphene nanosheet10.1038/s41598-024-59678-0 ↗
39. A computational exploration of the effect of alignment and aspect ratio on alternating current conductivity in carbon nanofiber–modified epoxy10.1177/1045389X19898252 ↗
40. A multistep methodology for effective conductivity of carbon nanotubes reinforced nanocomposites10.1016/j.jallcom.2019.04.070 ↗
41. A new analytical model for predicting the electrical conductivity of carbon nanotube nanocomposites10.1016/j.coco.2020.100577 ↗
42. Modeling the interphase region in carbon nanotube-reinforced polymer nanocomposites10.1002/pc.24950 ↗
43. Micromechanics modeling of bi-axial stretching effects on the electrical conductivity of CNT-polymer composites10.1142/S1758825115400050 ↗
44. Effects of CNT size, network fraction, and interphase thickness on the tunneling distance between neighboring carbon nanotubes (CNTs) in nanocomposites10.1016/j.jiec.2019.11.039 ↗
45. Significances of interphase conductivity and tunneling resistance on the conductivity of carbon nanotubes nanocomposites10.1002/pc.25405 ↗
46. A review of the fabrication and properties of vapor-grown carbon nanofiber/polymer composites10.1016/j.compscitech.2006.06.015 ↗
47. Electrical conductivity of PAN-based carbon nanofibers prepared by electrospinning method
48. Carbon nanofibers prepared via electrospinning10.1002/adma.201104940 ↗
49. Electrically conductive polymer nanocomposites of polymethylmethacrylate and carbon nanofibers prepared by chaotic mixing10.1016/j.compositesa.2006.06.017 ↗
50. Effects of crystallization on dispersion of carbon nanofibers and electrical properties of polymer nanocomposites10.1002/pen.20949 ↗
51. Highly dispersed and electrically conductive polycarbonate/oxidized carbon nanofiber composites for electrostatic dissipation applications10.1016/j.carbon.2010.06.050 ↗
52. The role of carbon nanofiber defects on the electrical and mechanical properties of CNF-based resins10.1088/0957-4484/24/30/305704 ↗
53. Percolation mechanism and effective conductivity of mechanically deformed 3-dimensional composite networks: computational modeling and experimental verification10.1016/j.compositesb.2020.108552 ↗
54. Prediction of piezoresistive sensitivity and percolation probability of synergetic CNT-GNP conductive network composite10.1016/j.sna.2022.113414 ↗