Development and characterization of polyester/ramie fiber hybrid composites reinforced with crystalline nanocellulose extracted from durian peel waste
Source abstract
Abstract
Using natural fibers and natural fillers as composite reinforcing materials has received great attention due to its potential to improve mechanical, thermal, biodegradable, and tribological properties while promoting sustainability. The present paper investigated unidirectional ramie fiber-reinforced polyester composites treated with alkali and oxalic acid and incorporating cellulose nanocrystals (CNCs) to assess their performance. Hybrid composites were created by adding 0.5, 0.75, and 1 wt% CNCs to polyester/ramie composites using the vacuum infusion technique. Mechanical and thermal tests and morphological examination were carried out to assess the influence of CNCs content on the composite properties. The results demonstrated that the presence of CNCs notably improved the mechanical performances of the polyester/ramie fiber composites. The optimal CNCs loading was attained at 0.75 wt% where the tensile strength, tensile modulus, flexural strength, flexural modulus, interlaminar shear strength, and impact strength of the polyester/ramie fiber composites were enhanced by 27.23, 33.12, 39.41, 84.56, 31.91, and 49.53%, respectively. This was confirmed by FE-SEM observations of hybrid composites, which showed good interfacial adhesion between ramie fiber and polyester/CNCs matrix. The addition of CNCs was found not to affect the thermal characteristics of the hybrid composites. Overall, polyester/ramie fiber hybrid composites containing CNCs provided great potential for structural applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Advanced Cellulose Research Studies · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Synergy of rice-husk filler on physico-mechanical and tribological properties of hybrid Bauhinia-vahlii/sisal fiber reinforced epoxy composites10.1016/j.jmrt.2018.12.021 ↗
2. A comprehensive review of natural fibers and their composites: an eco-friendly alternative to conventional materials10.1016/j.rineng.2023.101271 ↗
3. Damage formations of ramie fiber composites multilayer armour system under highvelocity impacts10.15587/1729-4061.2023.273788 ↗
4. Ramie fiber woven composite: the effect of feedrate variation on the tensile strength of the open hole in the drilling10.4028/p-67358b ↗
5. Microwave-assisted alkali treatment of sisal fiber for fabricating composite as non-structural building materials10.1016/j.conbuildmat.2023.134651 ↗
6. Alkali treated coir/pineapple leaf fibres reinforced pla hybrid composites: evaluation of mechanical, morphological, thermal and physical properties10.3144/expresspolymlett.2020.59 ↗
7. Durability and mechanical characteristics of unidirectional jute/banana and synthetic fiber reinforcement epoxy composite10.1016/j.hybadv.2024.100232 ↗
8. Long coir and glass fiber reinforced polypropylene hybrid composites prepared via wet-laid technique10.1016/j.jcomc.2024.100445 ↗
9. Experimental investigation on mechanical properties of Kenaf fibre reinforced epoxy composites with annona squamosa powder10.1016/j.matpr.2023.06.247 ↗
10. A review on physico-mechanical properties of bast fibre reinforced polymer composites10.1016/j.jobe.2016.12.003 ↗
11. Mechanical properties and thermal characteristics of three nano-filler/silk fiber reinforced hybrid composites: a comparative study using a ductile epoxy resin matrix10.1016/j.polymertesting.2023.108319 ↗
12. Influence of cellulosic and non-cellulosic particle fillers on mechanical, dynamic mechanical, and thermogravimetric properties of waste cotton fibre reinforced green composites10.1016/j.compositesb.2020.108595 ↗
13. Influence of Tamarindus indica seed nano-powder on properties of Luffa cylindrica (L.) fruit waste fiber reinforced polymer composites10.1002/pc.26957 ↗
14. Enhancement micro filler spent coffee grounds in catalyst - chemically modified bast fibers reinforced biodegradable materials
15. Dynamic mechanical, tensile fatigue and water absorption behaviour of polyester composites comprises of Amaranthus dubius stem natural fiber and its root waste crystalline cellulose
16. Influence of natural fillers on physico-mechanical properties of luffa cylindrica/polyester composites10.1016/j.matpr.2018.04.107 ↗
17. Effect of oil palm nano filler on mechanical and morphological properties of kenaf reinforced epoxy composites10.1016/j.conbuildmat.2016.06.131 ↗
18. Development of sustainable polyester biocomposites using Lansium parasiticum fruit shell powder and hemp chopped fibre: mechanical, wear, hydrophobic and flammability behaviour10.1007/s13399-023-05199-1 ↗
19. Experimental investigations on mechanical and water absorption properties of epoxy resin-banana fiber-tamarind seed particles hybrid biocomposites10.1016/j.matpr.2022.08.436 ↗
20. Effect of cellulose nano fibers and nano clays on the mechanical, morphological, thermal and dynamic mechanical performance of kenaf/epoxy composites10.1016/j.carbpol.2020.116248 ↗
21. Mechanical, morphological, and thermal characteristics of epoxy/glass fiber/cellulose nanofiber hybrid composites10.1016/j.polymertesting.2022.107560 ↗
22. Oxidized cellulose nanocrystals from durian peel waste by ammonium persulfate oxidation10.1021/acsomega.3c03117 ↗
23. Production of cellulose nanofibrils: a review of recent advances10.1016/j.indcrop.2016.02.016 ↗
24. Development, processing and applications of bio-sourced cellulose nanocrystal composites10.1016/j.progpolymsci.2020.101221 ↗
25. Critical insights into the reinforcement potential of cellulose nanocrystals in polymer nanocomposites10.1016/j.cossms.2019.06.005 ↗
26. Cellulose nanocrystal based composites: a review10.1016/j.jcomc.2021.100164 ↗
27. Construction of self-assembled nano cellulose crystals/chitosan nanobubbles composite hydrogel with improved gallic acid release property10.1016/j.foodchem.2023.137948 ↗
28. Nanocrystalline cellulose as a reinforcing agent for poly (vinyl alcohol)/gellan-gum-based composite film for moxifloxacin ocular delivery10.1016/j.ijbiomac.2024.132302 ↗
29. Fabrication and tensile properties of ABS/cellulose nanocrystal nanocomposite filaments for 3D printing10.1063/5.0066895 ↗
30. Herianto. Preparation and properties of cellulose nanocrystals-reinforced Poly (lactic acid) composite filaments for 3D printing applications10.1016/j.rineng.2022.100842 ↗
31. Influences of sodium hydroxide and oxalic acid treatments on physical, mechanical, thermal properties, and morphology of ramie fibers10.1016/j.jmrt.2024.05.233 ↗
32. Venkateshwaran · 2019 · 31
33. Effect of alumina contents on the physicomechanical properties of alumina (Al2 o3) reinforced polyester composites10.1155/2019/5173537 ↗
34. Mechanical, fatigue and DMA behaviour of high content cellulosic corn husk fibre and orange peel biochar epoxy biocomposite: a greener material for cleaner production10.1016/j.jclepro.2022.133931 ↗
35. Nanotechnology-enhanced fiber-reinforced polymer composites: recent advancements on processing techniques and applications10.1016/j.heliyon.2024.e24692 ↗
36. Influence of fly ash filler on the mechanical properties and water absorption behaviour of epoxy polymer composites reinforced with pineapple leaf fibre for biomedical applications10.1039/D4RA00529E ↗
37. PLA composite with OPEFB
38. Enhancement of tensile strength and fracture toughness characteristics of banana fibre reinforced epoxy composites with nano MgO fillers
39. Mechanical and water absorption characterization of mango seed shell/epoxy composite for low load carrying structures10.1155/2023/9976409 ↗
40. Ultrahigh performance of nanoengineered graphene-based natural jute fiber composites10.1021/acsami.9b04696 ↗
41. Magnesium hydroxide reinforced kenaf fibers/epoxy hybrid composites: mechanical and thermomechanical properties10.1016/j.conbuildmat.2018.12.182 ↗
42. Investigation of nano SiO2 filler loading on mechanical and flammability properties of jute-based hybrid polypropylene composites10.1007/s12633-023-02578-1 ↗
43. Kenaf fiber and hemp fiber multi-walled carbon nanotube filler-reinforced epoxy-based hybrid composites for biomedical applications: morphological and mechanical characterization10.3390/jcs7080324 ↗
44. Nontraditional natural filler-based biocomposites for sustainable structures10.1155/2023/8838766 ↗
45. Thermal and dynamic performance of kenaf/washingtonia fibre-based hybrid composites10.1016/j.jmrt.2023.06.035 ↗
46. Development and characterization of thermoset nanocomposites reinforced with cotton fibres recovered from textile waste10.1177/1528083720913535 ↗
47. Influence of powdered chick eggshell (PECS) on mechanical and wear properties of kenaf fiber (KF) reinforced composites10.1016/j.matpr.2023.03.009 ↗
48. Influence of cellulose nanocrystal/sisal fiber on the mechanical, thermal, and morphological performance of polypropylene hybrid composites10.1007/s00289-020-03178-4 ↗
49. Effect of incorporation natural fillers with Sterculia foetida fiber on physical, mechanical, and thermal characterization of epoxy polymer composites10.1007/s00170-023-12907-8 ↗
50. Influence of date palm fibre and graphite filler on mechanical and wear characteristics of epoxy composites10.1016/j.matdes.2014.02.066 ↗
51. The effect of nanocellulose and silica filler on the mechanical properties of natural fiber polymer matrix composites10.1016/j.rineng.2024.102898 ↗
52. Influence of nano-silica on mechanical properties of Indian almond fiber reinforced hybrid epoxy composites10.1080/15440478.2022.2048942 ↗
53. Properties of organic and inorganic filler hybridization on Timoho Fiber-reinforced polyester polymer composites10.1002/pc.26443 ↗
54. Eggshell bio-filler integration in jute/banana fiber-reinforced epoxy hybrid composites: fabrication and characterization10.1002/app.56155 ↗
55. Interfacial bonding mechanisms of natural fibre-matrix composites: an overview10.15376/biores.17.4.Mohammed ↗
56. Reinforcing properties of bacterial polyester with different cellulose nanocrystals via modulating hydrogen bonds10.1016/j.compscitech.2016.10.004 ↗
57. Formation of a carbon fiber/polyhedral oligomeric silsesquioxane/carbon nanotube hybrid reinforcement and its effect on the interfacial properties of carbon fiber/epoxy composites10.1016/j.carbon.2011.02.026 ↗
58. Inter-fiber stresses in composites with carbon nanotube grafted and coated fibers10.1016/j.compscitech.2015.04.013 ↗
59. Mechanical, dielectric, and hydrophobicity behavior of coconut shell biochar toughened Caryota urens natural fiber reinforced epoxy composite10.1002/pc.26393 ↗
60. Fabrication and characterization of echinoidea spike particles and kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio composite10.1016/j.compositesa.2019.01.008 ↗
61. Hybrid effect of neem seed and groundnut shell bio-fillers on the mechanical, water absorption and thermal properties of jute fiber reinforced epoxy composites10.1515/ijmr-2023-0301 ↗
62. Effect of heat treated HNT on physico-mechanical properties of epoxy nanocomposites10.1016/j.coco.2019.02.005 ↗
63. Enhancement of mechanical properties of epoxy/halloysite nanotube (HNT) nanocomposites
64. Grape stalk cellulose toughened plain weaved bamboo fiber-reinforced epoxy composite: load bearing and time-dependent behavior10.1007/s13399-022-03702-8 ↗
65. Development of silane-treated corn husk fiber and agro-waste biofiller-reinforced epoxy composite: effects on wear, mechanical, thermal, and water absorption properties10.1007/s13399-024-05837-2 ↗
66. Integrating tough Antheraea pernyi silk and strong carbon fibres for impact-critical structural composites10.1038/s41467-019-11520-2 ↗
67. A nanostructured cellulose-based interphase layer to enhance the mechanical performance of glass fibre-reinforced polymer composites10.1016/j.compositesa.2021.106475 ↗
68. Nanofibril reinforced unsaturated polyester nanocomposites: morphology, mechanical and barrier properties, viscoelastic behavior and polymer chain confinement10.1016/j.indcrop.2014.03.005 ↗
69. Enhanced interlaminar shear strength of ramie fiber/polypropylene composites by optimal combination of graphene oxide size and content10.1016/j.compositesb.2019.03.080 ↗
70. Novel glass fibre reinforced hierarchical composites with improved interfacial, mechanical and dynamic mechanical properties developed using cellulose microcrystals10.1016/j.matdes.2019.108448 ↗
71. Flexural and Short beam shear strength analysis of symmetrical GFRP composites reinforced with MWCNTs having notches10.1088/1757-899X/377/1/012147 ↗
72. The reinforcing effect of oriented graphene on the interlaminar shear strength of carbon fabric/epoxy composites10.1016/j.matdes.2019.108257 ↗
73. An experimental study on the effect of nano-clay addition on mechanical and water absorption behaviour of jute fibre reinforced epoxy composites10.1177/1528083718792915 ↗
74. Impact strength of polymer-clay nanocomposites10.1039/b902073j ↗
75. Experimental impact on mechanical characteristics of banana fiber reinforced, groundnut shell powder filled epoxy resin matrix bio composites10.35940/ijitee.E2496.039520 ↗
76. Effects of microcrystalline cellulose on the mechanical properties of low-density polyethylene composites10.1177/0892705717753056 ↗
77. Determining the mechanical properties of microcrystalline cellulose (MCC)-Filled PET-PTT blend composites
78. A green approach of improving interface and performance of plant fibre composites using microcrystalline cellulose10.1016/j.carbpol.2018.05.074 ↗
79. Thermal properties of treated sugar palm yarn/glass fiber reinforced unsaturated polyester hybrid composites10.1016/j.jmrt.2019.11.086 ↗
80. Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil10.1016/j.indcrop.2009.07.013 ↗
81. Influence of fibre treatment and glass fibre hybridisation on thermal degradation and surface energy characteristics of hemp/unsaturated polyester composites10.1016/j.compositesb.2012.04.036 ↗
82. Cellulose nanomaterials review: structure{,} properties and nanocomposites10.1039/c0cs00108b ↗
83. Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide10.1021/am201757v ↗
84. TEMPO-oxidized cellulose nanofibers as interfacial strengthener in continuous-fiber reinforced polymer composites10.1016/j.matdes.2017.08.004 ↗
85. Interactions between the glass fiber coating and oxidized carbon nanotubes10.1016/j.apsusc.2015.01.025 ↗