journal article·2025-01Open access

Texture evolution and anisotropy of TA18 titanium alloy strip under rolling and heat treatment conditions

Bobo Li, Jiangkun Fan, Wenyuan Zhang, Jiaxing Zhao, Ding Zhao, Huifa Tao, Xiaobo Hao, Fei Wang, Peng Jiang, Hongchao Kou, Jinshan Li

Abstract

Texture and anisotropy control of rolled strip have always been a technical problem in titanium alloy industry, especially for near-alpha titanium alloys. In order to solve the above problems, we innovatively propose a process method for efficiently preparing weakly anisotropic alloy strips. In this paper, the texture evolution and anisotropy of TA18 titanium alloy strip under various rolling and heat treatment conditions were systematically studied by EBSD and other technical means. The results have showed that the hot-rolled TA18 titanium alloy has a distinct band microstructure along the RD. The obvious tensile properties anisotropy of hot-rolled TA18 titanium alloy is mainly due to the non-uniform microstructure formed and strong T-type micro-texture. The hot-rolled TA18 titanium alloy after 700 °C/3h heat treatment occurred complete recrystallization process, which formed the fine and uniform equiaxed grains. Texture components distribution of the titanium alloy changed from typical bimodal texture to the tendency of <0001>//normal direction (ND) base plane texture. The hot-rolled TA18 titanium alloy after heat treatment at 700 °C/3h, followed by rolling to 4.8 mm at room temperature and annealing at 730 °C/1h, could effectively reduce the anisotropy of titanium alloys. Finally, the formation of anisotropy of yield strength was considered as the different slip activation behaviors due to the influence of micro-texture orientation. This study innovatively proposes an efficient method for fabricating alloy strips with reduced anisotropy forTA18 titanium alloy strips.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Deformation anisotropy and associated mechanisms in rolling textured high purity titanium10.1016/j.jallcom.2015.08.075 ↗
2. Size effect on the high strain rate micro/mesotensile behaviors of pure titanium foil10.1016/j.jmrt.2021.02.022 ↗
3. Strengthening strain-transformable β Ti-alloy via multi-phase nanostructuration10.1016/j.jallcom.2019.05.352 ↗
4. Designing ultra-strong and ductile hierarchical titanium alloys via interstitial solute-mediated multi-morphologic α-nanoprecipitates10.1016/j.actamat.2023.119082 ↗
5. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process10.1016/j.msea.2022.143260 ↗
6. Additive manufacturing of ultrafine-grained high-strength titanium alloys10.1038/s41586-019-1783-1 ↗
7. Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4 V10.1016/j.actamat.2018.05.044 ↗
8. Effects of Ti content on the microstructure, mechanical properties andcorrosion behavior of TixZrNb alloys10.1016/j.jmrt.2022.05.140 ↗
9. Fracture mechanisms in flat and cylindrical tensile specimens of TRIP-TWIP b-metastable Ti-12Mo alloy10.1016/j.actamat.2021.117294 ↗
10. Superior strength-ductility synergy by microstructural heterogeneities in pure titanium10.1016/j.msea.2023.145513 ↗
11. Enhanced strength in pure Ti via design of alternating coarse-and fine-grain layers10.1016/j.actamat.2021.116627 ↗
12. Tuning the strength and ductility balance of a TRIP titanium alloy10.1016/j.scriptamat.2020.113641 ↗
13. Oxygen effects on crystal plasticity of titanium: a multiscale calibration and validation framework10.1016/j.actamat.2019.06.040 ↗
14. Grain refinement in titanium prevents low temperature oxygen embrittlement10.1038/s41467-023-36030-0 ↗
15. Research on the anisotropy of plastic behavior and deformation mechanism of textured pure titanium10.1016/j.matchar.2022.112483 ↗
16. Evolution of microstructure, macrotexture and mechanical properties of high strength biomedical TA4 pure titanium during multi-pass ECAP10.1016/j.jmrt.2023.12.273 ↗
17. Hierarchically ordered coherent interfaces-driven ultrahigh specific-strength and toughness in a nano-martensite titanium alloy10.1016/j.actamat.2023.119540 ↗
18. Creep anisotropy characteristics and microstructural crystallography of marine engineering titanium alloy Ti6321 plate at room temperature10.1016/j.msea.2022.143728 ↗
19. Twinning and sequential kinking in lamellar Ti-6Al-4V alloy10.1016/j.actamat.2019.10.010 ↗
20. Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition10.1016/j.actamat.2014.11.028 ↗
21. Anisotropic tensile and ratcheting behavior of commercially pure titanium processed via cross rolling and annealing10.1016/j.ijfatigue.2018.10.024 ↗
22. Anisotropy of microstructure and tensile properties of Ti–48Al–2Cr–2Nb fabricated by electron beam melting10.1016/j.jallcom.2020.154684 ↗
23. The anisotropy of laser melting deposition additive manufacturing Ti–6.5 Al–3.5 Mo–1.5 Zr–0.3 Si titanium alloy10.1016/j.matdes.2014.11.001 ↗
24. Mechanism of the anisotropy of yield ratio in TA5 titanium alloy plates10.1016/j.msea.2015.04.083 ↗
25. Orientation dependent behavior of tensile-creep deformation of hot rolled Ti65 titanium alloy sheet10.1016/j.jmst.2020.10.021 ↗
26. Creep anisotropy characteristics and microstructural crystallography of marine engineering titanium alloy Ti6321 plate at room temperature
27. Strategies for improving the sustainability of structural metals10.1038/s41586-019-1702-5 ↗
28. Mechanisms of anisotropy of mechanical properties of α-titanium in tension conditions10.1016/j.msea.2013.12.061 ↗
29. Rolling texture and its effect on tensile property of a near-α titanium alloy Ti60 plate10.1016/j.jmst.2018.10.032 ↗
30. Effects of induced shear deformation on microstructure and texture evolution in CP-Ti rolled sheets10.1016/j.msea.2014.09.004 ↗
31. Effect of rolling-texture intensity on fretting damage and subsurface deformation behavior in a high-strength titanium alloy10.1016/j.jmst.2024.01.060 ↗
32. The mechanism for annealing-induced ductile to brittle transition in a high-temperature titanium alloy and its mitigation10.1016/j.msea.2024.146370 ↗
33. Effect of Zr addition on the microstructure and mechanical properties of hot-rolled TiZrAlSn alloys
34. Recent advances in silicon containing high temperature titanium alloys10.1016/j.jmrt.2021.08.117 ↗
35. Research on the anisotropic mechanism of plastic behavior during tensile process of textured pure titanium10.1016/j.msea.2024.146153 ↗