journal article·2021-11Open access

Effect of Zn additions on the microstructure and mechanical properties of Sn-Babbitt alloys fabricated by arc deposition

Jingyu Zhao, Kai Sun, Gang Liang, Congcong Xu, Jiahui Zhao, Feng Xue, Jian Zhou

Abstract

A deposited layer of Sn-based Babbitt alloys was fabricated on the surface of the steel substrate via the arc deposition technique. The effect of the composition of Zn on the microstructure and mechanical properties has been systematically studied. The morphology of Babbitt alloys and the interfacial microstructure of the interface between the cladding layer and substrate have been investigated. The experimental results revealed that SnSb phases and Cu6Sn5 phases become more uniformly dispersed in the Sn-matrix as Zn composition increased, which resulting in the improvement of hardness and tensile strength. The enhanced performance can be attributed to precipitation strengthening of the newly formed substitutional solid solution Cu6Zn0.5Sn4.5. The bonding strength of Babbitt and steel has been tested according to the standard destructive testing method of sliding bearing. The bonding strength increased and decreased with the increment of Zn, since excessive Zn led the fracture site to shift from the SnSb phase to the segregated Cu6Sn4.5Zn 0.5 at the interface near IMC layers.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. A study on the tribological behavior of surface texturing on Babbitt alloy under mixed or starved lubrication10.1007/s11249-014-0410-4 ↗
2. Evaluation of microstructure, mechanical and tribological properties of a Babbitt alloy deposited by arc and flame spray processes10.1016/j.triboint.2018.10.027 ↗
3. Tribological performance of tin-based overlay plated engine bearing materials10.1016/j.triboint.2015.06.014 ↗
4. Copper effects in mechanical properties of rapidly solidified Sn–Pb–Sb Babbitt bearing alloys10.1016/j.msea.2011.09.092 ↗
5. Microstructure and tribological behavior of tungsten inert gas welding arc brazing tin-based babbit10.1007/s12598-017-0984-8 ↗
6. Structural design and wear properties of TIG arc brazing tin-based babbit to mild steel10.1515/htmp-2016-0240 ↗
7. A study on tribological behaviour of tin-based bearing material in dry sliding10.1016/j.matdes.2005.05.016 ↗
8. Friction and wear reduction of eccentric journal bearing made of Sn-based Babbitt for ore cone crusher10.3390/ma9110950 ↗
9. Embeddability behaviour of tin-based bearing material in dry sliding10.1016/j.matdes.2006.06.020 ↗
10. Tribological properties of Tin-based Babbitt bearing alloy with polyurethane coating under dry and starved lubrication conditions10.1016/j.triboint.2015.03.032 ↗
11. Effects of SiC additions on the microstructure, compressive strength and wear resistance of Sn-Sb-Cu bearing alloy formed via powder metallurgy10.1016/j.jmrt.2020.08.102 ↗
12. Improved microstructure and bonding strength via MIG arc brazing in Sn-based Babbitt layer for bearing fabrication10.1088/2053-1591/ab4951 ↗
13. Failure analysis of journal bearing used in turboset of a power plant10.1016/j.matdes.2013.06.027 ↗
14. Microstructural and tribological characteristics of Sn-Sb-Cu-based composite coatings deposited by cold spraying10.1007/s11666-020-01054-1 ↗
15. Microstructural control by spray forming and wear characteristics of a Babbit alloy10.1023/A:1018667121357 ↗
16. Microstructure and bonding strength of tin-based Babbitt alloy on ASTM 1045 steel by MIG arc brazing10.1080/01694243.2018.1464239 ↗
17. Effects of Ag micro-addition on structure and mechanical properties of Sn-11Sb-6Cu Babbitt10.1016/j.msea.2018.03.034 ↗
18. Effect of Zn additions on the mechanical properties of Cu6Sn5-based IMCs: theoretical and experimental investigations10.1007/s11664-015-3863-9 ↗
19. The superstructure of domain-twinned η'-Cu6Sn510.1107/S0108768194004052 ↗
20. Interfacial reactions between lead-free solders and common base materials10.1016/j.mser.2005.03.001 ↗
21. Solidification processing of high temperature intermetallic eutectic-based alloys10.1016/0921-5093(95)03299-1 ↗
22. Phase stability and thermal expansion behavior of Cu6Sn5 intermetallics doped with Zn, Au and in10.1016/j.intermet.2013.07.012 ↗