journal article·2022-05Open access

Correlation between crystallographic texture and electrochemical behavior of nano/ultrafine-grained AA2024 alloy processed by accumulative roll bonding process

M. Naseri, E. Borhani, O. Imantalab, H.W. Jang, M. Shokouhimehr, A. Fattah-alhosseini

Abstract

This study provides an insight into the correlation between crystallographic texture and electrochemical behavior of nano/ultrafine-grained AA2024 alloy. To achieve this objective, the following AA2024 alloys were processed by accumulative roll bonding (ARB): (i) Nano/ultrafine-grained AA2024 alloy with virtually the same grain size and the texture components of S {123}⟨634⟩, Cube {001}⟨100⟩, Copper {112}⟨111⟩, and Brass {011}⟨211⟩, and (ii) Bimodal-grained structure AA2024 alloy consisting of coarse and ultrafine elongated grains and the texture components of S {123}⟨634⟩ and Brass {011}⟨211⟩. The results indicated that the grain refinement increases the corrosion current density and decreases the passive film resistance of AA2024 alloy in quiescent phosphate buffer solution (pH = 9). Overall, electrochemical studies revealed that the uniform distribution of grain size and development of Cube {001}⟨100⟩ and Copper {112}⟨111⟩ texture components provide the most advantageous electrochemical properties. Hence, it was suggested that nano/ultrafine-grained structure was preferred compared to bimodal grain structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Structure and strength after large strain deformation10.1016/j.msea.2004.02.078 ↗
2. Deformed metals – structure, recrystallisation and strength10.1179/1743284711Y.0000000046 ↗
3. Strengthening mechanisms in nanostructured aluminum10.1016/j.msea.2006.10.173 ↗
4. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
5. Microstructure quantification and correlation with flow stress of ultrafine grained commercially pure Al fabricated by equal channel angular pressing (ECAP)10.1016/j.matchar.2007.11.006 ↗
6. Equal-channel angular pressing of commercial aluminum alloys: grain refinement, thermal stability and tensile properties10.1007/s11661-000-0011-8 ↗
7. Wear behavior of nanostructured Al/Al2O3 composite fabricated via accumulative roll bonding (ARB) process10.1016/j.matdes.2014.03.027 ↗
8. A new strategy to simultaneous increase in the strength and ductility of AA2024 alloy via accumulative roll bonding (ARB)10.1016/j.msea.2016.01.020 ↗
9. Effect of strain path on microstructure, deformation texture and mechanical properties of nano/ultrafine grained AA1050 processed by accumulative roll bonding (ARB)10.1016/j.msea.2016.07.031 ↗
10. Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation10.1016/S0921-5093(00)01660-9 ↗
11. Effect of grain refinement on mechanical and electrochemical properties of severely deformed pure copper through equal channel angular pressing10.1088/2053-1591/aacf36 ↗
12. Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process10.1016/S1359-6462(98)00302-9 ↗
13. Manufacturing of high-strength aluminum/alumina composite by accumulative roll bonding10.1016/j.msea.2010.03.070 ↗
14. An alternative method for manufacturing Al/B4C/SiC hybrid composite strips by cross accumulative roll bonding (CARB) process10.1016/j.ceramint.2015.07.137 ↗
15. Fabrication and characterization of hybrid composite strips with homogeneously dispersed ceramic particles by severe plastic deformation10.1016/j.ceramint.2014.11.079 ↗
16. Fabrication of Al–2 vol% Al2O3/SiC hybrid composite via accumulative roll bonding (ARB): an investigation of the microstructure and mechanical properties10.1016/j.msea.2014.04.013 ↗
17. Microstructure and mechanical properties of the Mg/Al multilayer fabricated by accumulative roll bonding (ARB) at ambient temperature10.1016/j.msea.2012.02.083 ↗
18. Microstructure and mechanical properties of Ni/Ti/Al/Cu composite produced by accumulative roll bonding (ARB) at room temperature10.1016/j.jmrt.2020.03.077 ↗
19. An analytical approach for necking and fracture of hard layer during accumulative roll bonding (ARB) of metallic multilayer10.1016/j.matdes.2015.10.088 ↗
20. Electrochemical corrosion behaviour of microcrystalline aluminium in acidic solutions10.1016/j.corsci.2006.11.006 ↗
21. Corrosion of ultrafine grained materials by severe plastic deformation, an overview10.2320/matertrans.M2015452 ↗
22. Effect of particles content on microstructure, mechanical properties, and electrochemical behavior of aluminum-based hybrid composite processed by accumulative roll bonding process10.1007/s11661-016-3933-5 ↗
23. Corrosion and tensile behaviors of ultra-fine grained Al–Mn alloy produced by accumulative roll bonding10.1016/j.msea.2006.11.063 ↗
24. Effect of the number of ECAP pass time on the electrochemical properties of 1050 Al alloys10.1016/j.msea.2003.08.056 ↗
25. On the chloride-induced pitting of ultra fine grains 5052 aluminum alloy produced by accumulative roll bonding process10.1016/j.jallcom.2011.01.066 ↗
26. Corrosion behavior of ultra-fine grained 1050 aluminum alloy fabricated by ARB process in a buffer borate solution10.1007/s11665-015-1627-6 ↗
27. Microstructural evolution and mechanical properties of ultrafine grained AA2024 processed by accumulative roll bonding10.1007/s00170-017-0547-z ↗
28. Effect of grain refinement on the passive and electrochemical behavior of 2024 Al alloy10.1016/j.jallcom.2017.03.031 ↗
29. Passive behavior of ultra-fine-grained 1050 aluminum alloy produced by accumulative roll bonding in a borate buffer solution10.1007/s40195-015-0316-7 ↗
30. Evolution of grain-boundary microstructure and texture in interstitial-free steel processed by equal-channel angular extrusion10.1007/s11661-009-9939-5 ↗
31. Texture evolution in Al–0.2 mass% Sc alloy during ARB process and subsequent annealing10.2320/matertrans.MA201223 ↗
32. Study of texture, anisotropy and formability of cartridge brass sheets10.1016/j.jallcom.2013.11.091 ↗
33. Effect of stacking fault energy on deformation texture development of nanostructured materials produced by the ARB process10.1016/j.msea.2014.01.048 ↗
34. Shear texture gradient in AA6061 aluminum alloy processed by accumulative roll bonding with high roll roughness10.1016/j.jallcom.2014.01.125 ↗
35. Role of shear strain in ultragrain refinement by accumulative roll-bonding (ARB) process10.1016/S1359-6462(01)01239-8 ↗
36. Microstructure homogeneity in various metallic materials heavily deformed by accumulative roll-bonding10.1016/j.msea.2006.02.028 ↗
37. Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process10.1016/S1359-6454(98)00365-6 ↗
38. Textural evolution of nanostructured AA5083 produced by ARB10.1016/j.msea.2012.06.098 ↗
39. Nano/ultrafine grained AA2024 alloy processed by accumulative roll bonding: a study of microstructure, deformation texture and mechanical properties10.1016/j.jallcom.2017.04.117 ↗
40. On the microstructure, texture and mechanical properties through heat treatment in Al–CuO nanocomposite fabricated by Accumulative Roll Bonding (ARB)10.1016/j.msea.2021.142080 ↗
41. Comparison of microparticles and nanoparticles effects on deformation texture of steel-based composite and nanocomposite fabricated by the ARB process10.1016/j.msea.2014.04.007 ↗
42. Corrosion behavior of severely deformed pure and single-phase materials10.2320/matertrans.MF201935 ↗
43. Effect of accumulative roll bonding process on the electrochemical behavior of pure copper10.1016/j.jallcom.2015.01.208 ↗
44. Microstructure and corrosion characterization of the nugget region in dissimilar friction-stir-welded AA5083 and AA105010.1007/s10853-018-2820-4 ↗
45. Comparison of electrochemical behavior between coarse-grained and fine-grained AISI 430 ferritic stainless steel by Mott–Schottky analysis and EIS measurements10.1016/j.jallcom.2015.03.142 ↗
46. Effect of anodic potential on the electrochemical response of passive layers formed on the surface of coarse- and fine-grained pure nickel in borate buffer solutions10.1016/j.corsci.2017.11.016 ↗
47. Simultaneous investigation of the effect of advanced thermomechanical treatment and repetitive cyclic voltammetry on the electrochemical behavior of AISI 430 ferritic stainless steel10.1007/s11665-017-2509-x ↗
48. Corrosion behaviors at different temperature based on the ultrafine-grained structure of Al-Fe alloy10.1016/j.matlet.2021.131508 ↗
49. The passive film characteristics of cold deformed pure copper10.1007/s11665-016-2352-5 ↗
50. Influence of bimodal grain size distribution on the corrosion behavior of friction stir processed biodegradable AZ31 magnesium alloy10.1016/j.jma.2015.12.004 ↗