Energy absorption capability of graded and non-graded sheet-based gyroid structures fabricated by microcast processing
Source abstract
Abstract
This review analyses the design, manufacture and mechanical behaviour of sheet-based gyroid structures with different gradients, made of the alloy AlSi7Mg0.6. Contrary to most contributions, additive manufacturing was not used for the production of the metallic lattices. The lattices were manufactured by microcast processing, which represents an alternative manufacturing option for complex structures. Five different gyroid structures of AlSi7Mg0.6, with a porosity between 40% and 80% and different gradients, are produced and analysed. The special feature here is that, in addition to constant and linear gradients, a non-linear gradient is also taken into account. With the introduction of a non-linear gradient, a hardly considered structure is introduced. By introducing new gradients, the structures can be better adapted to their environment. The main focus of the mechanical behaviour analysis was on the possible energy absorption capacity. For this purpose, compression tests were performed. The plateau of the resulting stress–strain diagram of structures with constant porosities of 80% and 60% characterises an ideal course for energy absorption. However, graded porosity structures with porosities ranging from 80% to 40% have a higher energy absorption capacity than the structures with a constant porosity of 80%. The results show a new possibility that a targeted adjustment of the energy absorption potential is possible through future topology optimisation, which would be attractive in industries with crash safety areas.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Architected cellular materials10.1146/annurev-matsci-070115-031624 ↗
2. Reversible energy absorbing meta-sandwiches by FDM 4D printing10.1016/j.ijmecsci.2020.105451 ↗
3. Absence of circular polarisation in reflections of butterfly wing scales with chiral gyroid structure10.1016/j.matpr.2014.09.023 ↗
4. Yan · Design of TPMS structures · 2021 · 27
5. Design, mechanical properties and energy absorption capability of graded-thickness triply periodic minimal surface structures fabricated by selective laser melting10.1016/j.ijmecsci.2021.106586 ↗
6. Compressive deformation behavior and energy absorption characteristic of additively manufactured sheet CoCrMo triply periodic minimal surface lattices10.1016/j.jmrt.2022.02.086 ↗
7. Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials
8. Computational and experimental characterization of 3D-printed PCL structures toward the design of soft biological tissue scaffolds10.1016/j.matdes.2020.108488 ↗
9. Different approaches for manufacturing Ti-6Al-4V alloy with triply periodic minimal surface sheet-based structures by electron beam melting10.3390/ma14174912 ↗
10. 3D printing of drug-loaded gyroid lattices using selective laser sintering10.1016/j.ijpharm.2018.05.044 ↗
11. Application of TPMS structure in bone regeneration10.1016/j.engreg.2021.09.004 ↗
12. Microarchitected stretching-dominated mechanical metamaterials with minimal surface topologies10.1002/adem.201800029 ↗
13. Design and characterization of sheet-based gyroid porous structures with bioinspired functional gradients10.3390/ma13173844 ↗
14. Minimal surface scaffold designs for tissue engineering10.1016/j.biomaterials.2011.06.012 ↗
15. Mechanical properties and energy–absorption capabilities of thermoplastic sheet gyroid structures
16. Increased efficiency gyroid structures by tailored material distribution10.1016/j.matdes.2020.109096 ↗
17. Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing10.1016/j.polymer.2017.11.049 ↗
18. Comparison of mechanical properties and energy absorption of sheet-based and strut-based gyroid cellular structures with graded densities10.3390/ma12132183 ↗
19. Functionally graded porous scaffolds in multiple patterns: new design method, physical and mechanical properties10.1016/j.matdes.2018.09.053 ↗
20. Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
21. Garboczi · 1999
22. Tuning surface curvatures and young's moduli of TPMS-based lattices independent of volume fraction10.1016/j.matdes.2022.110542 ↗
23. On the directional elastic modulus of the TPMS structures and a novel hybridization method to control anisotropy10.1016/j.matdes.2021.110074 ↗
24. Gibson · 1997
25. Multifunctional mechanical-metamaterials based on triply periodic minimal surface lattices: a review
26. Bioinspired heat exchangers based on triply periodic minimal surfaces for supercritical CO2 cycles10.1016/j.applthermaleng.2020.115686 ↗
27. Mechanical properties of 3D printed polymeric Gyroid cellular structures: experimental and finite element study10.1016/j.matdes.2019.107597 ↗
28. Comparison of compression performance and energy absorption of lattice structures fabricated by selective laser melting10.1002/adem.202000453 ↗
29. Investigation of functionally graded TPMS structures fabricated by additive manufacturing
30. Design and mechanical testing of porous lattice structure with independent adjustment of pore size and porosity for bone implant10.1016/j.jmrt.2022.04.002 ↗
31. Mechanical and energy absorption properties of functionally graded lattice structures based on minimal curved surfaces
32. Energy absorption of circular aluminium tubes with functionally graded thickness under axial impact loading10.1080/13588265.2014.982269 ↗
33. Thin-walled structures as impact energy absorbers10.1016/S0263-8231(02)00082-4 ↗
34. 2019
35. Computational design and characterisation of gyroid structures with different gradient functions for porosity adjustment10.3390/ma15103730 ↗
36. 2011
37. 3D data export for additive manufacturing - improving geometric accuracy10.1016/j.procir.2016.05.046 ↗
38. Ashby · 2000
39. Mechanical behavior of Al–Si10–Mg gyroid surface with variable topological parameters fabricated via laser powder bed fusion10.1016/j.jmrt.2021.11.008 ↗
40. Crashworthiness analysis and optimization design of TPMS-filled structure
41. Kadi4Mat : a research data infrastructure for materials science