An investigation on the hot workability and microstructural evolution of a novel dual-phase Mg–Li alloy by using 3D processing maps
Source abstract
Abstract
Hot compression tests of a novel dual-phase Mg–Li alloy were performed in temperature range of 200–400 °C and strain rate range of 0.01–10s−1. 2D and 3D processing maps were established using Prasad's and Murty's instability criteria (methods) based on the dynamic materials model. It was found that one instability region obtained based on Prasad's instability criterion exist in the domain of power dissipation efficiency at a strain of 0.7. Prasad's and Murty's instability criteria are difficult to accurately characterize the instability characteristics of the alloy. The accuracy processing map rectified was obtained by means of Murty's and Prasad's instability criteria and microstructural analysis. On the basis of the processing map rectified, the optimum hot working parameters were obtained to be the temperature range of 320–400 °C and strain rate range of 0.01–0.4s−1 with the peak power dissipation efficiency. In this domain, the α phase undergone dynamic recrystallization (DRX) and dynamic recovery (DRV). The β-phase occurred DRX during the hot deformation. The instability regions lie in the temperature range of 200–250 °C with strain rate range of 0.01–1s−1 and the temperature range of 200–312 °C with strain rate range of 1–10s−1. Microstructural observations indicate that characteristics of the flow instabilities were flow localization, deformation twinning, the adiabatic shear bands and macro/micro cracking. The rectified processing map was successfully verified by the hot rolling test. The rectified processing map could accurately characterize workability characteristics of a novel dual-phase Mg–Li alloy and could be used for the optimization of hot working process parameters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Mechanical properties and microstructures of various Mg-Li alloys10.1016/j.matlet.2006.03.052 ↗
2. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
3. Magnesium: properties-applications-potential10.1016/S0921-5093(00)01351-4 ↗
4. Development of lightweight Mg-Li-Al alloys with high specific strength10.1016/j.jallcom.2016.04.109 ↗
5. Influence of Li addition on the microstructures and mechanical properties of Mg-Li alloys10.1007/s12540-019-00528-4 ↗
6. Ex-situ EBSD investigation of the reduced c/a values and work hardening behavior in Mg-4Li-1Al-0.5Y alloy under hot compression10.1016/j.msea.2020.140113 ↗
7. Using ab initio calculations in designing bcc Mg-Li alloys for ultra-lightweight applications10.1016/j.actamat.2008.08.037 ↗
8. Deformation behaviour of Mg-Li-Al alloys10.1016/j.jallcom.2004.01.040 ↗
9. Simultaneously improved mechanical strength and corrosion resistance of Mg-Li-Al alloy by solid solution treatment10.1016/j.matlet.2021.130305 ↗
10. Influence of bimodal grain size distribution on the corrosion resistance of Mg-4Li-3Al-1Zn (LAZ431)10.1016/j.jmrt.2021.04.078 ↗
11. Effect of Y content on microstructure and mechanical properties of as-cast Mg-8Li-3Al-2Zn alloy with duplex structure10.1016/j.msea.2015.10.067 ↗
12. Effect of grain refinements on the microstructure and thermal behaviour of Mg-Li-Al alloy10.1007/s10973-018-7223-x ↗
13. Characterization of hot deformation behavior of as-extruded AZ31 alloy through kinetic analysis and processing maps10.1016/j.jmatprotec.2019.116325 ↗
14. Constitutive modeling of flow behavior and processing maps of Mg-8.1 Gd-4.5Y-0.3Zr alloy10.1016/j.jma.2020.02.018 ↗
15. Hot deformation behavior and workability characteristic of a fine-grained Mg-8Sn-2Zn-2Al alloy with processing map10.1016/j.jmst.2018.12.001 ↗
16. Characterization of hot deformation behavior of extruded ZK60 magnesium alloy using 3D processing maps10.1016/j.matdes.2013.11.037 ↗
17. Hot deformation and processing maps of extruded ZE41A magnesium alloy10.1016/j.matdes.2009.12.008 ↗
18. Hot deformation behaviors of AZ91 magnesium alloy: constitutive equation, ANN-based prediction, processing map and microstructure evolution10.1016/j.jallcom.2022.164580 ↗
19. Constitutive modeling and hot deformation behavior of duplex structured Mg-Li-Al-Sr alloy10.1016/j.jmst.2016.11.015 ↗
20. Deformation behavior and phase transformation of a dual-phase Mg-8.9Li-2.7Al-0.85Si alloy under compression test at elevated temperatures10.1016/j.jallcom.2022.167034 ↗
21. Hot deformation behavior and microstructural evolution for dual-phase Mg-9Li-3Al alloys10.1016/j.jmrt.2022.06.047 ↗
22. Hot deformation behavior of Mg-8Li-3Al-2Zn-0.2Zr alloy based on constitutive analysis, dynamic recrystallization kinetics, and processing map10.1016/j.mechmat.2019.02.005 ↗
23. Hot deformation behavior and processing map of a superlight dual-phase Mg-Li alloy10.1016/j.jallcom.2018.07.024 ↗
24. Prasad · 2015
25. Hot-working characteristics of nichrome and the development of a processing map10.1016/0924-0136(94)90005-1 ↗
26. Ziegler · 1965
27. On the development of instability criteria during hotworking with reference to IN 71810.1016/S0921-5093(98)00764-3 ↗
28. Instability criteria for hot deformation of materials10.1179/095066000771048782 ↗
29. Identification of flow instabilities in the processing maps of AISI 304 stainless steel10.1016/j.jmatprotec.2004.09.089 ↗
30. On the hot working characteristics of 2014 Al-20 vol% Al2O3 metal matrix composite10.1016/j.jmatprotec.2004.09.088 ↗
31. Constitutive modeling and inverse analysis of the flow stress evolution during high temperature compression of a new ZE20 magnesium alloy for extrusion applications10.1016/j.msea.2018.10.028 ↗
32. Friction assessment in uniaxial compression test: a new evaluation method based on local bulge profile10.1016/j.jmatprotec.2016.12.023 ↗
33. Study of the structure and mechanical properties of corrosion-resistant steel with a high concentration of boron at elevated temperatures10.1134/S0031918X14080031 ↗
34. Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy10.1007/s11661-005-0284-z ↗
35. Forming behavior and workability of 6061/B4CP composite during hot deformation10.1016/j.compscitech.2011.02.009 ↗
36. Flow stress prediction during hot working of near-α titanium alloys10.1016/j.msea.2006.10.032 ↗
37. Ebrahimi · 2004 · 152 · 136
38. Hot deformation behavior and processing workability of a Ni-based alloy10.1016/j.jallcom.2018.08.010 ↗
39. The prediction of hot flow behavior of Al-6%Mg alloy10.1016/j.mechrescom.2008.06.011 ↗
40. Determination of a constitutive relationship for AZ31B magnesium alloy and validation through comparison between simulated and real extrusion10.1016/j.jmatprotec.2005.09.021 ↗
41. The adiabatic correction factor for deformation heating during the uniaxial compression test10.1361/105994901770344593 ↗
42. Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300-950°C10.1016/j.msea.2004.08.049 ↗
43. Dynamic recrystallization: mechanical and microstructural considerations10.1016/0001-6160(84)90049-X ↗
44. Multi-phase-field simulations for dynamic recrystallization10.1016/j.commatsci.2008.12.009 ↗
45. Modeling the dynamic recrystallization under multi-stage hot deformation10.1016/j.actamat.2004.06.022 ↗
46. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
47. Microstructure evolution and constitutive equation for the hot deformation of LZ91 Mg alloy10.1016/j.cattod.2017.10.019 ↗
48. Dynamic recrystallization behavior of Mg-Li-Al-Nd duplex alloy during hot compression10.1016/j.jallcom.2015.03.144 ↗
49. Hot formability study of Cr5 alloy steel by Integration of FEM and 3D processing maps10.3390/ma15144801 ↗
50. Flow behavior and processing map of as-cast Mg-10Gd-4.8Y-2Zn-0.6Zr alloy10.1016/j.msea.2010.08.090 ↗
51. Comparative study on high temperature deformation behavior and processing maps of Mg-4Zn-1RE-0.5Zr alloy with and without in-situ sub-micron sized TiB2 reinforcement10.1016/j.jma.2021.12.009 ↗
52. Guo · Mater Des · 2012 · 41 · 15810.1016/j.matdes.2012.04.044 ↗
53. Processing map for hot working characteristics of a wrought 2205 duplex stainless steel10.1016/j.matdes.2010.09.030 ↗
54. An experimental study of the recrystallization mechanism during hot deformation of aluminium10.1016/S0921-5093(00)00733-4 ↗
55. Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 747510.1016/j.actamat.2008.09.001 ↗