Research on fiber laser welding formation, microstructure, and mechanical properties of 7.5 mm 304 stainless steel
Source abstract
Abstract
304 austenitic stainless steel with a thickness of 7.5 mm was welded by high-power fiber laser welding. The effects of main welding parameters, including laser power, welding speed, and defocusing amount, on weld formation were studied in detail. The welding parameters were optimized according to the weld formation. On this basis, the microstructure and mechanical properties of the welded joints were further analyzed. The results showed that depression and hump defects easily occurred once the joints were penetrated. The defects could be effectively avoided when two specific parameters were adopted: namely, high-power laser welding with high speed at the focal position or low speed at the far defocusing position; both could reduce the impact of metal vapor in the keyhole on the molten pool, and meet the requirements of penetration and stability to obtain well-formed welds. High-speed welding obtained nail-shaped weld, and Peanut-shaped weld was obtained by low-speed welding. The microstructure of the welds was mainly composed of massive austenite and a small amount of ferrite, indicating that the solidification abided by the F-A mode according to the pseudo-binary phase diagram. Due to the smaller grain size, the hardness of the Nail-shaped weld (238.8HV0.3) was higher than that of the Peanut-shaped weld (223.4HV0.3). The tensile strength of the Nail-shaped weld joint and Peanut-shaped weld joint were 677 MPa and 689 MPa, which reached more than 95% of the base metal.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Comparative study of pulsed Nd: YAG laser welding of AISI 304 and AISI 316 stainless steels10.1016/j.optlastec.2016.08.018 ↗
2. Melt flow and microstructural characteristics in beam oscillation superimposed laser welding of 304 stainless steel[J]10.1016/j.jmapro.2019.12.053 ↗
3. Effect of low-temperature cooling on corrosion properties of laser welding Hastelloy C-276/304 stainless steel with filler wire
4. Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints10.1016/j.matdes.2011.02.017 ↗
5. Microstructure and corrosion behavior of multipass gas tungsten arc welded 304L stainless steel10.1016/j.matdes.2013.10.064 ↗
6. Effect of solution annealing on microstructure and mechanical properties of a Ni-Cr-W-Fe alloy10.1016/j.jmst.2016.06.026 ↗
7. Microstructure and mechanical properties of similar and dissimilar stainless steel electron beam and friction welds10.1007/s00170-009-2019-6 ↗
8. High quality welding of stainless steel with 10 kW high power fiber laser10.1179/136217108X372531 ↗
9. Microstructural and corrosion resistance study on plasma arc welded joints of AISI 304 and AISI 316
10. Thermal efficiency analysis for laser-assisted plasma arc welding of AISI 304 stainless steel10.3390/ma12091460 ↗
11. Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding10.1016/j.optlaseng.2009.08.009 ↗
12. Quality assessment in laser welding: a critical review10.1007/s00170-017-0461-4 ↗
13. Optimization of laser welding process parameters in dissimilar joint of stainless steel AISI316/AISI1018 low carbon steel to attain the maximum level of mechanical properties through PWHT10.1016/j.optlastec.2018.11.035 ↗
14. Laser and hybrid laser welding of type 316L (N) austenitic stainless steel plates10.1080/10426914.2020.1745231 ↗
15. Fiber laser welding of AISI 304 stainless steel plates10.2207/qjjws.27.69s ↗
16. Microstructure and microhardness of fiber laser butt welded joint of stainless steel plates10.1016/j.matdes.2013.02.059 ↗
17. Residual stress, micro-hardness and tensile properties of ANSI 304 stainless steel thick sheet by fiber laser welding10.1016/j.msea.2012.11.001 ↗
18. Correlation of high power laser welding parameters with real weld geometry and microstructure10.1016/j.optlastec.2017.03.004 ↗
19. Real weld geometry determining mechanical properties of high power laser welded medium plates10.1016/j.optlastec.2017.11.047 ↗
20. Microstructure and properties of weld joint during 10 kW laser welding with surface-active element sulfur10.1016/j.apsusc.2017.07.262 ↗
21. Improving laser welding via decreasing central beam density with a hollow beam10.1016/j.jmapro.2021.12.001 ↗
22. Microstructure characteristics and mechanical properties of fiber-diode hybrid laser welded 304 austenitic stainless steel10.1016/j.msea.2022.143884 ↗
23. Optimization of deep penetration laser welding of thick stainless steel with a 10 kW fiber laser10.1016/j.matdes.2013.06.066 ↗
24. Analysis of mechanisms of underfill in full penetration laser welding of thick stainless steel with a 10 kW fiber laser10.1016/j.optlastec.2017.07.037 ↗
25. Root stability in hybrid laser welding10.2351/1.4983161 ↗
26. Effects of laser focusing properties on weldability in high-power fiber laser welding of thick high-strength steel plate10.2351/1.4966258 ↗
27. Factors affecting weld root morphology in laser keyhole welding10.1016/j.optlaseng.2017.10.005 ↗
28. Single pass hybrid laser-arc welding of 25 mm thick square groove butt joints10.1016/j.matdes.2016.02.041 ↗
29. Hybrid fiber laser–Arc welding of thick section high strength low alloy steel10.1016/j.matdes.2011.02.002 ↗
30. Full penetration welding of thick high tensile strength steel plate with high-power disk laser in low vacuum10.1080/09507116.2017.1346776 ↗
31. Experimental and numerical investigation of single-pass laser welding of 20 mm-thick high-strength steel under reduced ambient pressure10.1016/j.jmrt.2021.09.030 ↗
32. Laser beam welding under vacuum of high grade materials10.1007/s40194-016-0302-3 ↗
33. Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel10.1016/j.jmatprotec.2013.11.013 ↗
34. Ustundag · 2018
35. Periodic root humps in thick-plate laser welding using steady electromagnetic force