Optimized method for the identification of slip directions in Mg alloy based on intragranular misorientation axes analysis
Source abstract
Abstract
In this work, an optimized method was proposed to identify the activated slip directions (i.e., gliding direction of dislocations) based on intragranular misorientation axes (IGMA) analysis only using electron backscattered diffraction (EBSD) data. By using MTEX toolbox in MATLAB software, the figures which showed the slip directions and the change of rotation angles (i.e, the grain reference orientation deviation (GROD) angles) in each grain, were plotted based on the EBSD data. By comparing the directions in which the GROD angle increases with the slip directions in the grain, the potential activated prismatic slip directions can be determined. Taking two grains in the extruded Mg–6Zn–1Y-0.5Zr alloy as examples. Two different prismatic slip directions belonging to two prismatic slip systems, [1-210] (GROD value: 0.64 → 0.75) and [-12-10] (GROD value: 0.34 → 0.74), were activated in the grain 1. Meanwhile, only one prismatic slip system, (10-10) [-12-10] (GROD value: 0.29 → 0.8), was initiated in the grain 2. Moreover, this method was further applied to determine the basal slip systems. Two basal slip systems, (0001) [-12-10] (GROD value: 2.7 → 4) and (0001) [-2110] (GROD value: 3.2 → 4.2), were activated in the selected grains, demonstrating that this method is also suitable for identifying the basal slip systems except for the prismatic systems. In summary, a novel method to determine the active slip directions in Mg alloys was successfully developed and experimentally validated in Mg alloys, which was simpler and more efficient compared to other widely utilized methods.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Effect of Al on expansion behavior of Mg–Al alloys during solidification10.1007/s40195-018-0780-y ↗
2. Current issues in magnesium sheet alloys: where do we go from here?10.1016/j.scriptamat.2014.04.017 ↗
3. Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying10.1016/j.jma.2020.08.016 ↗
4. Developing a low-alloyed fine-grained Mg alloy with high strength-ductility based on dislocation evolution and grain boundary segregation10.1016/j.scriptamat.2021.114414 ↗
5. Effect of Al content on the corrosion behavior of extruded dilute Mg–Al–Ca–Mn alloy
6. Unveiling the deformation mechanism of highly deformable magnesium alloy with heterogeneous grains10.1016/j.scriptamat.2022.114963 ↗
7. Texture softening in a rare earth elements-containing AZ31 magnesium alloy during hot compression deformation10.1016/j.jmrt.2022.04.079 ↗
8. In-situ TEM observation and MD simulation of the reaction and transformation of <100> loops in tungsten during H2+ & He+ dual-beam irradiation10.1016/j.scriptamat.2021.114154 ↗
9. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes10.1007/s11661-010-0410-4 ↗
10. Effect of deformation temperature on the slip activity in pure Mg and AZX21110.1016/j.jmrt.2022.06.050 ↗
11. Investigation on microstructure and mechanical properties of hot-rolled AZ31 Mg alloy with various cryogenic treatments10.1016/j.jmrt.2022.07.019 ↗
12. The influence of initial texture, microstructure and deformation behavior on the low mechanical anisotropy of extruded Mg alloy tube10.1016/j.jmrt.2022.08.053 ↗
13. Hot deformation behavior, microstructure evolution and slip system of Mg-2Zn-0.5Mn-0.2Ca alloy10.1016/j.jmrt.2022.10.012 ↗
14. Unveiling the interplay of deformation mechanism in wrought Mg–Sc alloy with different content of manganese10.1016/j.jmrt.2022.08.091 ↗
15. Abnormal texture development in magnesium alloy Mg–3Al–1Zn during large strain electroplastic rolling: effect of pulsed electric current10.1016/j.ijplas.2016.09.004 ↗
16. Basal slip mediated tension twin variant selection in magnesium WE43 alloy10.1016/j.actamat.2019.03.018 ↗
17. Identification of active slip systems in polycrystals by slip trace - modified lattice rotation analysis (ST-MLRA)10.1016/j.scriptamat.2022.114648 ↗
18. Tong · 2018
19. Tong
20. Development of grain-scale slip activity and lattice rotation fields in Inconel 71810.1016/j.actamat.2022.117627 ↗
21. Grain size effect on tensile properties and slip systems of pure magnesium
22. The role of grain boundary plane in slip transfer during deformation of magnesium alloys
23. Role of grain boundary segregation on microstructural development in basal-textured Mg-Al-Zn alloy sheet10.1016/j.scriptamat.2022.114828 ↗
24. Activation of non-basal slip in coarse-grained Mg-Sc alloy10.1016/j.scriptamat.2022.114830 ↗
25. Grain-size-dependent ductile-to-brittle fracture mechanism of titanium sheets10.1016/j.scriptamat.2022.114877 ↗
26. Grain size effect on tensile properties and slip systems of pure magnesium10.1016/j.actamat.2020.116604 ↗
27. Callister · 2018
28. Effect of grain boundaries on texture formation during dynamic recrystallization of magnesium alloys10.1016/j.actamat.2017.01.063 ↗
29. Effect of initial texture on texture and microstructure evolution of ME20 Mg alloy subjected to hot rolling10.1016/j.msea.2012.09.074 ↗
30. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y10.1016/S1359-6454(01)00297-X ↗
31. Effects of Sn addition on the microstructure and mechanical properties of extruded Mg–Bi binary alloy10.1016/j.jma.2021.04.015 ↗
32. Texture analysis in hexagonal materials10.1016/S0254-0584(03)00168-8 ↗