journal article·2023-07Open access

Microstructure evolution and mechanical properties during long-term tempering of a low carbon martensitic stainless bearing steel

Hao Chen, Tianyi Zeng, Quanqiang Shi, Naiming Wang, Shuzhan Zhang, Ke Yang, Wei Yan, Wei Wang

Abstract

Effect of tempering time on microstructure and tensile properties of a low carbon martensitic stainless bearing steel was studied. Results showed that martensitic blocks became coarser and dislocation annihilation continuously took place during tempering process. It was also found that the number of M2C and M6C was increased firstly and then decreased, while their sizes were increased constantly. Moreover, the austenite content was increased due to the formation of reverted austenite. For tensile properties characterization, there was a transition from a ductile fracture to a quasi-cleavage fracture with increasing tempering time. Yield strength peaked when the steel was tempered for 24 h, followed by a constant decline. The abnormal decrease in elongation after long-term tempering was due to the formation of coarsening M23C6 at grain boundaries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Pearson · 1998 · vol. 1327 · 335
2. On the fatigue life of M50 NiL rolling bearings10.1080/10402009208982178 ↗
3. Steels for bearings10.1016/j.pmatsci.2011.06.002 ↗
4. Enhancing the tribological and mechanical properties of M50 steel using solid lubricants – a detailed review
5. Progress in the evaluation of CSS-42L™: a high performance bearing alloy10.1520/STP10867S ↗
6. Burrier · 1998
7. Effect of tempering temperature on the microstructure and properties of ultrahigh-strength stainless steel10.1016/j.jmst.2019.01.009 ↗
8. Tempering influence on microstructural evolution and mechanical properties in a core of CSS-42L bearing steel10.1016/j.msea.2022.144233 ↗
9. Microstructural evolution during tempering and intrinsic strengthening mechanisms in a low carbon martensitic stainless bearing steel10.1016/j.msea.2022.142736 ↗
10. MWP-fit: a program for multiple whole-profile fitting of diffraction peak profiles by ab initio theoretical functions
11. Correlation between strength and microstructure of ball-milled Al–Mg alloys determined by X-ray diffraction10.1016/j.msea.2004.01.089 ↗
12. Effect of NbC and VC carbides on microstructure and strength of high-strength low-alloyed steels for oil country tubular goods10.1016/j.msea.2021.141845 ↗
13. Evolution of microstructures, dislocation density and arrangement during deformation of low carbon lath martensitic steels
14. Stored energy in ultrafine-grained 316L stainless steel processed by high-pressure torsion10.1016/j.jmrt.2017.05.001 ↗
15. In situ analysis of plastic deformation of lath martensite during tensile process
16. Effects of deep cryogenic treatment on microstructural evolution and alloy phases precipitation of a new low carbon martensitic stainless bearing steel during aging10.1016/j.msea.2018.07.012 ↗
17. Evaluation of the block boundary and sub-block boundary strengths of ferrous lath martensite using a micro-bending test10.1016/j.msea.2010.08.026 ↗
18. Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel10.1016/j.jmst.2020.04.001 ↗
19. Achieving superior low-temperature toughness in high-strength low-carbon steel via controlling lath boundary segregation10.1016/j.jmrt.2023.03.110 ↗
20. Quantitative evaluation of dislocation density in as-quenched martensite with tetragonality by X-ray line profile analysis in a medium-carbon steel10.1016/j.actamat.2022.118052 ↗
21. Effect of different thermal treatment temperatures on dimensional stability and mechanical properties of M50 steel10.1016/j.jmrt.2022.02.060 ↗
22. Effect of tempering on carbides and hydrogen embrittlement in E690 high strength marine structural steel10.1007/s42243-022-00745-z ↗
23. Progress on improving strength-toughness of ultra-high strength martensitic steels for aerospace applications: a review10.1016/j.jmrt.2022.12.177 ↗
24. Alloy design and creep strength of advanced 9%Cr USC boiler steels containing high concentration of boron10.1179/174892406X173611 ↗
25. Microstructure-dependent hydrogen diffusion and trapping in high-tensile steel10.1016/j.msea.2020.139418 ↗
26. Lattice-parameter variation with carbon content of martensite. I. X-ray-diffraction experimental study10.1103/PhysRevB.52.9970 ↗
27. Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel10.1007/s42243-020-00527-5 ↗
28. Austenite layer and precipitation in high Co-Ni maraging steel10.1016/j.micron.2014.07.008 ↗
29. Austenite and precipitation in secondary-hardening ultra-high-strength stainless steel10.1016/j.matchar.2018.07.038 ↗
30. Effect of quenching and tempering treatment on microstructure and mechanical properties of CSS-42L bearing steel10.1007/s11665-022-06677-9 ↗
31. The microstructures and mechanical properties of a highly alloyed Al-Zn-Mg-Cu alloy: the role of Cu concentration10.1016/j.jmrt.2022.02.071 ↗
32. Nanoscale cementite precipitates and comprehensive strengthening mechanism of steel10.1007/s11661-011-0767-z ↗
33. Strengthening mechanism of 600 MPa grade Nb-Ti microalloyed high formability crossbeam steel
34. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
35. Nano-sized precipitation and properties of a low carbon niobium micro-alloyed bainitic steel10.1016/j.msea.2015.05.101 ↗
36. χ phase and its effect on the mechanical properties of a Mo-bearing high–Si austenitic stainless steel after aging at 650°C10.1016/j.jmrt.2023.02.069 ↗
37. Mechanical properties and tensile deformation behavior of a reduced activated ferritic-martensitic (RAFM) steel at elevated temperatures10.1016/j.msea.2018.03.119 ↗
38. Designing quadplex (four-phase) microstructures in an ultrahigh carbon steel10.1016/j.msea.2014.06.023 ↗
39. On the structure-property relationship in a novel 1000 MPa hot-rolled TRIP steel with strain-assisted ferrite transformation10.1016/j.msea.2021.141594 ↗
40. Microstructure and mechanical behaviors of GPa-grade TRIP steels enabled by hot-rolling processes
41. The effect of silicon on precipitation and decomposition behaviors of M6C carbide in a Ni–Mo–Cr superalloy10.1016/j.jallcom.2014.09.112 ↗
42. Effect of temperature on tensile behavior of Ni–Cr–W based superalloy10.1016/j.msea.2010.11.053 ↗
43. Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni–Cr–W based superalloy10.1016/j.msea.2012.03.092 ↗
44. Microstructure evolution of a Ni–Cr–W superalloy during long-term aging at high temperatures10.1016/j.matchar.2015.06.018 ↗
45. Effect of initial martensite and tempered carbide on mechanical properties of 3Cr2MnNiMo mold steel10.1016/j.msea.2021.141080 ↗
46. Effects of grain boundary carbides on the tensile and impact properties of type 316 stainless steel10.1016/0025-5416(86)90223-5 ↗