Microstructural evolution characteristics and a unified dislocation-density related constitutive model for a 7046 aluminum alloy during hot tensile
Source abstract
Abstract
Hot tensile features of a commercial 7046 aluminum alloy are investigated through employing high-temperature tensile tests. The evolving mechanisms of microstructures over high-temperature tensile parameters are systematically revealed. A unified dislocation-density related constitutive model is proposed to reconstruct hot tensile stress–strain behaviors. Results imply that the microstructural evolving features are acutely influenced by tensile parameters. The principal softening mechanism converts from dynamic recovery (DRV) to dynamic recrystallization (DRX), as the tensile temperature reaches 350 °C or above. The combined DRX nucleation features containing discontinuous DRX (DDRX) as well as continuous DRX (CDRX) together emerge. Furthermore, the CDRX behavior characterized by substructural nucleation and interaction becomes apparent at low tensile temperature or high strain rate, while the DDRX process is weaken. Through validation, the reproduced tensile stress, grain size as well as DRX fraction are good accordance with experimented values, which proves the proposed dislocation-density related equation can enjoy an outstanding reproduced capacity for the thermal tensile features of a 7046 aluminum alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys10.1016/j.jallcom.2022.163964 ↗
2. Prediction of the hot compressive deformation behavior for superalloy nimonic 80A by BP-ann model10.3390/app6030066 ↗
3. Competition between work-hardening effect and dynamic-softening behavior for processing as-cast GH4720Li superalloys with original dendrite microstructure during moderate-speed hot compression10.1016/j.msea.2015.07.007 ↗
4. An enhanced johnson–cook model for hot compressed A356 aluminum alloy10.1002/adem.202000704 ↗
5. High-temperature tensile characteristics and constitutive models of ultrahigh strength steel10.1016/j.msea.2020.140491 ↗
6. Microstructure evolution and constitutive model for a Ni-Mo-Cr base alloy in double-stages hot compression with step-strain rates10.1016/j.matchar.2022.112385 ↗
7. Microstructural evolution and an improved dynamic recrystallization kinetic model of a Ni-Cr-Mo alloy in hot deformation10.3390/ma15093161 ↗
8. Modeling of dynamic recrystallization volume fraction evolution for AlCu4SiMg alloy and its application in FEM10.1016/S1003-6326(19)65022-3 ↗
9. Prediction of constitutive behavior and microstructure evolution in hot deformation of TA15 titanium alloy10.1016/j.matdes.2013.03.103 ↗
10. Kinetics equations and microstructural evolution during metadynamic recrystallization in a nickel-based superalloy with delta phase10.1016/j.jallcom.2016.08.096 ↗
11. Microstructure evolution and a unified constitutive model of Ti-55511 alloy compressed at stepped strain rates10.3390/ma14226750 ↗
12. Flow characterization of magnesium alloy ZK61 during hot deformation with improved constitutive equations and using activation energy maps10.1016/j.ijmecsci.2020.106069 ↗
13. A modified Johnson-Cook model for 10%Cr steel at elevated temperatures and a wide range of strain rates10.1016/j.msea.2017.10.037 ↗
14. Study on hot deformation behavior and workability of squeeze-cast 20 vol% SiCw/6061Al composites using processing map10.1016/j.matchar.2017.11.026 ↗
15. Experimental and numerical investigations on hot deformation behavior and processing maps for ASS 304 and ASS 31610.1515/htmp-2017-0047 ↗
16. Hot deformation behavior of a differential pressure casting Mg–8Gd–4Y–Nd–Zr alloy10.1007/s11665-016-2422-8 ↗
17. Constitutive analysis in hot working10.1016/S0921-5093(01)01117-0 ↗
18. High temperature behavior of severely deformed AA 5083 through equal channel lateral extrusion10.1016/j.matchemphys.2019.122581 ↗
19. Multiscale constitutive modeling of additively manufactured Al–Si–Mg alloys based on measured phase stresses and dislocation density10.1016/j.ijplas.2021.102972 ↗
20. Hot tensile behavior of a low-alloyed ultrahigh strength steel: fracture mechanism and physically-based constitutive model10.1016/j.jmrt.2021.05.100 ↗
21. Microstructure and mechanical properties of Al–6Zn–2.5Mg–1.8Cu alloy prepared by squeeze casting and solid hot extrusion10.1016/S1003-6326(15)63824-9 ↗
22. A single-step hot stamping-forging process for aluminum alloy shell parts with nonuniform thickness10.1016/j.jmatprotec.2015.07.009 ↗
23. Integrated model for describing the microstructure evolution of the inoculated Al-Zn-Mg-Cu alloys in continuous solidification10.1016/j.rinp.2021.104465 ↗
24. Enhancing mechanical properties and corrosion resistance of a high strength 7A99 Al alloy by introducing pre-rolling in solution and aging treatments10.1016/j.jallcom.2021.162972 ↗
25. Heterogeneous microstructure and deformation behavior of an automotive grade aluminum alloy10.1016/j.jallcom.2021.159413 ↗
26. Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy10.1016/j.matdes.2022.111135 ↗
27. T1 precipitate bands and particle stimulated nucleation in 2195 Al-Cu-Li alloy during hot deformation10.1016/j.jallcom.2022.164716 ↗
28. Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective10.1016/j.jallcom.2018.11.286 ↗
29. Effect of Zn content on the dynamic softening of Al–Zn–Mg–Cu alloys during hot compression deformation10.1016/j.vacuum.2020.109941 ↗
30. The deformation behavior and processing maps in the isothermal compression of 7A09 aluminum alloy10.1016/j.msea.2011.10.120 ↗
31. Modeling of flow behavior for 7050-T7451 aluminum alloy considering microstructural evolution over a wide range of strain rates10.1016/j.mechmat.2016.01.006 ↗
32. Characterization of dynamic microstructural evolution of AA7150 aluminum alloy at high strain rate during hot deformation10.1016/S1003-6326(16)64087-6 ↗
33. Hot deformation behavior and dynamic recrystallization kinetics of a novel Sc and Zr modified ultra-high-strength Al-Zn-Mg-Cu alloy10.1007/s11665-020-05255-1 ↗
34. Tensile behaviour of aluminium 7017 alloy at various temperatures and strain rates10.1016/j.jmrt.2015.12.002 ↗
35. Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature10.1016/j.msea.2013.12.012 ↗
36. Influence of strain rate on hot deformation behavior and recrystallization behavior under isothermal compression of Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2019.151788 ↗
37. Hot deformation behavior considering strain effects and recrystallization mechanism of an Al-Zn-Mg-Cu alloy10.3390/ma13071743 ↗
38. Hot deformation behavior and 3D processing maps of AA7020 aluminum alloy10.1016/j.jallcom.2020.156113 ↗
39. Effects of strain rate on flow stress behavior and dynamic recrystallization mechanism of Al-Zn-Mg-Cu aluminum alloy during hot deformation10.1016/j.msea.2016.03.027 ↗
40. Constitutive base analysis of a 7075 aluminum alloy during hot compression testing10.1016/j.matdes.2011.05.040 ↗
41. Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperature10.1016/j.msea.2009.09.042 ↗
42. Constitutive modeling of flow stress during hot deformation of Sn–Al–Zn–Cu–Mg multi-principal-element alloy10.1016/j.vacuum.2019.108970 ↗
43. Flow behavior modeling of the 7050 aluminum alloy at elevated temperatures considering the compensation of strain10.1016/j.matdes.2012.06.032 ↗
44. A new constitutive model for the plastic flow of metals at elevated temperatures10.1007/s11665-013-0779-5 ↗
45. Hot tensile behavior of a 7046-aluminum alloy: fracture mechanisms and constitutive models
46. Integrated physically based modeling for the multiple static softening mechanisms following multi-stage hot deformation in Al-Zn-Mg-Cu alloys10.1016/j.ijplas.2020.102809 ↗
47. Simple physically-based constitutive equations for hot deformation of 2024 and 7075 aluminum alloys10.1016/S1003-6326(15)63765-7 ↗
48. A physically-based constitutive modelling of a high strength aluminum alloy at hot working conditions10.1016/j.jallcom.2018.02.039 ↗
49. Multiscale modeling of discontinuous dynamic recrystallization during hot working by coupling multilevel cellular automaton and finite element method10.1016/j.ijplas.2021.103064 ↗
50. A unified constitutive model based on dislocation density for an Al-Zn-Mg-Cu alloy at time-variant hot deformation conditions10.1016/j.msea.2018.01.109 ↗
51. Constitutive description of 7075 aluminum alloy during hot deformation by apparent and physically-based approaches10.1007/s11665-015-1389-1 ↗
52. Hot deformation and dynamic recrystallization in Al-Mg-Si alloy10.1016/j.matchar.2021.110976 ↗
53. Unified modeling of flow behavior and microstructure evolution in hot forming of a Ni-based superalloy10.1016/j.msea.2016.03.044 ↗
54. Behavior and constitutive modelling of ductile damage of Ti-6Al-1.5Cr-2.5Mo-0.5Fe-0.3Si alloy under hot tensile deformation10.1016/j.jallcom.2018.11.360 ↗
55. Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach10.1016/j.ijplas.2020.102710 ↗
56. Extraordinary effect of the δ phase on the electrically-assisted deformation responses of a Ni-based superalloy10.1016/j.matchar.2018.08.018 ↗
57. Research on neural network wind speed prediction model based on improved sparrow algorithm optimization