Development of high thermal conductivity of Ag/diamond composite sintering paste and its thermal shock reliability evaluation in SiC power modules
Source abstract
Abstract
Diamond has the highest thermal conductivity among naturally occurring materials and a relatively low coefficient of thermal expansion (CTE), making it a promising interconnected material for next-generation semiconductor power devices. In this study, Ag/diamond composite sintering paste was developed. The agglomerated diamond particles were uniformly dispersed in the sintered Ag porous structure, and the thermal conductivity was increased from 171.4 W/(m∙k) for pure Ag sintering to 288 W/(m∙k) for an [email protected]%diamond (2% of the total weight of Ag) specimen. The interfacial microstructure evolution and fracture behavior were investigated in detail for a SiC/Direct Bond Copper (DBC) joint structure during an extreme thermal shock test (TST) in the range of -50 °C to 250 °C. Importantly, with a moderate amount of diamond additive, the microstructural degradation and severe deformation of the DBC substrate were effectively suppressed. This is mainly attributed to the diamond addition, which can block the migration pathways of Ag atoms toward long-term thermal shock and adjust the thermo-mechanical performance of the sintered layer. This detailed study about Ag/diamond composite paste can provide new guidance for strengthening sintered Ag interconnections for SiC power modules.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Macroscale and microscale fracture toughness of microporous sintered Ag for applications in power electronic devices10.1016/j.actamat.2017.02.065 ↗
2. Microstructural evolution and degradation mechanism of SiC–Cu chip attachment using sintered nano-Ag paste during high-temperature ageing10.1016/j.jallcom.2020.156442 ↗
3. Rapid and low temperature sintering bonding using Cu nanoparticle film for power electronic packaging10.1016/j.apsusc.2022.154422 ↗
4. Experimental and simulation results of optical beam induced current technique applied to wide bandgap semiconductors10.1016/j.mssp.2019.01.042 ↗
5. Oxidation-enhanced bonding strength of Cu sinter joints during thermal storage test10.1016/j.jmst.2021.10.047 ↗
6. Highly conductive Cu-Cu joint formation by low-temperature sintering of formic Acid-treated Cu nanoparticles10.1021/acsami.6b10280 ↗
7. A supersaturated Cu-Ag nanoalloy joint with ultrahigh shear strength and ultrafine nanoprecipitates for power electronic packaging10.1016/j.jmst.2022.10.038 ↗
8. Bonding of power device to ceramic substrate using Sn-coated Cu micro paste for high-temperature applications10.1016/j.apsusc.2020.146060 ↗
9. Sintering mechanism of a supersaturated Ag-Cu nanoalloy film for power electronic packaging10.1021/acsami.9b20731 ↗
10. Die-attach bonding for high temperature applications using thermal decomposition of copper (II) formate with polyethylene glycol10.1016/j.scriptamat.2020.02.045 ↗
11. Metal–metal bonding process using Ag metallo-organic nanoparticles10.1016/j.actamat.2005.01.047 ↗
12. Review of silver nanoparticle based die attach materials for high power/temperature applications10.1016/j.microrel.2017.01.010 ↗
13. A study of nanoparticles in Sn–Ag based lead free solders10.1016/j.microrel.2007.05.004 ↗
14. Novel Bi-containing Sn–1.5Ag–0.7Cu lead-free solder alloy with further enhanced thermal property and strength for mobile products10.1016/j.matdes.2014.10.006 ↗
15. Joint effects of Ti and Cu additions on microstructure and mechanical properties of Zn-25Sn-xCu-yTi high-temperature Pb-free solders10.1016/j.msea.2019.138323 ↗
16. Pressureless and low-temperature sinter-joining on bare Si, SiC and GaN by a Ag flake paste10.1016/j.scriptamat.2021.113833 ↗
17. Low-temperature and pressureless sinter joining of Cu with micron/submicron Ag particle paste in air10.1016/j.jallcom.2018.11.251 ↗
18. Laminar metal foam: a soft and highly thermally conductive thermal interface material with a reliable joint for semiconductor packaging10.1021/acsami.0c22434 ↗
19. Effect of (0–40) wt. % Si addition to Al on the thermal conductivity and thermal expansion of diamond/Al composites by pressure infiltration10.1016/j.jallcom.2015.12.255 ↗
20. Thermal conductivity of diamond/Ag composites with chromium carbide coated diamonds for the building materials of high power modules10.1179/1743284713Y.0000000419 ↗
21. Processing of diamond-particle-dispersed silver-matrix composites in solid–liquid co-existent state by SPS and their thermal conductivity10.1016/j.compositesb.2011.08.003 ↗
22. Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications10.1016/j.scriptamat.2007.10.011 ↗
23. High thermal conductivity diamond-doped silver paste for power electronics packaging10.1016/j.matlet.2021.131603 ↗
24. Ag die-attach paste modified by WC additive for high-temperature stability enhancement
25. Development of crack-less and deformation-resistant electroplated Ni/electroless Ni/Pt/Ag metallization layers for Ag-sintered joint during a harsh thermal shock10.1016/j.matdes.2022.111389 ↗
26. Thermal shock performance of DBA/AMB substrates plated by Ni and Ni-P layers for high-temperature applications of power device modules10.3390/ma11122394 ↗
27. Diamond/Ag-Ti composites with high thermal conductivity and excellent thermal cycling performance fabricated by pressureless sintering10.1016/j.jallcom.2019.06.167 ↗
28. Thermal properties of diamond/Ag composites fabricated by eletroless silver plating10.1016/j.diamond.2010.11.017 ↗
29. Large-scale ceramic–metal joining by nano-grained Ag particles paste sintering in low-temperature pressure-less conditions10.1016/j.scriptamat.2021.113747 ↗
30. Microstructure and mechanical properties of sintered Ag particles with flake and spherical shape from nano to micro size10.1016/j.matdes.2018.11.062 ↗
31. Quasi-in-situ observation of the grain growth and grain boundary movement in sintered Cu nanoparticle interconnects10.1016/j.actamat.2022.118135 ↗
32. High thermal conductive diamond/Cu–Ti composites fabricated by pressureless sintering technique10.1016/j.applthermaleng.2013.11.065 ↗
33. High thermal conductive diamond/Ag–Ti composites fabricated by low-cost cold pressing and vacuum liquid sintering techniques10.1016/j.diamond.2014.02.003 ↗
34. Migration and agglomeration behaviors of Ag nanocrystals in the Ag-doped diamond-like carbon film during its long-time service10.1016/j.carbon.2022.09.065 ↗
35. Approaching the structure-property relationship of sintered metal nano/microparticles from the perspective of the agglomerate size effect10.1016/j.powtec.2022.117254 ↗
36. Low temperature SiC die-attach bonding technology by hillocks generation on Al sheet surface with stress self-generation and self-release10.1038/s41598-020-66069-8 ↗
37. Bonding technology based on solid porous Ag for large area chips10.1016/j.scriptamat.2017.11.035 ↗
38. Development of Ag-in alloy pastes by mechanical alloying for die attachment of high-power semiconductor devices10.3390/ma15041397 ↗
39. Massive Ag migration through metal/ceramic nano-multilayers: an interplay between temperature, stress-relaxation and oxygen-enhanced mass transport10.1039/C6TC01098A ↗
40. Dynamics of grain boundaries under applied mechanical stress10.1007/s10853-010-5233-6 ↗
41. Strengthening of DBA substrate with Ni/Ti/Ag metallization for thermal fatigue-resistant Ag sinter joining in GaN power modules10.1007/s10854-020-02930-w ↗