journal article·2023-09Open access

A comparative study of deformation behaviors and ductility improvement in Mg–Gd–Zr and Mg–Zr cast alloys

Tianxu Zheng, Yaobo Hu, Bin Jiang, Liang Fu, Fusheng Pan, Aitao Tang

Abstract

This study investigates the impact of Gd elements on the enhancement of ductility in the Mg-Gd-Zr alloy. The deformation behavior at room temperature of the cast Mg-Gd-Zr alloy and the cast Mg-Zr alloy was examined using the EBSD-assisted slip trace method. The quantitative analysis of the initiation ratio of each slip system in the two alloys revealed that the Mg-Gd-Zr alloy had a higher ratio of non-basal slip systems. The experimental determination of the critical resolved shear stress (CRSS) ratios of non-basal slip to basal slip for both alloys indicated that the Gd elements could reduce this ratio, facilitating the initiation of more non-basal slip systems to accommodate strain. Furthermore, the segregation of Gd elements at grain boundaries was observed to enhance the grain boundary strength of the alloy, which is a significant factor in the enhancement of ductility.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Large plasticity in magnesium mediated by pyramidal dislocations10.1126/science.aaw2843 ↗
2. Mechanistic origin and prediction of enhanced ductility in magnesium alloys10.1126/science.aap8716 ↗
3. The role and significance of Magnesium in modern day research-A review10.1016/j.jma.2021.05.012 ↗
4. Magnesium and its alloys applications in automotive industry10.1007/s00170-007-1279-2 ↗
5. Development and application of magnesium alloy parts for automotive OEMs: a review10.1016/j.jma.2022.12.015 ↗
6. Recent developments in high-pressure die-cast magnesium alloys for automotive and future applications10.1016/j.jma.2022.10.001 ↗
7. Effect of Zn on mechanical and corrosion properties of Mg-Sc-Zn alloys10.1016/j.jmst.2023.01.058 ↗
8. The relation between ductility at high temperature and solid solution in Mg alloys10.1016/j.jma.2021.09.024 ↗
9. A study of high ductility Mg-2Gd-0.4Zr magnesium alloy under monotonic tension at room temperature10.1016/j.matchar.2021.111299 ↗
10. Strengthening effects of Zn addition on an ultrahigh ductility Mg–Gd–Zr magnesium alloy10.3390/ma11101942 ↗
11. Is Mg17Al12 ductile or brittle? A theoretical insight10.1016/j.jma.2021.06.006 ↗
12. Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility10.1016/j.jma.2022.04.002 ↗
13. Alloy design strategies to increase strength and its trade-offs together10.1016/j.pmatsci.2020.100720 ↗
14. Designing a magnesium alloy with high strength and high formability10.1038/s41467-018-04981-4 ↗
15. Recent advances in micro-alloyed wrought magnesium alloys: theory and design10.1016/S1003-6326(22)65907-7 ↗
16. Effect of addition of minor amounts of Sb and Gd on hot tearing susceptibility of Mg-5Al-3Ca alloy10.1016/j.jma.2021.05.015 ↗
17. Magnesium alloys as implant materials – principles of property design for Mg–RE alloys10.1016/j.actbio.2009.09.010 ↗
18. Micro-alloying Mg with Y, Ce, Gd and La for texture modification—a comparative study10.1016/j.msea.2009.12.036 ↗
19. Effect of rare earth elements on the microstructure and texture development in magnesium–manganese alloys during extrusion10.1016/j.msea.2010.07.081 ↗
20. Developing a Mg alloy with ultrahigh room temperature ductility via grain boundary segregation and activation of non-basal slips10.1016/j.ijplas.2023.103548 ↗
21. Mechanistic origin of the enhanced strength and ductility in Mg-rare earth alloys10.1016/j.actamat.2022.118550 ↗
22. Chemical ordering effects on martensitic transformations in Mg-Sc alloys10.1016/j.actamat.2023.118854 ↗
23. A quantitative microplasticity-based approach to rationalize the poor strengthening response of polycrystalline Mg alloys10.1016/j.jma.2021.08.036 ↗
24. The strain rate sensitive and anisotropic behavior of rare-earth magnesium alloy ZEK100 sheet10.1016/j.jma.2021.06.010 ↗
25. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
26. Comparative in vitro study on binary Mg-RE (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) alloy systems10.1016/j.actbio.2019.11.013 ↗
27. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys10.1016/j.actamat.2010.08.031 ↗
28. The relation between ductility and stacking fault energies in Mg and Mg–Y alloys10.1016/j.actamat.2012.02.006 ↗
29. Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure10.1016/S1359-6462(01)00996-4 ↗
30. Microstructure and mechanical properties in an AZ31 magnesium alloy sheet fabricated by asymmetric hot extrusion10.1016/j.msea.2008.06.015 ↗
31. The variant graph approach to improved parent grain reconstruction10.1016/j.mtla.2022.101399 ↗
32. Parent grain reconstruction from partially or fully transformed microstructures in MTEX10.1107/S1600576721011560 ↗
33. Anomalous effects of strain rate on the room-temperature ductility of a cast Mg-Gd-Y-Zr alloy10.1016/j.actamat.2018.08.013 ↗
34. Underlying slip/twinning activities of Mg-xGd alloys investigated by modified lattice rotation analysis10.1016/j.jma.2021.06.008 ↗
35. Transition of dominant deformation mode in bulk polycrystalline pure Mg by ultra-grain refinement down to sub-micrometer10.1016/j.actamat.2020.07.055 ↗
36. Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd10.1016/j.actamat.2019.11.034 ↗
37. Microstructure and mechanical properties of Mg–Gd–Zr alloys with low gadolinium contents10.1007/s10853-011-5540-6 ↗
38. Influence of extrusion conditions on microstructure and mechanical properties of Mg-2Gd-0.3Zr magnesium alloy10.1016/j.jma.2020.06.019 ↗
39. Quasi-in-situ study of the twinning evolution of ZC61 alloy during dynamic ED- ERD compression process10.1016/j.msea.2021.142576 ↗
40. Why are {102} twins profuse in magnesium?10.1016/j.actamat.2014.11.033 ↗
41. Transmission electron microscopy investigation on dislocation bands in pure Mg10.1016/j.scriptamat.2016.11.035 ↗
42. Activation and suppression of dislocations in a textured Mg–3Al–1Zn alloy10.1016/j.scriptamat.2019.11.057 ↗
43. Activation of non-basal slip in coarse-grained Mg-Sc alloy10.1016/j.scriptamat.2022.114830 ↗
44. Effect of solutes on strength and ductility of Mg alloys10.1016/j.actamat.2019.09.018 ↗
45. Improving ductility of a Mg alloy via non-basal slip induced by Ca addition10.1016/j.ijplas.2019.04.020 ↗
46. Detecting mechanical properties of microstructure units in Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy10.1016/j.msea.2014.08.044 ↗
47. Dislocation behavior in a polycrystalline Mg-Y alloy using multi-scale characterization and VPSC simulation10.1016/j.jmst.2021.03.087 ↗
48. Deformation behaviour of magnesium bicrystals with symmetrical 90° <110> tilt grain boundaries analysed by large area EBSD mapping10.1016/j.jma.2023.03.009 ↗
49. Effect of Zn content on the microstructural stability and grain growth kinetics of fine-grained extruded Mg–Gd–Zn alloys10.1016/j.jallcom.2020.154766 ↗
50. Solute clustering and grain boundary segregation in extruded dilute Mg–Gd alloys10.1016/j.scriptamat.2014.08.022 ↗
51. Annealing hardening effect aroused by solute segregation in gradient ultrafine-grained Mg–Gd–Zr alloy10.1016/j.jmst.2022.10.015 ↗
52. Actinide elements
53. Adsorption-induced interface decohesion10.1016/0001-6160(80)90112-1 ↗