journal article·2023-11Open access

Effect of nickel interlayer on laser welding of copper/titanium dissimilar metal joint

Yuhang Xie, Jiankang Huang, Jianhui Su, Yiming Luo, Hao Du, Ding Fan

Abstract

Cu/Ti dissimilar metal welding components have significant potential applications in aerospace, nuclear industries, and other fields. To achieve a robust connection between titanium (TA2) and copper (T2), this study conducted laser-welding experiments using nickel as an intermediate layer. The influence of a nickel intermediate layer on the joint formation, microstructure, mechanical properties, melting, and element diffusion behavior were investigated. The results revealed that without the addition of a nickel intermediate layer, when the laser beam was biased toward the titanium side during welding, a 17 μm thick layer of intermetallic compounds formed in the copper-side weld region. In this area, a notable concentration of fragile Ti–Cu intermetallic compounds forms, rendering it the weakest point in the joint. As a consequence, the ultimate tensile strength of the joint measures at 131 MPa, which is roughly 55 % of the tensile strength of the copper base material. The introduction of a nickel intermediate layer led to a change in the microstructure of the fusion zone, with Cu–Ti intermetallic compounds dispersed within, preventing the formation of brittle Ti–Cu phases at the copper interface. The addition of the nickel interlayer increased the tensile strength of the TA2-T2 joint to 224 MPa, which is approximately 94 % that of the copper parent material, and the joint exhibited ductile fracture behavior in the copper parent material's heat-affected zone.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Exploratory study on the effect of amplitude on ultrasonic spot welding of aerospace materials10.1016/j.matpr.2020.02.811 ↗
2. Study on the performance of high-speed rail damage of four different materials10.1155/2018/5016414 ↗
3. Deformation mechanisms in surface nano-crystallization of low elastic modulus Ti6Al4V/Zn composite during severe plastic deformation10.1016/j.scriptamat.2018.08.007 ↗
4. Interfacial reaction and microstructure evolution of nanoparticle-added Al/Cu welded interface under direct current treatment10.1016/j.mtcomm.2023.105327 ↗
5. High-strength and high-conductivity in situ Cu–TiB2 nanocomposites10.1016/j.msea.2021.141952 ↗
6. Understanding and designing metal matrix nanocomposites with high electrical conductivity: a review10.1007/s10853-022-07010-4 ↗
7. Dissimilar MIG-CMT weld-brazing of aluminium to steel: a review10.1016/j.jallcom.2018.12.336 ↗
8. Effect of filler metal composition on microstructure and mechanical properties of electron beam welded titanium/copper joint10.1016/j.jallcom.2018.10.222 ↗
9. Current research and development status of dissimilar materials laser welding of titanium and its alloys10.1016/j.optlastec.2020.106090 ↗
10. Upon the effect of Zn during friction stir welding of aluminum-copper and aluminum-brass systems10.1016/j.jmapro.2020.08.006 ↗
11. The effect of interface morphology on the electro-mechanical properties of Ti/Cu clad composites produced by explosive welding10.1007/s11661-019-05537-x ↗
12. Microstructural, electrochemical and tribo-electrochemical characterisation of titanium-copper biomedical alloys10.1016/j.corsci.2016.02.014 ↗
13. Strong bonding of titanium to copper through the elimination of the brittle interfacial intermetallics10.1557/JMR.2008.0269 ↗
14. The Cu− Ti (copper-titanium) system10.1007/BF02880329 ↗
15. Vacuum diffusion bonding of TC4 titanium alloy and T2 copper by a slow cooling heat treatment10.1016/j.jmatprotec.2022.117595 ↗
16. Effect of friction pressure on joining phenomena of friction welds between pure titanium and pure copper10.1179/1362171811Y.0000000009 ↗
17. Forming and tensile fracture characteristics of Ti-6Al-4V and T2 Cu vacuum electron beam welded joints10.1016/j.vacuum.2019.04.018 ↗
18. A review on dissimilar laser welding of steel-copper, steel-aluminum, aluminum-copper, and steel-nickel for electric vehicle battery manufacturing10.1016/j.optlastec.2021.107595 ↗
19. Laser material processing10.1179/1743280411Y.0000000003 ↗
20. Microstructure and properties of Cu/Ti laser welded joints10.1016/j.jmatprotec.2018.03.001 ↗
21. Bond strength optimization of Ti/Cu/Ti clad composites produced by roll-bonding10.1016/j.matdes.2015.05.010 ↗
22. Study on strengthening mechanism of Ti/Cu electron beam welding10.1016/j.matdes.2017.02.054 ↗
23. Designing of a thin Mo diffusion barrier towards strong and reliable Ti/Cu dissimilar brazing
24. Effect of Cu66V34 filler thickness on the microstructure and properties of titanium/copper joint by electron beam welding10.1016/j.jmatprotec.2018.12.013 ↗
25. Laser welding of Ti6Al4V to Cu using a niobium interlayer10.1016/j.jmatprotec.2019.03.005 ↗
26. Nickel interlayer on the microstructure and property of TC6 to copper alloy diffusion bonding10.1080/01694243.2018.1429860 ↗
27. Effect of welding parameters on spatter formation in full-penetration laser welding of titanium alloys10.1016/j.jmrt.2021.11.006 ↗
28. Investigation and in situ removal of spatter generated during laser ablation of aluminium composites10.1016/j.apsusc.2016.03.031 ↗
29. Cu-Ti binary phase diagram evaluation
30. The microstructures and mechanical properties of dissimilar laser welding of copper and 316L stainless steel with Ni interlayer10.1016/j.cryogenics.2021.103344 ↗
31. Effect of interlayer thickness on microstructure and mechanical properties of as welded Ti6Al4V/Cu/NiTi joints10.1016/j.matlet.2014.06.141 ↗
32. First-principles investigation of structural, mechanical and electronic properties for Cu–Ti intermetallics10.1016/j.commatsci.2016.06.015 ↗
33. Interface behavior and mechanical properties of Ti/Cu dissimilar metals welding by electron beam
34. Ni-Ti binary phase diagram evaluation
35. The Cu-Ni-Ti (copper-nickel-titanium) system10.1361/105497102770331299 ↗
36. Effect of laser positioning on the microstructure and properties of NiTi-copper dissimilar laser welds10.1007/s11665-020-04637-9 ↗
37. The effect of Cu addition on the hot deformation behavior of NiTi shape memory alloys10.1016/j.jallcom.2010.01.124 ↗
38. Laser welding of TiNi shape memory alloy and stainless steel using Ni interlayer10.1016/j.matdes.2012.02.031 ↗
39. Dissimilar laser welding of NiTi shape memory alloy and copper10.1088/0964-1726/24/12/125036 ↗
40. Macrosegregation in dissimilar-metal fusion welding10.1016/j.actamat.2016.03.004 ↗
41. Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 707510.1038/s41467-018-07989-y ↗
42. The substitution of Cu for Ni in NiTi shape memory alloys10.1007/BF02658353 ↗
43. Towards a better understanding of the phase transformations in explosively welded copper to titanium sheets10.1016/j.msea.2020.139285 ↗
44. Microstructure and properties of the interfacial region in explosively welded and post-annealed titanium-copper sheets10.1016/j.matchar.2020.110520 ↗
45. The interfacial reactions of infrared brazing Cu and Ti with two silver-based braze alloys10.1016/j.jallcom.2003.09.155 ↗
46. Microstructural characteristics of a stainless steel/copper dissimilar joint made by laser welding10.1007/s11661-013-1693-z ↗
47. Microstructures and properties of titanium–copper lap welded joints by cold metal transfer technology10.1016/j.matdes.2013.06.030 ↗
48. A model for estimating penetration depth of laser welding processes10.1088/0022-3727/29/7/018 ↗
49. Interface microstructure and mechanical properties of laser welding copper–steel dissimilar joint10.1016/j.optlaseng.2009.02.004 ↗
50. Microstructure and tensile behavior of laser arc hybrid welded dissimilar Al and Ti alloys10.3390/ma7031590 ↗
51. Laser keyhole welding of dissimilar Ti-6Al-4V titanium alloy to AZ31B magnesium alloy10.1007/s11661-011-0825-6 ↗
52. Influence of processing parameters on the characteristics of stainless steel/copper laser welding10.1016/j.jmatprotec.2015.03.003 ↗
53. TiB2 nanoparticles-regulated oxidation behavior in aluminum alloy 707510.1016/j.corsci.2021.109749 ↗
54. Enhanced thermal stability in Cu-40 wt% Zn/WC nanocomposite[J]10.1016/j.matdes.2019.107964 ↗