Experimental investigation of microstructural, mechanical and corrosion properties of 316L and 202 austenitic stainless steel joints using cold metal transfer welding
Source abstract
Abstract
The objective of the current experimental study is to investigate influence of dissimilar welding between 316 L Austenitic and 202 Austenitic Stainless Steel. This is achieved through the utilization of Cold Metal Transfer (CMT) Welding in conjunction with the GTAW mode. Various welding approaches are employed, including the use of ER316L and ER309L fillers, as well as a no-filler (autogenous) welding technique. Microstructural observation shows martensitic formation in the interface region. The tensile test was conducted by using Universal Testing Machine for the weldment and found that ER316L filler (721 MPa) has higher strength than ER309L (672 MPa) and autogenous weld (528 MPa). Charpy impact test was used to determine toughness of the weldment and found that ER309L Filler weld has toughness (87 J) which is higher than ER316L filler weld (5 4 J) and autogenous weld (23 J). Vicker's hardness test shows that autogenous weld hardness (avg. 193.34 HV) which is highest than ER309L filler (avg.188 HV) and ER316L filler weld (avg. 184.67 HV). The intergranular corrosion test by double loop electrochemical potentiokinetic reactivation (DLEPR) test shows sensitization at highest degree for autogenous weld (18.25 %) than ER316L filler weld (9.22 %) and ER309L filler weld (7.28 %).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A comparative study on the effect of electrode on microstructure and mechanical properties of dissimilar welds of 2205 austeno-ferritic and 316L austenitic stainless steel10.2320/matertrans.M2015321 ↗
2. Microstructural, mechanical and corrosion behaviour of dissimilar welding of Cr-Mn ASS and AISI 304 ASS by using 316L electrode10.1016/j.matpr.2017.11.522 ↗
3. Dissimilar welding of austenitic SS and ferritic SS in last decades10.1016/j.matpr.2023.04.533 ↗
4. Effect of environmental condition on corrosion susceptibility of GTA welded AISI 202 austenitic stainless steel10.1016/j.matpr.2022.05.593 ↗
5. Effect of number of welding passes on the microstructure, mechanical and intergranular corrosion properties of 409M ferritic stainless steel10.1108/WJE-11-2020-0591 ↗
6. Minimizing distortion in multi-pass GTAW welding of SS316L structures: a Taguchi approach
7. Effect of filler and autogenous welding on microstructure, mechanical and corrosion properties of low nickel Cr-Mn ASS
8. New CMT arc welding process – welding of steel to aluminium dissimilar metals and welding of super-thin aluminium sheets10.1533/wint.2006.3598 ↗
9. Effects of welding current and torch position parameters on minimizing the weld porosity of zinc-coated steel10.1007/s00170-017-1180-6 ↗
10. Comparative tests of steel car body sheet welds made using CMT and MIG/MAG methods10.1080/09507116.2011.606147 ↗
11. Microstructures and mechanical properties of Ni/Fe dissimilar butt joint welded using the cold metal transfer10.1088/2053-1591/ab8843 ↗
12. Weld overlay coating of Inconel 617 M on type 316 L stainless steel by cold metal transfer process10.1016/j.surfcoat.2018.10.073 ↗
13. Effect of cold metal transfer and gas tungsten arc welding processes on the metallurgical and mechanical properties of Inconel® 625 weldings10.1007/s40194-018-0661-z ↗
14. Yacob · 2014
15. Parametric optimization of cold metal transfer welding process on AISI 202 austenitic stainless steel
16. Vashishtha · 2014
17. Application of ANN and taguchi technique for material removal rate by abrasive jet machining with special abrasive materials
18. Effects of laser shock peening on the mechanisms of fatigue short crack initiation and propagation of AA7075-T65110.1016/j.ijfatigue.2020.106025 ↗
19. Double loop electrochemical potentiokinetic reactivation test optimization in checking of duplex stainless steel intergranular corrosion susceptibility10.1007/s11661-004-0187-4 ↗
20. Intergranular corrosion behavior of low-nickel and 304 austenitic stainless steels10.1007/s11665-016-2221-2 ↗
21. Microstructure and toughness of simulated heat-affected zone of laser welded joint for 960 MPa grade high strength steel10.1007/s11665-014-1137-y ↗
22. Effect of continuous and pulsed current on the metallurgical and mechanical properties of gas tungsten arc welded AISI 4340 aeronautical and AISI 304 L austenitic stainless steel dissimilar joints10.1590/1516-1439.269714 ↗
23. Advanced chromium carbide-based hardfacings10.1016/j.surfcoat.2012.04.039 ↗
24. El énfasis de las transformaciones de fase Y los constituyentes de La aleación AAn La susceptibilidad del agrietamiento En caliente de las soldaduras de acero Inoxidable tipo 304L Y 316L
25. Effect of fillers and autogenous welding on dissimilar welded 316L austenitic and 430 ferritic stainless steels10.1007/s11665-020-05395-4 ↗
26. Microstructure and grain boundary engineering of a novel Fe-Cr-Ni alloy weldment made with self-developed composition-matched weld filler metal10.1016/S1003-6326(20)65271-2 ↗
27. Effect of filler wire composition on joining properties of GTAW stainless steel 202
28. Effect of delta ferrite on the mechanical properties of dissimilar ferritic-austenitic stainless steel welds
29. Effect of heat on microstructural, mechanical and electrochemical evaluation of tungsten inert gas welding of low-nickel ASS10.1108/ACMM-05-2018-1941 ↗
30. Shielded metal arc welding of AISI 409M ferritic stainless steel: study on mechanical, intergranular corrosion properties and microstructure analysis10.1108/WJE-03-2021-0146 ↗
31. A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application10.1016/j.jmapro.2020.08.019 ↗
32. Effect of GTAW remelting on the corrosion performance of AISI 316L cladding10.1002/maco.202011666 ↗
33. Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless steel weldments—a review10.1016/j.jmapro.2016.11.003 ↗