journal article·2023-11Open access

Hybrid manufacturing of AlSi10Mg metamaterials: Process, static and impact response attributes

Agyapal Singh, Oraib Al-Ketan, Nikolaos Karathanasopoulos

Abstract

The work investigates the microstructural, static and impact mechanical attributes of hybrid-cast aluminum AlSi10Mg metamaterials. For the analysis, different metamaterial topologies, namely BCC, IWP and gyroid-based architectures, are considered. The microstructural characteristics of hybrid-cast metamaterials are thoroughly investigated, assessing their attributes through scanning electron microscopy (SEM) and CT-scanning methods. Moreover, their static and impact attributes are experimentally characterized, quantifying elastic and post-elastic properties, while associating the performance of hybrid-cast and as-built, powder bed fusion (PBF) based metamaterials. PBF samples yield overall superior Young's moduli and higher peak stresses, though upon a brittle post-elastic response. Contrariwise, hybrid-cast metamaterials result in a ductile post-elastic, continuum-type plastification performance with a considerable energy absorption capacity that depends on the metamaterial topology, aspects both experimentally and numerically elaborated. Under dynamic impact loading, substantial peak stress and toughness enhancement are recorded for the hybrid-cast specimens. The analysis furnishes process-structure-property benchmark data on the mechanical performance of advanced, hybrid-cast metamaterial topologies for the first time. We aspire that the provided results foster novel pathways in the engineering of advanced media for a variety of base materials beyond the aluminum alloy investigated here.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Properties and applications of additively manufactured metallic cellular materials: a review10.1016/j.pmatsci.2021.100918 ↗
2. Mechanical metamaterials and their engineering applications10.1002/adem.201800864 ↗
3. Multifunctional mechanical metamaterials based on triply periodic minimal surface lattices10.1002/adem.201900524 ↗
4. Optimizing the specific mechanical properties of lattice structures fabricated by material extrusion additive manufacturing10.1016/j.jmrt.2022.12.024 ↗
5. Additive manufacturing of metallic lattice structures: unconstrained design, accurate fabrication, fascinated performances, and challenges10.1016/j.mser.2021.100648 ↗
6. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗
7. Ultralight metallic microlattices10.1126/science.1211649 ↗
8. Review of defects in lattice structures manufactured by powder bed fusion10.1007/s00170-019-04753-4 ↗
9. The effect of induction heating power on the microstructural and physical properties of investment cast ASTM-F75 CoCrMo alloy10.1016/j.jmrt.2019.07.052 ↗
10. Analyzing the influence of the investment casting process parameters on microstructure and mechanical properties of open-pore Al–7Si foams10.1016/j.jmrt.2023.01.167 ↗
11. Mechanical behavior of three-dimensional pyramidal aluminum lattice materials10.1016/j.msea.2017.04.053 ↗
12. Compressive property of Al-based auxetic lattice structures fabricated by 3-D printing combined with investment casting10.1016/j.msea.2018.02.105 ↗
13. Application of stereolithography based 3D printing technology in investment casting10.3390/mi11100946 ↗
14. Analysis and design of lattice structures for rapid-investment casting10.3390/ma14174867 ↗
15. Energy absorption capability of graded and non-graded sheet-based gyroid structures fabricated by microcast processing10.1016/j.jmrt.2022.09.093 ↗
16. Magnesium stents manufacturing: experimental application of a novel hybrid thin-walled investment casting approach10.1016/j.jmatprotec.2021.117339 ↗
17. Investigating the surface roughness of implant prepared by combining fused deposition modeling and investment casting10.1177/0954408914557374 ↗
18. Investigations on dimensional accuracy of the components prepared by hybrid investment casting10.1016/j.jmapro.2015.07.008 ↗
19. Andrew · 2019
20. Design of honeycomb structures produced by investment casting10.24425/afe.2019.129633 ↗
21. Macro-, meso-and microstructural characterization of metallic lattice structures manufactured by additive manufacturing assisted investment casting10.1038/s41598-021-84524-y ↗
22. Additive manufacturing assisted investment casting: a low-cost method to fabricate periodic metallic cellular lattices
23. Enhanced compressive mechanical properties of aluminum based auxetic lattice structures filled with polymers10.1016/j.compositesb.2019.05.002 ↗
24. Thin-rib and high aspect ratio non-stochastic scaffolds by vacuum assisted investment casting
25. Mechanical attributes and wave propagation characteristics of TPMS lattice structures10.1016/j.mechmat.2022.104363 ↗
26. Towards biomimetic, lattice-based, tendon and ligament metamaterial designs10.1016/j.jmbbm.2022.105412 ↗
27. TPMS metamaterial structures based on shape memory polymers: mechanical, thermal and thermomechanical assessment10.1016/j.jmrt.2023.02.014 ↗
28. Strut and sheet metal lattices produced via AM-assisted casting and powder bed fusion: a comparative study
29. MSLattice: a free software for generating uniform and graded lattices based on triply periodic minimal surfaces
30. The effect of architecture on the mechanical properties of cellular structures based on the IWP minimal surface10.1557/jmr.2018.1 ↗
31. Geometrical control of lattice structures produced by EBM through chemical etching: investigations at the scale of individual struts10.1016/j.matdes.2016.08.029 ↗
32. Assessing the efficacy of several impact-based mechanical techniques on fatigue behavior of additive manufactured AlSi10Mg10.1016/j.msea.2023.144940 ↗
33. Effects of different mechanical and chemical surface post-treatments on mechanical and surface properties of as-built laser powder bed fusion AlSi10Mg10.1016/j.surfcoat.2022.128391 ↗
34. Fatigue performance of U-notched additively manufactured AlSi10Mg parts: the effects of chemical and thermal post-treatments
35. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development10.1016/j.matdes.2014.09.044 ↗
36. Improving the mechanical efficiency of electron beam melted titanium lattice structures by chemical etching
37. Effects of hot isostatic pressing and internal porosity on the performance of selective laser melted AlSi10Mg alloys10.1016/j.msea.2019.138713 ↗
38. Microstructural and mechanical optimization of selective laser melted Ti6Al4V lattices: effect of hot isostatic pressing10.1016/j.jmapro.2022.02.024 ↗
39. The effect of hot isostatic pressing (HIP) on the fatigue life of A206-T71 aluminum castings10.1016/j.msea.2007.02.009 ↗
40. Effect of heat treatment on ductility and precipitation size of additively manufactured AlSi10Mg10.3390/met12081311 ↗
41. Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading
42. Design and additive manufacturing of a modified face-centered cubic lattice with enhanced energy absorption capability10.1016/j.eml.2021.101358 ↗
43. Sheet and network based functionally graded lattice structures manufactured by selective laser melting: design, mechanical properties, and simulation10.1016/j.ijmecsci.2020.105480 ↗
44. A damage-tolerant, dual-scale, single-crystalline microlattice in the knobby starfish, Protoreaster nodosus10.1126/science.abj9472 ↗
45. Bio-inspired repeatable lattice structures for energy absorption: experimental and finite element study10.1016/j.compstruct.2021.115102 ↗
46. 3D printed polyurethane honeycombs for repeated tailored energy absorption10.1016/j.matdes.2016.08.062 ↗
47. Octagonal auxetic metamaterials with hyperelastic properties for large compressive deformation10.1016/j.ijmecsci.2018.06.040 ↗
48. A sinusoidal beam lattice structure with negative Poisson's ratio property
49. Mechanical properties and energy–absorption capabilities of thermoplastic sheet gyroid structures10.1080/15376494.2021.1919803 ↗
50. Additive manufacturing of metamaterials: a review