Investigating crack formation in IN738LC Ni-based superalloy fabricated by laser powder-bed fusion process
Source abstract
Abstract
Cracking is one of the most important challenges in the laser powder-bed fusion (LPBF) processing of high-γʹ nickel-based superalloys. In this work, crack susceptibility of the IN738LC superalloy fabricated by LPBF with different volume energy densities (VEDs) was investigated. It was observed that processing with medium VEDs (∼90 J/mm3) and higher scan speeds resulted in higher relative densities and lower defects. Cracks were mostly observed in grain boundaries with higher misorientation. Al oxide and MC carbides also were observed close to the crack area as stress concentration sites. Residual stress measurement using XRD also confirmed presence of tensile residual stresses in the as-built samples. Lower amount of residual stress in the sample associated with higher crack density was attributed to stress relaxation due to crack nucleation and growth. The majority of cracks in the IN738LC microstructure was found to be solidification cracks.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Developing a novel lightweight Al–Mg–Li alloy for laser powder bed fusion additive manufacturing: parameter optimization, microstructure evolution, and mechanical performance10.1016/j.msea.2023.144992 ↗
2. Solidification microstructure variations in additively manufactured Ti-6Al-4V using laser powder bed fusion10.1016/j.scriptamat.2023.115430 ↗
3. Experimental characterization and strengthening mechanism of process-structure-property of selective laser melted 316 L10.1016/j.matchar.2023.112753 ↗
4. New alloy design approach to inhibiting hot cracking in laser additive manufactured nickel-based superalloys10.1016/j.actamat.2023.118736 ↗
5. Effects of recrystallization on tensile anisotropic properties for IN738LC fabricated by laser powder bed fusion10.3390/cryst12060842 ↗
6. A microstructure-based creep model for additively manufactured nickel-based superalloys10.1016/j.actamat.2021.117528 ↗
7. Alloy in738 technical datasheet. Int Nickel Co n.d.
8. Boyraz · 2018
9. Effect of carbon content on the microstructure, tensile properties and cracking susceptibility of IN738 superalloy processed by laser powder bed fusion
10. Towards creep property improvement of selective laser melted Ni-based superalloy IN738LC10.1016/j.jmst.2021.09.050 ↗
11. Optimizing laser powder bed fusion parameters for IN-738lc by response surface method10.3390/ma13214879 ↗
12. Selective laser melting of the hard-to-weld IN738LC superalloy: efforts to mitigate defects and the resultant microstructural and mechanical properties10.1016/j.jallcom.2019.151662 ↗
13. The limit of hot isostatic pressing for healing cracks present in an additively manufactured nickel superalloy10.1016/j.jmatprotec.2021.117398 ↗
14. Selective laser melting of IN738 superalloy with a low Mn+ Si content: effect of energy input on characteristics of molten pool, metallurgical defects, microstructures and mechanical properties
15. Processing a non-weldable nickel-base superalloy by Selective Laser Melting: role of the shape and size of the melt pools on solidification cracking10.1016/j.mtla.2020.100686 ↗
16. DuPont · 2009
17. Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles10.1016/j.matdes.2015.10.027 ↗
18. Processability of different IN738LC powder batches by selective laser melting10.1016/j.jmatprotec.2015.09.046 ↗
19. The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy10.1016/j.jallcom.2018.03.366 ↗
20. Focus shift analysis, to manufacture dense and crack-free SLM-processed CM247LC samples10.1016/j.jmatprotec.2020.116948 ↗
21. Inhibition of cracking by grain boundary modification in a non-weldable nickel-based superalloy processed by laser powder bed fusion10.1016/j.msea.2020.139745 ↗
22. A comparing study of defect generation in IN738LC superalloy fabricated by laser powder bed fusion: continuous-wave mode versus pulsed-wave mode10.1016/j.jmst.2021.03.006 ↗
23. Effect of Zr content on crack formation and mechanical properties of IN738LC processed by selective laser melting10.1016/S1003-6326(21)65582-6 ↗
24. Engeli · 2015
25. On the oxygen-induced hot cracking in a direct laser deposited Ni-based superalloy10.1016/j.scriptamat.2021.113751 ↗
26. On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting10.1016/j.matchar.2018.12.032 ↗
27. Metastable carbides and their impact on recrystallisation in IN738LC processed by selective laser melting
28. Chapter 8 - application and prospects
29. On selective laser melting of Inconel 718: densification, surface roughness, and residual stresses10.1016/j.matdes.2020.108818 ↗
30. Grain refinement and crack inhibition of hard-to-weld Inconel 738 alloy by altering the scanning strategy during selective laser melting10.1016/j.matdes.2021.109940 ↗
31. The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting10.1016/j.matdes.2014.06.022 ↗
32. Single-track investigation of IN738LC superalloy fabricated by laser powder bed fusion: track morphology, bead characteristics and part quality10.1016/j.jmatprotec.2020.117000 ↗
33. On the strengthening and embrittlement mechanisms of an additively manufactured Nickel-base superalloy10.1016/j.mtla.2020.100657 ↗
34. Effect of processing parameters on surface roughness, porosity and cracking of as-built IN738LC parts fabricated by laser powder bed fusion10.1016/j.jmatprotec.2020.116788 ↗
35. Grain growth during keyhole mode pulsed laser powder bed fusion of IN738LC10.1007/s11837-020-04012-y ↗
36. Microstructure formed during selective laser melting of IN738LC in keyhole mode10.1016/j.jallcom.2019.03.419 ↗
37. Optimisation of selective laser melting parameters for the Ni-based superalloy IN-738 LC using Doehlert's design10.1108/RPJ-04-2016-0063 ↗
38. Engeli · 2017
39. Review of selective laser melting: materials and applications10.1063/1.4935926 ↗
40. Risse · 2019
41. Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)10.1016/j.msea.2014.10.003 ↗
42. Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies10.1016/j.msea.2016.03.036 ↗
43. Effect of post heat-treatment on the microstructure and high-temperature oxidation behavior of precipitation hardened IN738LC superalloy fabricated by selective laser melting10.1016/j.jmst.2020.11.013 ↗
44. Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting10.1016/j.msea.2016.01.058 ↗
45. High temperature material properties of IN738LC processed by selective laser melting (SLM) technology10.1108/13552541311323281 ↗
46. Microstructure evolution, phase transformation and mechanical properties of IN738 superalloy fabricated by selective laser melting under different heat treatments10.1016/j.msea.2022.142947 ↗
47. Improving high-temperature mechanical properties of laser powder bed-fused Inconel 738 alloy by hot isostatic pressing: tailoring precipitates and healing defects
48. Influence of cooling rate on the solidification behavior and microstructure of IN738LC superalloy10.1016/j.jallcom.2016.04.099 ↗
49. Investigation of microstructure-tensile behavior relationship in Hastelloy X Ni-based superalloy processed by laser powder-bed fusion: insights into the elevated temperature ductility loss10.1016/j.msea.2021.141742 ↗
50. The effect of Hf on solidification cracking inhibition of IN738LC processed by Selective Laser Melting10.1016/j.msea.2021.140733 ↗
51. Investigation of dendritic growth and liquation cracking in laser melting deposited Inconel 718 at different laser input angles10.1016/j.matdes.2016.05.034 ↗
52. Liquation cracking in the heat-affected zone of IN738 superalloy weld10.3390/met8060387 ↗
53. Two-step heat treatment for laser powder bed fusion of a nickel-based superalloy with simultaneously enhanced tensile strength and ductility
54. Short-term creep behavior of an additive manufactured non-weldable Nickel-base superalloy evaluated by slow strain rate testing10.1016/j.actamat.2019.08.034 ↗
55. Effect of building direction on anisotropy of mechanical properties of GH4169 alloy fabricated by laser powder bed fusion10.1016/j.msea.2022.144430 ↗
56. Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting10.1016/j.actamat.2017.09.047 ↗
57. Fitzpatrick · 2005
58. Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy10.1016/j.matdes.2019.107793 ↗