journal article·2024-03Open access

Strengthening mechanism based on dislocation-twin interaction under room temperature multi-directional forging of AZ80 Mg alloy

Zhuo Wang, Xi Zhao, Shuchang Li, Jianmin Yu

Abstract

Twin and dislocation have critical influence on the mechanical properties of the widely used AZ80 magnesium alloy. In the present work, we designed room temperature multi-direction forging (MDF) at different strain amplitudes (3% and 6%) with a same strain, introduced twin and dislocation structures and improved the mechanical properties of the alloy. The results showed that the material reached the limit of deformation with a cumulative strain of 0.72. With the increase of strain, the grain size decreased and the dislocation density increased gradually. At low strain amplitude, the transformation of dislocations at twin boundaries (TBs) caused twinning expansion and detwinning. While at high strain amplitude, interactive twin structure hindered the over-expansion of twins. In addition, high-density dislocations accumulate at the twin boundaries, which stimulates the nucleation of twin variants and further refines the grains. In the process of plastic deformation, dislocation strengthening contributed the main yield strength, and fine twins provided a certain level of hardening ability. Through the interaction between the dislocations and twins, the strength and plasticity of the material were synergistically improved, and excellent mechanical properties with ultimate tensile strength of 486 MPa, yield strength of 385 MPa, and elongation of 8.1% were finally obtained.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Research advances of magnesium alloys worldwide in 202110.1016/j.jma.2022.04.001 ↗
2. Advanced hydrogen storage of the Mg-Na-Al system: a review10.1016/j.jma.2021.03.031 ↗
3. Surface characterization and corrosion behavior of calcium phosphate (Ca-P) base composite layer on Mg and its alloys using plasma electrolytic oxidation (PEO): a review10.1016/j.jma.2020.07.004 ↗
4. Micro and nano-enabled approaches to improve the performance of plasma electrolytic oxidation coated magnesium alloys10.1016/j.jma.2020.11.004 ↗
5. Progress in twin roll casting of magnesium alloys: a review10.1016/j.jma.2020.10.003 ↗
6. Thermodynamics and kinetics of hydriding dehydriding reactions in Mg-based hydrogen storage materials10.1016/j.jma.2021.10.002 ↗
7. Influence of indentation size on the corrosion behaviour of a phosphate conversion coated AZ80 magnesium alloy10.1016/j.jmrt.2021.07.091 ↗
8. Post deformation analysis of ballistic impacted magnesium alloys, a short-review10.1016/j.jma.2020.07.011 ↗
9. Improving the wear resistance of plasma electrolytic oxidation (PEO) coating applied on Mg and its alloys under the addition of nano- and micro-size additives into the electrolytes: a review10.1016/j.jma.2020.11.016 ↗
10. Magnesium matrix composite reinforced by nanoparticles – a review10.1016/j.jma.2020.08.018 ↗
11. Recent developments on corrosion behaviors of Mg alloys with stacking fault or long period stacking ordered structures10.1016/j.jma.2020.09.021 ↗
12. Recent progress in superhydrophobic coating on Mg alloys: a general review10.1016/j.jma.2020.08.024 ↗
13. Recent progress in in vivo studies and clinical applications of magnesium based biodegradable implants – a review10.1016/j.jma.2020.11.001 ↗
14. Room-temperature multi-directional forging of AZ80 Mg alloy to induce ultrafine grained structure and specific mechanical properties10.1016/j.proeng.2014.10.035 ↗
15. Effect of Mn addition on microstructure, texture and mechanical properties of Mg-Zn-Ca alloy by grain refinement10.1016/j.msea.2011.01.037 ↗
16. Formation and mechanical properties of Mg97Zn1RE2 alloys with long-period stacking ordered structure10.2320/matertrans.MER2007142 ↗
17. Effects of forging progressing on the texture and tensile properties of ECAEed AZ80 Magnesium alloy10.1016/j.msea.2012.03.036 ↗
18. Microstructure and mechanical properties of multi-directionally forged Mg-Al-Zn alloy10.1016/j.scriptamat.2011.10.005 ↗
19. Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAP10.1016/j.msea.2016.06.031 ↗
20. Microstructure evolution and mechanical properties of AZ80 magnesium alloy during high-pass multi-directional forging10.1016/j.rinp.2018.08.028 ↗
21. Fabrication of high-strength AZ80 alloys via multidirectional forging in air with no need of ageing treatment10.1016/j.jallcom.2019.02.133 ↗
22. Enhanced precipitation strengthening of extruded Mg-8 wt.%Al-0.5 wt.%Zn (AZ80) magnesium alloy by extension twinning
23. Microstructure and mechanical properties of plates warm extruded AZ80Mg alloy fabricated by multi-direction forging in advance10.1016/j.promfg.2018.07.324 ↗
24. The microstructure evolution, texture weakening mechanism and mechanical properties of AZ80 Mg alloy processed by repetitive upsetting-extrusion with reduced deformation temperature
25. Microstructural evolution and anisotropic weakening mechanism of ZK60 magnesium alloy processed by isothermal repetitive upsetting extrusion10.1007/s40195-021-01293-3 ↗
26. Influence of heat treatment on precipitation behavior and mechanical properties of extruded AZ80 magnesium alloy10.1007/s40195-020-01094-0 ↗
27. Comparisons of microstructure homogeneity, texture and mechanical properties of AZ80 magnesium alloy fabricated by annular channel angular extrusion and backward extrusion10.1016/j.jma.2020.05.010 ↗
28. High strength and excellent ductility of AZ80 magnesium alloy cabin component developed by W-shaped channel extrusion and subsequent T6 heat treatment
29. The development of a W-shaped channel extrusion for fabricating magnesium alloy shells by combining high amplitude shear strain with a shorter process10.1016/j.jmrt.2023.06.085 ↗
30. Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins10.1038/s41467-021-24939-3 ↗
31. Ultra strength-ductility synergy in the Mg-Al-Zn alloy via densely dispersed multi-scale {102} tension twins
32. Effect of untwined and {102} twinned lamellar structure on mechanical properties of Mg alloys10.3724/SP.J.1037.2012.00582 ↗
33. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray Debye Scherrer spectrum10.1080/14786435608238074 ↗
34. Estimating grain-size distributions in nanocrystalline materials from X-ray diffraction profile analysis10.1080/01418619808224072 ↗
35. Twinning and de-twinning via glide and climb of twinning dislocations along serrated coherent twin boundaries in hexagonal-close-packed metals10.1080/21663831.2013.779601 ↗
36. Twinning dislocation multiplication at a coherent twin boundary10.1016/j.actamat.2011.06.007 ↗
37. The effect of twinning and detwinning on the mechanical property of AZ31 extruded magnesium alloy during strain-path changes10.1016/j.matdes.2014.05.056 ↗
38. The effects of compressive pre-deformation on yield asymmetry in hot-extruded Mg-3Al-1Zn alloy10.1016/j.msea.2013.04.115 ↗
39. The effect of twin–twin interactions on the nucleation and propagation of {102} twinning in magnesium10.1016/j.actamat.2013.02.030 ↗
40. An analytical approach and experimental confirmation of dislocation–twin boundary interactions in titanium10.1007/s10853-013-7284-y ↗
41. Twinning-like lattice reorientation without a crystallographic twinning plane
42. Strain-induced grain refinement of cobalt during surface mechanical attrition treatment10.1016/j.actamat.2004.10.021 ↗
43. Reducing the tension-compression yield asymmetry in a hot-rolled Mg–3Al–1Zn alloy via multidirectional pre-compression10.1016/j.msea.2012.11.127 ↗
44. Role of {10-12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy10.1016/j.actamat.2010.07.002 ↗
45. Twin solute, twin dislocation and twin-twin interactions in magnesium10.1016/j.jma.2023.07.015 ↗
46. The plastic deformation of polycrystalline aggregates10.1080/14786436208201857 ↗
47. The mechanism for the high dependence of the Hall-Petch slope for twinning/slip on texture in Mg alloys10.1016/j.actamat.2017.02.044 ↗
48. Dislocation plasticity reigns in a traditional twinning-induced plasticity steel by in situ observation10.1016/j.mtnano.2018.11.004 ↗
49. Dislocation transmutation by tension twinning in magnesium alloy AZ3110.1016/j.ijplas.2016.01.012 ↗
50. Profuse slip transmission across twin boundaries in magnesium10.1016/j.actamat.2016.11.022 ↗
51. Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn10.1016/j.actamat.2004.07.015 ↗
52. Role of {10-12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy10.1016/j.actamat.2010.07.002 ↗
53. A crystal plasticity theory for latent hardening by glide twinning through dislocation transmutation and twin accommodation effects10.1016/j.jmps.2009.12.004 ↗
54. An experimental and numerical study of texture change and twinning-induced hardening during tensile deformation of an AZ31 magnesium alloy rolled plate10.1016/j.msea.2012.11.018 ↗
55. Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet10.1016/j.msea.2007.09.069 ↗
56. Twinning effects in a rod-textured AM30 Magnesium alloy10.1016/j.ijplas.2011.08.001 ↗