journal article·2024-05Open access

Morphological, chemical and mechanical properties of hybrid polyester composites reinforced with bamboo fibers and kaolin waste

Alessandro J.G. dos Santos, Mauricio M. Ribeiro, Alessandro de C. Corrêa, Jean da S. Rodrigues, Douglas S. Silva, Raí F.P. Junio, Sergio N. Monteiro

Abstract

This article presents a study on the use of natural fibers and kaolin waste as sustainable alternatives in the manufacture of polymer matrix composites. In the present research, isophthalic unsaturated polyester matrix composites were manufactured in association with bamboo fibers (Bambusa vulgaris) and kaolin waste. The kaolin waste was used with a particle size of 50–100 MESH and the fibers in lengths of 15 mm and 30 mm, randomly arranged within the matrix. Bamboo fibers were used fresh and treated with NaOH (5%/2 h). The chemical characterization of the fibers was obtained followed by the morphological characterization using Scanning Electron Microscopy (SEM). The composites were mechanically evaluated through flexural and tensile tests. The mechanical properties obtained were treated by analysis of variance (ANOVA) and Tukey test. The fracture surfaces of the composites were verified by SEM. Bamboo fibers had a chemical composition similar to other natural fibers already studied, with 7.55% extractives, 17.95% total lignin and 74.5% holocellulose. Composites with 30 mm long treated fibers and 30% kaolin showed better flexural strength (137.0 MPa), with deformation of (1.59 mm) and flexural modulus of (19.27 GPa). Through tensile tests, it was possible to identify that the addition of kaolin waste provided a significant improvement in tensile strength of 66% (15BTKW20) and 54% (30BTKW20) compared to neat polyester. SEM micrographs of bamboo fibers, surface roughness, starch granules, micropores and parenchyma cells were identified. ANOVA reinforced the reliability of the results, highlighting the feasibility of manufacturing kaolin waste/bamboo fiber hybrid composites.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (94)

Show source-provided references
1. Fabrication of 3D structures via direct ink writing of kaolin/graphene oxide composite suspensions at ambient temperature10.1016/j.ceramint.2019.06.136 ↗
2. Investigation of gamma shielding and liquid permeability properties of kaolin for liquid radioactive waste management
3. Traditional and new applications for kaolin, smectite, and palygorskite: a general overview10.1016/S0169-1317(00)00016-8 ↗
4. Immobilization of radioactive waste by cementation with purified kaolin clay10.1016/S0956-053X(02)00036-3 ↗
5. Effect of beneficiation on the characterization of getso kaolin
6. Composite resins for 3D printing of corundum and corundum-kaolin based monoliths for catalytic applications10.1016/j.ceramint.2022.09.155 ↗
7. Fabrication and thermal characterization of kaolin-based composite phase change materials for latent heat storage in buildings10.1016/j.enbuild.2015.03.022 ↗
8. Compressive strength and microstructure analysis of geopolymer paste using waste glass powder and fly ash10.1016/j.jclepro.2017.11.125 ↗
9. Sustainable rehabilitation of mining waste and acid mine drainage using geochemistry, mine type, mineralogy, texture, ore extraction and climate knowledge10.1016/j.jenvman.2015.04.045 ↗
10. Bioleaching of Manganese from mining waste materials10.1016/j.matpr.2017.11.459 ↗
11. Development and sustainability of industrial waste-based red mud hybrid composites10.1016/j.jclepro.2019.05.131 ↗
12. Hybrid composites: a versatile materials for future10.14416/j.asep.2019.09.002 ↗
13. A novel process to improve yield and mechanical performance of bamboo fiber reinforced composite via mechanical treatments10.1016/j.compositesb.2013.08.007 ↗
14. Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber10.1016/j.conbuildmat.2017.09.185 ↗
15. Fiber reinforced biopolymer composites: a review
16. Utilizing Malaysian bamboo for use in thermoplastic composites10.1016/j.jclepro.2015.03.052 ↗
17. Recent developments in bamboo fiber-based composites: a review10.1007/s00289-018-2493-9 ↗
18. Bamboo-fiber-reinforced thermoset and thermoplastic polymer composites: a review of properties, fabrication, and potential applications10.3390/polym14071387 ↗
19. Mechanical properties of bamboo fiber-reinforced polymer composites: a review of recent case studies10.1007/s10853-021-06854-6 ↗
20. Mechanical performance evaluation of bamboo fibre reinforced polymer composites and its applications: a review
21. Processing of hybrid polymer composites - a review
22. Tensile properties of curaua–aramid hybrid laminated composites for ballistic helmet10.3390/polym14132588 ↗
23. Hybridization effect of cellulose paper and postcuring conditions on the mechanical properties of flax fiber reinforced epoxy biocomposite
24. Development and characterization of microstructural and mechanical properties of hybrid polystyrene composites filled with kaolin and expanded polyethylene powder
25. Microstructural and thermal properties of thermally cured calcined cow bone/kaolin filled hybrid polystyrene composites10.1002/apj.2898 ↗
26. Influence of the addition chestnut shell to kaolin/polyester composites
27. Evalution the mechanical properties of kaolin particulate reinforced epoxy composites10.22153/kej.2018.08.003 ↗
28. Effect of TiO2 and nanoclay on the properties of wood polymer nanocomposite10.1007/s00289-012-0799-6 ↗
29. Hybrid polyester composites reinforced with curauá fibres and nanoclays10.1007/s12221-020-9506-7 ↗
30. Antimicrobial effect of cotton fabric functionalized with a kaolinite-titania nano-hybrid composite
31. Preparation and thermo-mechanical characteristics of composites based on epoxy resin with kaolinite and clinoptilolite10.3390/polym15081898 ↗
32. Kaolin-embedded cellulose hydrogel with tunable properties as a green fire retardant
33. Green-composites: ecofriendly and sustainability10.14416/j.asep.2020.06.001 ↗
34. A review on lightweight materials for defence applications: present and future developments10.1016/j.dt.2023.02.025 ↗
35. 2004
36. Kaolin mining profile (technical report No. 39 of the technical assistance project for the energy sector - STATE project)
37. 2004
38. 2009 · vol. 52
39. Polymeric composites reinforced with natural fibers from Amazon manufactured by infusion
40. Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials
41. 2017
42. Two-body abrasive behaviour of untreated SC and R-G fibers polyester composites10.1016/j.wear.2008.06.018 ↗
43. Suitability of using coir fiber/polymeric composite for the design of liquid storage tanks10.1016/j.matdes.2011.01.063 ↗
44. Carnauba leaf fibers: correlation among diametrical variation, physical and mechanical properties10.1016/j.jmrt.2022.12.067 ↗
45. Morphological and structural characterization of bamboo fiber into culm-guadua angustifolia kunth caracterização morfológica e estrutural de fibras na colmo do bambu dentro de colmo-guadua angustifolia kunth10.5902/1980509835363 ↗
46. Zhang · 2014
47. Xu · 2006
48. Effect of alkali treatment on microstructure and mechanical properties of individual bamboo fibers10.1007/s10570-016-1116-6 ↗
49. Thermal andmechanical properties of bamboo fiber reinforced composites
50. Effect of alkali treatment on wettability and thermal stability of individual bamboo fibers10.1007/s10086-018-1713-0 ↗
51. Thermal and mechanical properties of bamboo fiber reinforced epoxy composites10.3390/polym10060608 ↗
52. Mechanical refining combined with chemical treatment for the processing of bamboo fibres to produce efficient cement composites
53. Wetting mechanism and interfacial bonding performance of bamboo fiber reinforced epoxy resin composites
54. The fracture toughness of bast fibre reinforced polyester composites Part 1 Evaluation and analysis10.1023/A:1020621020862 ↗
55. Development of a reinforced styrene-free unsaturated polyester composite based on bamboo fibers10.1515/hf-2018-0160 ↗
56. Fracture behaviour of bamboo fiber reinforced epoxy composites10.1016/j.compositesb.2017.02.015 ↗
57. Bamboo fibre reinforced biocomposites: a review10.1016/j.matdes.2012.06.015 ↗
58. Utilização de rejeito de caulim da Amazônia na síntese da zeólita A10.1590/S0366-69132007000300017 ↗
59. Influence of an aging step on the synthesis of zeolite NaA from Brazilian Amazon kaolin waste10.1016/j.jmrt.2019.02.021 ↗
60. Geopolymer-bamboo composite - a novel sustainable construction material10.1016/j.conbuildmat.2016.07.037 ↗
61. Fiber morphology, chemical composition, and properties of kraft pulping handsheet made from four Thailand bamboo species
62. Fiber characteristics and papermaking of seagrass using hand-beaten and blended pulp
63. Crystal structure of native cellulose10.1021/ma00013a035 ↗
64. Chemical composition, fiber morphology, and kraft pulping of bracken stalks (Pteridium aquilinum (L.) Kuhn)10.5552/drind.2018.1725 ↗
65. Preliminary study of anthraquinone in sweet bamboo (Dendrocalamus asper Backer) alkaline sulfite pulping
66. Cell wall chemistry
67. Identification of odorous constituents of bamboo during thermal treatment10.1016/j.conbuildmat.2019.01.054 ↗
68. Performance improvement of carbon fiber polyethylene fiber hybrid composites10.1023/A:1004647721380 ↗
69. Duca · 2005 · 221
70. Tensile properties of polypropylene/kaolin composites10.1002/app.1992.070440219 ↗
71. Mechanical, morphological, and thermal properties of polypropylene/kaolin composite. Part I. The effects of surface‐treated kaolin and processing enhancement10.1002/app.27950 ↗
72. Study on effect of filler loading on the flow and swelling behaviors of polypropylene‐kaolin composites using single‐screw extruder10.1002/app.32541 ↗
73. The surface energy of kaolinite10.1007/s00396-004-1150-z ↗
74. Surface free energy of polypropylene and polycarbonate solidifying at diferent solid surfaces10.1016/j.apsusc.2009.09.024 ↗
75. Tough and reinforced polypropylene/kaolin composites using modified kaolin,”10.1088/1757-899X/359/1/012034 ↗
76. Comparison of mechanical properties of carbon fibre and kaolin reinforced polypropylene composites10.11159/mmme21.301 ↗
77. Study of mechanical properties of carbon fiber reinforced polypropylene
78. Manufacturing of recycled carbon fiber reinforced polypropylene composites by high speed thermo‐kinetic mixing for lightweight applications10.1002/pc.24394 ↗
79. NA Mechanical properties of carbon fiber-reinforced polypropylene composites10.4028/www.scientific.net/KEM.471-472.652 ↗
80. Szpieg · 2011
81. Sjögren · 1995
82. Compatibilisation of polypropylene/ethylene propylene diene terpolymer/kaolin composites: the effect of maleic anhydride grafted-polypropylene
83. Tensile properties of polypropylene/kaolin composites10.1002/app.1992.070440219 ↗
84. Tensile and compressive properties of kaolin rienforced epoxy
85. An investigation of Kaolin influences on mechanical properties of unsaturated polyester composites
86. Characterization of epoxy–clay hybrid composite prepared by emulsion polymerization10.1002/(SICI)1097-4628(19980620)68:12<1997::AID-APP14>3.0.CO;2-P ↗
87. The effects of promoter and curing process on exfoliation behavior of epoxy/clay nanocomposites10.1002/1097-4628(20001024)78:4<808::AID-APP140>3.0.CO;2-9 ↗
88. Synthesis of epoxy–clay nanocomposites
89. Influence of alkali treatment and fiber length on mechanical properties of short Agave fiber reinforced epoxy composites10.1016/j.matdes.2011.04.029 ↗
90. Development of structural composite products made from bamboo II: fundamental properties of laminated bamboo lumber10.1007/BF01171228 ↗
91. Fracture characterization of short bamboo fiber reinforced polyester composites10.1016/j.matdes.2010.04.029 ↗
92. Effect of filler geometry on fracture mechanisms in glass particle filled epoxy composites10.1016/j.engfracmech.2016.03.034 ↗
93. The role of matrix cracks and fiber/matrix debonding on the stress transfer between fiber and matrix in a single fiber fragmentation test10.1016/j.compositesa.2011.09.005 ↗
94. Fracture toughness of natural fibers/castor oil polyurethane composites10.1016/j.compscitech.2005.10.012 ↗