journal article·2024-05Open access

Comparative study on corrosion property of 2219 aluminum alloy sheet and additively manufactured 2319 aluminum alloy

Feng Han, Chunyang Li, Yizhou Wang, Zula Pai, Yifan Meng, Mochu Cao, Yi Liu, Peng He, Xiaoyu Ma, Long Xue, Caimei Wang

Abstract

2319 aluminum alloy parts was prepared by wire arc additive manufacturing technology. The corrosion properties of additively manufactured 2319 aluminum alloy and 2219 aluminum alloy sheets were systematically investigated by electrochemical tests and localized corrosion tests. The results of electrochemical tests showed that the 2219 aluminum alloy sheet has a lower corrosion current density than the additively manufactured 2319 aluminum alloy. Localized corrosion test results indicated that the additively manufactured 2319 aluminum alloy exhibited a higher intergranular corrosion depth and more severe corrosion morphology than the 2219 aluminum alloy sheet. This suggests that the 2219 aluminum alloy sheet has higher corrosion resistance than the additively manufactured 2319 aluminum alloy. The poor corrosion resistance of additively manufactured 2319 aluminum alloy could be attributed to the formation of a coarse continuous Al2Cu phase along the grain boundary. Based on this, heat treatment was used to dissolve the Al2Cu, which can effectively improve the corrosion resistance of additively manufactured 2319 aluminum alloy to the same level as that of the 2219 aluminum alloy sheet.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Quantitative analysis of the solute redistribution and precipitate of Al-Mg-Si series alloys resistance spot welds after post-weld heat treatment10.1016/j.jmrt.2021.11.063 ↗
2. Effect of ultrasonic impact treatment on microstructure and corrosion behavior of friction stir welding joints of 2219 aluminum alloy10.1016/j.jmrt.2022.03.068 ↗
3. Microstructure and mechanical properties of wire arc additively manufactured 205A high strength aluminum alloy: the comparison of as-deposited and T6 heat-treated samples10.1016/j.matchar.2022.111990 ↗
4. Influence of travel speed on microstructure and mechanical properties of wire + arc additively manufactured 2219 aluminum alloy10.1016/j.jmst.2019.06.016 ↗
5. Additive manufacturing method and different welding applications10.1016/j.jmrt.2020.08.039 ↗
6. Research status of laser additive manufacturing for metal: a review10.1016/j.jmrt.2021.08.050 ↗
7. Friction stir-based additive manufacturing10.1080/13621718.2022.2027663 ↗
8. Wire laser arc additive manufacture of aluminium zinc alloys10.1007/s40194-020-00872-9 ↗
9. Joining of carbon fiber and aluminum using ultrasonic additive manufacturing (UAM)10.1016/j.compstruct.2018.10.004 ↗
10. Wire arc additive manufacturing Al-5.0 Mg alloy: Microstructures and phase composition10.1016/j.matchar.2022.111875 ↗
11. Research status of laser additive manufacturing for metal: a review10.1016/j.jmrt.2021.08.050 ↗
12. A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
13. Composition design of low hot-cracking susceptibility of Al-Zn-Mg-Sc alloy and its formability during laser additive manufacturing10.1016/j.matchar.2022.112304 ↗
14. A review of laser powder bed fusion additive manufacturing of aluminium alloys: microstructure and properties
15. A high-efficiency forming method of large- scale aluminum alloy components using fused deposition additive manufacturing based on multi-energy fields
16. Enhanced mechanical properties in nickel-aluminium bronze alloy via wire arc additive manufacturing with follow-weld forced cooling10.1016/j.matchar.2024.113653 ↗
17. Effect of placement configuration on the microstructure, porosity and mechanical performance of dissimilar remote laser welding of additive manufactured AlSi10Mg alloy and conventionally manufactured 1050 aluminium sheet10.1016/j.jmrt.2023.11.077 ↗
18. Printing high-strength high-elongation aluminum alloy using commercial ER2319 welding wires through deformation-based additive manufacturing10.1016/j.msea.2023.144773 ↗
19. Local microstructure evolution and mechanical performance of friction stir additive manufactured 2195 Al-Li alloy10.1016/j.matchar.2022.111818 ↗
20. Influence of arc mode on the microstructure and mechanical properties of 5356 aluminum alloy fabricated by wire arc additive manufacturing10.1016/j.jmrt.2022.08.005 ↗
21. Mechanical properties and precipitation behavior of the heat-treated wire + arc additively manufactured 2219 aluminum alloy10.1016/j.matchar.2020.110735 ↗
22. Influence of heat treatments on the corrosion mechanism of additive manufactured AlSi10Mg10.1016/j.corsci.2018.11.038 ↗
23. Microstructures and properties of wire-arc additively manufactured ultra-high strength aluminum alloy under different heat treatments10.1016/j.jmrt.2023.03.100 ↗
24. Effect of growth orientation and heat treatment on the corrosion properties of AlSi10Mg alloy produced by additive manufacturing10.1016/j.jmrt.2022.05.021 ↗
25. The effect of heat treatment on the microstructure and electrochemical corrosion behavior of multilayer AA6061 alloy fabricated by additive friction stir deposition10.1016/j.apsusc.2023.159167 ↗
26. Effect of post-heat treatment on the microstructure, mechanical, and corrosion properties of laser powder bed fused Al-Zn-Mg-Cu-Si-Zr-Er alloys10.1016/j.jmrt.2023.10.009 ↗
27. On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting10.1016/j.corsci.2018.08.019 ↗
28. Wear and corrosion of an additively-manufactured AlMgScZrMn alloy10.1016/j.matchar.2023.112829 ↗
29. An experimental investigation on microstructure, mechanical properties and corrosion performance of CMT-wire arc additively manufactured Al-4043 alloy10.1007/s12666-023-02965-7 ↗
30. Effect of direct aging treatment on microstructure, mechanical and corrosion properties of a Si-Zr-Er modified Al-Zn-Mg-Cu alloy prepared by selective laser melting technology10.1016/j.matchar.2022.112459 ↗
31. Influence of arc mode on the microstructure and mechanical properties of 5356 aluminum alloy fabricated by wire arc additive manufacturing10.1016/j.jmrt.2022.08.005 ↗
32. Microstructure and mechanical properties of Al-Zn-Mg-Cu alloy fabricated by wire + arc additive manufacturing10.1016/j.jmapro.2020.12.045 ↗
33. Effect of solid solution time on microstructure and corrosion property of wire arc additively manufactured 2319 aluminum alloy10.1016/j.jmrt.2023.08.098 ↗
34. Microstructure and properties of electron beam welded and post-welded 2219 aluminum alloy10.1179/mst.1996.12.4.323 ↗
35. Towards high-temperature applications of aluminum alloys enabled by additive manufacturing10.1080/09506608.2021.1951580 ↗
36. Intermetallic phases in aluminum alloys and their roles in localized corrosion10.1149/2.0931811jes ↗
37. Precipitation behavior and corrosion properties of friction stir welded AA5083 Al-Mg alloy after sensitization10.1016/j.matchar.2023.112782 ↗
38. Environmental factors affecting localized corrosion of 7075-T7351 aluminum alloy plate10.1007/BF02642428 ↗
39. Electrochemical quartz crystal microbalance study of corrosion of phases in AA202410.1149/1.1524172 ↗
40. Effect of friction stir repair welding on microstructure and corrosion properties of 2219-T8 Al alloy joints10.1016/j.matchar.2022.112634 ↗