journal article·2025-01Open access

Strengthened microstructure and mechanical properties of austenitic 316L stainless steels by grain refinement and solute segregation

Yurong Wang, Buwei Xiao, Xiaoyu Liang, Huabei Peng, Jun Zhou, Feng Lin

Abstract

Strengthening conventional materials through additive manufacturing is generally understood to occur due to rapid cooling in the metallurgical process, which refines the microstructure by producing smaller grain sizes and segregating elements at specific locations. However, the effectiveness of this enhancement mechanism for increasing strength or elongation of parts depends significantly on the nature of the material. For example, austenitic 316L stainless steel fabricated by laser powder bed fusion exhibits superior ductility but struggles to improve its strength. In order to explore the contribution of grain scales and solute segregation in the strengthening of rapid solidification microstructures during additive manufacturing, we investigate an austenitic 316L stainless steel micro-alloyed with Nb and Ti. The austenitic stainless steel is strengthened through grain size refinement and the presence of dislocation cell boundaries enriched with Nb/Cr phases, leading to yield and tensile strengths exceeding 0.8 GPa and 1.1 GPa, respectively. Its strength exceeds that of most current additively manufactured austenitic stainless steels. The strong ferrite-forming components (Nb and Ti) contribute significantly to the microstructural refinement of austenitic stainless steels, with the average grain size decreased by 65.4% compared to austenitic 316L stainless steel. Additionally, the fine grains exhibit predominantly high-angle grain boundaries, and the elevated density of solute segregation in these regions plays a crucial role in contributing to exceptional strength of materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. In situ design of advanced titanium alloy with concentration modulations by additive manufacturing10.1126/science.abj3770 ↗
2. Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes10.1016/j.jmst.2019.03.003 ↗
3. Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting10.1016/j.jnucmat.2015.12.034 ↗
4. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
5. Tensile properties of a nanocrystalline 316L austenitic stainless steel10.1016/j.scriptamat.2005.01.023 ↗
6. Enhanced fatigue properties of nanostructured austenitic SUS 316L stainless steel10.1016/j.actamat.2011.07.061 ↗
7. Effects of initial 3D printed microstructures on subsequent microstructural evolution in 316L stainless steel10.1016/j.actamat.2022.118481 ↗
8. The Interdependence Theory: the relationship between grain formation and nucleant selection10.1016/j.actamat.2011.04.035 ↗
9. In-situ synthesis of oxides by reactive process atmospheres during L-PBF of stainless steel
10. Grain refinement of Fe--Ti alloys fabricated by laser powder bed fusion10.1016/j.matdes.2021.109665 ↗
11. Ti-containing 316L stainless steels with excellent tensile properties fabricated by directed energy deposition additive manufacturing10.1016/j.msea.2022.144414 ↗
12. Grain refinement of 316L stainless steel through in-situ alloying with Ti in additive manufacturing10.1016/j.msea.2022.142912 ↗
13. Niobium in modern steels10.1179/095066003225008833 ↗
14. Dynamic precipitation and solute hardening in A V microalloyed steel and two Nb steels containing high levels of Mn10.1016/0001-6160(81)90092-4 ↗
15. Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design10.1557/jmr.2013.211 ↗
16. Effects of niobium and tantalum on the microstructure and strength of ferritic-martensitic steels10.1016/j.msea.2021.140900 ↗
17. Effect of niobium addition on microstructure and mechanical properties of Fe–7Al–0.35C low-density steel10.1007/s13632-020-00622-9 ↗
18. Direct observation of niobium segregation to dislocations in steel10.1016/j.actamat.2016.01.070 ↗
19. 2008
20. On the formation of “Fish-scale” morphology with curved grain interfacial microstructures during selective laser melting of dissimilar alloys10.1016/j.actamat.2021.117331 ↗
21. Front Matter · 2015 · i
22. New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion10.1016/j.actamat.2020.11.018 ↗
23. New insights into annealing induced hardening and deformation mechanisms in a selective laser melting austenitic stainless steel 316L10.1016/j.ijplas.2024.104008 ↗
24. A novel heat source model for analysis of melt Pool evolution in selective laser melting process
25. The response of dislocations, low angle grain boundaries and high angle grain boundaries at high strain rates10.1016/j.msea.2021.141704 ↗
26. Humphreys · 2004
27. The origin and formation of oxygen inclusions in austenitic stainless steels manufactured by laser powder bed fusion
28. Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L10.1016/j.jallcom.2018.01.098 ↗
29. Effect of laser shock peening on tensile properties and microstructure of selective laser melted 316L stainless steel with different build directions10.1016/j.msea.2022.143567 ↗
30. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
31. Microstructure and high temperature tensile properties of 316L fabricated by laser powder-bed fusion
32. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
33. The role of interstitial carbon atoms on the strain-hardening rate of twinning-induced plasticity steels10.1016/j.scriptamat.2019.11.047 ↗
34. Analytic model for the Orowan dislocation-precipitate bypass mechanism10.1016/j.mtla.2020.100671 ↗
35. Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys10.1016/j.scriptamat.2021.113741 ↗
36. Prediction of the δ to γ transition in austenitic stainless steels during laser treatment10.2355/isijinternational.38.71 ↗
37. Effect of solidification conditions on the solidification mode in austenitic stainless steels10.1007/BF02651615 ↗
38. Influence des conditions de solidification sur le déroulement de la solidification des aciers inoxydables austénitiques10.1016/0022-0248(88)90216-3 ↗
39. Improvement of tensile properties through Nb addition and heat treatment in additively manufactured 316L stainless steel using directed energy deposition10.1016/j.jmrt.2024.02.184 ↗
40. Simultaneously improved strength and ductility yet strain-hardenable 316L stainless steel by sigma phase and hetero-structuring10.1016/j.matdes.2024.113058 ↗
41. Thermodynamic-kinetic simulation of constrained dendrite growth in steels10.1007/s11663-000-0055-6 ↗
42. The mechanism of substructure formation and grain growth 316L stainless steel by selective laser melting10.1088/2053-1591/ac21ea ↗
43. On the origin of grain refinement and twin boundaries in as-fabricated austenitic stainless steels produced by laser powder bed fusion
44. Structure/property (constitutive and spallation response) of additively manufactured 316L stainless steel10.1016/j.actamat.2017.07.045 ↗
45. Mechanical behavior of additively manufactured and wrought 316L stainless steels before and after neutron irradiation10.1016/j.jnucmat.2021.152849 ↗
46. Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting10.1016/j.matchar.2019.110074 ↗
47. Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting10.1016/j.jmatprotec.2018.08.049 ↗
48. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
49. On the Hall-Petch relationship and substructural evolution in type 316L stainless steel10.1016/0956-7151(95)00110-H ↗
50. Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals10.1016/0001-6160(83)90007-X ↗
51. Deformation mechanism of ω-enriched Ti–Nb-based gum metal: dislocation channeling and deformation induced ω–β transformation10.1016/j.actamat.2015.08.047 ↗
52. Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
53. Real-time observations of TRIP-induced ultrahigh strain hardening in a dual-phase CrMnFeCoNi high-entropy alloy10.1038/s41467-020-14641-1 ↗
54. Bone-like crack resistance in hierarchical metastable nanolaminate steels10.1126/science.aal2766 ↗
55. Effect of laser power on anisotropic microstructure and mechanical behavior of biomedical Ti-35Nb-15Zr (at%) alloy fabricated by laser powder bed fusion10.1007/s12540-023-01494-8 ↗
56. Dislocations, grain size and planar faults in nanostructured copper determined by high resolution X-ray diffraction and a new procedure of peak profile analysis10.1016/S1359-6454(98)00001-9 ↗
57. Evaluation of the dislocation density and dislocation character in cold rolled Type 304 steel determined by profile analysis of X-ray diffraction10.1016/j.actamat.2011.03.055 ↗
58. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
59. Monocrystal‐polycrystal elastic constants of a stainless steel10.1002/pssa.2210850111 ↗
60. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
61. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
62. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗