Effects of altered hot isostatic pressing treatments on the microstructures and mechanical performance of electron beam melted Ti-6Al-4V
Source abstract
Abstract
A wide range of post process hot isostatic pressing (HIP) studies of electron beam additively manufactured Ti-6Al-4V in this research program have shown that cooling rates of 103 °C/min from temperatures above and below the beta transus produced acicular alpha-prime martensite characteristic elongations < 10%. Optimum yield strength (0.9 GPa), UTS (1.0 GPa), and elongation (∼14%) were achieved for slow cooling (at 102 °C/min) from 850 °C HIP which produced a dense, Widmanstatten alpha structure within the retained, as-fabricated columnar grains by alpha-prime decomposition. These results suggest that manipulation of AM process parameters to produce a small-grain, equiaxed microstructure, HIPed below the beta transus and slow cooled, will have a wide range of superior, isotropic mechanical properties corresponding to a Widmanstatten alpha microstructure within the equiaxed grains.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Additive manufacturing of Ti6Al4V alloy: a review
2. Additive manufacturing of metallic components: process, structure, properties10.1016/j.pmatsci.2017.10.001 ↗
3. High ductility in a fully martensitic microstructure: a paradox in a Ti alloy produced by selective laser melting10.1080/21663831.2018.1525773 ↗
4. Microstructure and mechanical properties of titanium alloys
5. Heat treatment of titanium and titanium alloys
6. Heat treatment of titanium and titanium alloys
7. In situ tailoring of microstructure in additive manufacturing of Ti-6Al-4V for superior mechanical performance10.1016/j.actamat.2016.12.027 ↗
8. Heat treatment effects on mechanical properties and microstructure evolution of Ti-6Al-4V alloy fabricated by laser powder bed fusion10.1016/j.jallcom.2019.152615 ↗
9. Selective laser melting produced Ti-6Al-4V: post-process heat treatments to achieve superior tensile properties10.3390/ma11010146 ↗
10. Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties10.1557/mrs.2016.215 ↗
11. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties10.1016/j.jallcom.2012.07.022 ↗
12. High temperature titanium alloys – a review10.1007/BF03338617 ↗
13. Titanium alloys for aerospace applications10.1002/adem.200310095 ↗
14. Heat treatment of electron beam melted (EBM) Ti-6Al-4V: microstructure to mechanical property correlations10.1108/RPJ-05-2016-0070 ↗
15. Microstructure and mechanical properties of as-built and heat-treated electron beam melted Ti-6Al-4V10.1080/02670836.2019.1580434 ↗
16. Fundamental aspects of hot isostatic pressing: an overview10.1007/s11661-000-0078-2 ↗
17. Hot isostatic pressing (HIP) to achieve microstructure and retain strength in an additive manufacturing titanium alloy (Ti-6Al-4V)10.1016/j.matlet.2019.126690 ↗
18. Metallurgy principles applied to powder bed fusion 3D printing/additive manufacturing of personalized metal and alloy biomedical implants: an overview10.1016/j.jmrt.2019.12.015 ↗
19. Murr · 2015 · 1 · 326
20. Ti-6Al-4V additively manufactured by selective laser melting with superior mechanical properties10.1016/j.actamat.2014.11.028 ↗
21. F42 Committee, “Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion,” ASTM International. Doi: 10.1520/F2924-14.10.1520/F2924-14 ↗