journal article·2020-07Open access

Bainite transformation behavior, microstructural feature and mechanical properties of nanostructured bainitic steel subjected to ausforming with different strain

Hui Guo, Qiang Li, Yaping Fan, Xianying Feng

Abstract

The interplay between ausforming strain level applied prior to austempering step and bainite transformation kinetic as well as plastic deformation mechanism of nanostructured bainitic steel was essentially investigated. The results indicated that the bainite transformation proceeded rapidly with increasing ausforming strain owing to the added heterogeneous nucleation sites and overall storage energy. Nevertheless, when the ausforming strain further increased to 40%, the acceleration effect became less pronounced attributing to the counteraction mechanism by inhibition effect of retarded bainite growth. Increasing ausforming strain could effectively refine bainite sheaves and minimize the dimension of blocky retained austenite, yet strengthen undercooled austenite, leading to a decreased volume fraction of bainitic ferrite at the termination of transformation. Ausforming strain had a positive effect on mechanical properties, particularly, the sample ausformed at 300 °C for 40% strain achieved the largest tensile strength of 1900 MPa and the best total elongation of 24%. This enhanced strength–ductility synergy mainly ascribed to the benefit of the refined bainitic ferrite lath and the increased dislocation density together with transformation induced plasticity effect. Unfortunately, the apparent variant selection brought about by ausforming could offset the increased impact toughness resulting from microstructure refinement when ausforming strain was higher than 10%, which leaded to an intensive deterioration of impact property.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Very strong low temperature bainite10.1179/026708301225000725 ↗
2. Development of hard bainite10.2355/isijinternational.43.1238 ↗
3. The first bulk nanostructured metal10.1088/1468-6996/14/1/014202 ↗
4. Atomic scale effects of alloying, partitioning, solute drag and austempering on the mechanical properties of high-carbon bainitic–austenitic TRIP steels10.1016/j.actamat.2012.07.064 ↗
5. Development of and perspective on high-performance nanostructured bainitic bearing Steel10.1016/j.eng.2018.11.024 ↗
6. Acceleration of low-temperature bainite10.2355/isijinternational.43.1821 ↗
7. Combinatorial optimization of carbide-free bainitic nanostructures10.1016/j.actamat.2012.11.040 ↗
8. The effect of prior compressive deformation of austenite on toughness property in an ultra-low carbon bainitic steel10.1016/S0254-0584(00)00379-5 ↗
9. Mechanical stabilization of austenite against bainitic reaction in Fe–Mn–Si–C bainitic steel10.2320/matertrans1989.37.579 ↗
10. Effect of plastic deformation on the formation of acicular ferrite10.1016/S0921-5093(03)00477-5 ↗
11. The effect of austenite deformation on bainite formation in an alloyed eutectoid steel10.1016/j.msea.2006.02.115 ↗
12. New insights to the effects of ausforming on the bainitic transformation10.1016/j.msea.2014.12.043 ↗
13. Effects of ausforming temperature on bainite transformation, microstructure and variant selection in nanobainite steel10.1016/j.actamat.2013.03.041 ↗
14. Effect of ausforming on nanobainite steel10.1016/j.scriptamat.2010.06.024 ↗
15. Effects of ausforming on isothermal bainite transformation behaviour and microstructural refinement in medium-carbon Si–Al-rich alloy steel10.1016/j.matdes.2014.05.024 ↗
16. Critical ausforming temperature to promote isothermal bainitic transformation in prior-deformed austenite10.1080/02670836.2019.1567663 ↗
17. Extremely high strength achievement in medium-C nanobainite steel10.1016/j.scriptamat.2018.04.005 ↗
18. Acceleration of nanobainite transformation by multi-step ausforming process10.1016/j.scriptamat.2015.05.023 ↗
19. Effect of 10% ausforming on impact toughness of nano bainite austempered at 300 °C10.1016/j.msea.2016.01.025 ↗
20. Effects of ausforming temperature on bainite transformation kinetics, microstructures and mechanical properties in ultra-fine bainitic steel10.1016/j.jmrt.2019.11.085 ↗
21. Effect of Si on the acceleration of bainite transformation by pre-existing martensite10.1016/j.actamat.2016.06.044 ↗
22. The effects of Nb and Mo addition on transformation and properties in low carbon bainitic steels10.1016/j.matdes.2015.06.133 ↗
23. Austenite films in bainitic microstructures10.1179/mst.1995.11.9.874 ↗
24. Variant selection of lath martensite and bainite transformation in low carbon steel by ausforming10.1016/j.jallcom.2011.12.111 ↗
25. Effect of Ni addition on bainite transformation and properties in a 2000 MPa grade ultrahigh strength bainitic steel10.1007/s12540-018-0139-y ↗
26. Mechanical properties of nanostructured, low temperature bainitic steel designed using a thermodynamic mode10.1016/j.msea.2010.01.080 ↗
27. Microstructures and mechanical characteristics of a medium carbon super-bainitic steel after isothermal transformation10.1007/s11665-014-1235-x ↗
28. Effect of austempering route on microstructural characterization of nanobainitic steel10.1007/s40195-013-0006-2 ↗
29. Effect of austenite grain size on transformation of nanobainite and its mechanical properties10.1016/j.msea.2016.04.041 ↗
30. Effect of magnetic field on microstructure and mechanical properties of austempered 70Si3MnCr steel10.1016/j.msea.2019.05.023 ↗
31. On structure-properties relationship in nanostructured bainitic steel subjected to the quenching and partitioning process10.1016/j.msea.2016.03.006 ↗
32. Influence of prior martensite on bainite transformation, microstructure and mechanical properties in ultra-fine bainitic steel10.3390/ma12030527 ↗
33. Unified kinetics modeling of isothermal bainite transformation in 60Si2CrA steel10.1007/s11661-018-4931-6 ↗
34. Isothermal growth kinetics of bainite in 0.5% C steels10.1016/S1359-6454(01)00316-0 ↗
35. Characterization of microstructures and tensile properties of TRIP-aided steels with different matrix microstructure10.1016/j.msea.2014.05.029 ↗
36. Mechanical stabilisation of bainite10.1179/mst.1995.11.11.1116 ↗
37. Mechanical stabilisation of austenite10.1179/174328406X86128 ↗
38. A novel thermomechanical approach to produce a fine ferrite and low-temperature bainitic composite microstructure10.1016/j.actamat.2013.08.029 ↗
39. Effects of austempering temperature on bainitic microstructure and mechanical properties of a high-C high-Si steel10.1016/j.msea.2018.11.004 ↗
40. Two-step austempering of high performance steel with nanoscale microstructure10.1016/j.msea.2017.03.104 ↗
41. Transformation kinetics and microstructural features in low-temperature bainite after ausforming process10.1016/j.matchemphys.2016.09.057 ↗
42. Effect of ausforming temperature and strain on the bainitic transformation kinetics of a low carbon boron steel10.1080/14786435.2015.1025886 ↗
43. Strength of mixtures of bainite and martensite10.1179/mst.1994.10.3.209 ↗
44. Strengthening and mechanical stability mechanisms in nanostructured bainite10.1007/s10853-013-7408-4 ↗
45. Tensile response of two nanoscale bainite composite-like structures10.1007/s11837-015-1562-x ↗
46. Microstructure evolution during tensile deformation of a nanostructured bainitic steel10.1016/j.scriptamat.2013.08.026 ↗
47. Induced martensitic transformation during tensile test in nanostructured bainitic steels10.1016/j.msea.2016.03.070 ↗
48. Tensile behaviour of a nanocrystalline bainitic steel containing 3 wt% silicon10.1016/j.msea.2012.04.031 ↗
49. In-situ observation of tensile deformation and retained austenite transformation behaviors in carbide-free bainitic steel10.1016/j.msea.2019.138637 ↗
50. Transformation behavior and microstructure feature of large strain ausformed low-temperature bainite in a medium C-Si rich alloy steel10.1016/j.msea.2016.11.073 ↗
51. Microstructural characterization of Charpy-impact-tested nanostructured bainite10.1016/j.matchar.2015.06.037 ↗
52. Synchrotron analysis of toughness anomalies in nanostructured bainite10.1016/j.actamat.2015.11.029 ↗
53. Effect of retained austenite on the fracture toughness of quenching and partitioning (Q&P)-treated sheet steels10.1007/s11661-013-2113-0 ↗
54. Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior10.1007/s11661-003-0010-7 ↗
55. Microstructure and cleavage resistance of low-carbon bainitic steels10.1179/msc.1977.11.4.123 ↗