A comparative study on the influence of mono, di, and trivalent cations on the chalcopyrite and pyrite flotation
Source abstract
Abstract
Mineral separation by flotation is a water-intensive process; thus, recycling and reusing the process-water have essential environmental and financial impacts for ore beneficiation plants. The recycled water contains different ions, which affect flotation responses. Several investigations focused on the effects of monovalent and divalent ion contents of the recycled water and seawaters on the flotation recovery. However, there is a gap in exploring the influence of trivalent ions on the metallurgical responses of sulfide flotation. This work is going to fill this gap by exploring and comparing the effect of Na+, Mg2+, and Al3+ on the chalcopyrite and pyrite's flotation responses. Different flotation experiments and surface analyses were considered to assess and compare these multivalent cations' impacts on the flotation responses. Outcomes indicated that compared to Na+ and Mg2+, Al3+ could significantly change both minerals' surface properties, relatively improved pyrite's floatability, and decreased the chalcopyrite recovery. Adsorption of Al(OH)3(s) on the minerals surface and the collector - Al(OH)3(s) aggregate could explain these variations.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Minerals Flotation and Separation Techniques · Metal Extraction and Bioleaching · Mine drainage and remediation techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. The effect of saline water on mineral flotation – a critical review10.1016/j.mineng.2014.04.017 ↗
2. The effect of sodium hydrosulfide on molybdenite flotation in seawater and diluted seawater10.1016/j.mineng.2020.106589 ↗
3. Zeta potential and viscosity of colloidal silica suspensions: effect of seawater salts, pH, flocculant, and shear rate10.1016/j.colsurfa.2017.10.080 ↗
4. Comparing the effect of salts and frother (MIBC) on gas dispersion and froth properties10.1016/j.mineng.2007.07.007 ↗
5. Copper–molybdenum ores flotation in sea water: floatability and frothability10.1016/j.mineng.2013.07.009 ↗
6. Effect of electrolytes on the flotation of copper minerals in the presence of clay minerals10.1016/j.mineng.2014.04.024 ↗
7. Effect of kerosene emulsion in MgCl2 solution on the kinetics of bubble interactions with molybdenite and chalcopyrite10.1016/j.colsurfa.2016.04.039 ↗
8. Bubble interactions with chalcopyrite and molybdenite surfaces in seawater10.1016/j.mineng.2020.106536 ↗
9. Effect of Mg 2+ and Ca 2+ as divalent seawater cations on the floatability of molybdenite and chalcopyrite10.1016/j.mineng.2016.06.023 ↗
10. A fundamental study of chalcopyrite flotation in sea water using sodium silicate10.1016/j.mineng.2019.105862 ↗
11. The interaction between cations in saline water and calcium bentonite in copper flotation
12. A fundamental study considering specific ion effects on the attachment of sulfide minerals to air bubbles10.1016/j.mineng.2020.106313 ↗
13. The fundamental roles of monovalent and divalent cations with sulfates on molybdenite flotation in the absence of flotation reagents10.1039/C8RA02690D ↗
14. Flotation kinetics of molybdenite in common sulfate salt solutions10.1016/j.mineng.2020.106182 ↗
15. Kinetic modeling and optimization of flotation process in a cyclonic microbubble flotation column using composite central design methodology10.1016/j.minpro.2016.11.006 ↗
16. Bu · 2017
17. An evaluation of hydroxamate collectors for malachite flotation10.1016/j.seppur.2017.02.056 ↗
18. Optimization of operating parameters for flotation of fine coal using a box-behnken design10.1080/19392699.2015.1009050 ↗
19. Modified flotation rate constant and selectivity index10.1016/S0892-6875(98)00005-3 ↗
20. Evaluation of l-cysteine as an eco-friendly depressant for the selective separation of MoS2 from PbS by flotation10.1016/j.molliq.2019.03.013 ↗
21. Effects of emulsified kerosene nanodroplets on the entrainment of gangue materials and selectivity index in aphanitic graphite flotation10.1016/j.mineng.2020.106592 ↗
22. Analysis of flotation rate distributions to assess erratic performances from size-by-size kinetic tests10.1016/j.mineng.2020.106229 ↗
23. An inversion approach to characterize batch flotation kinetics10.1016/j.mineng.2019.105944 ↗
24. Representation of kinetics models in batch flotation as distributed first-order reactions10.3390/min10100913 ↗
25. The order of kinetic models in coal fines flotation10.1080/19392699.2016.1140150 ↗
26. Statistical discrimination of flotation models based on batch flotation data10.1016/0301-7516(94)90020-5 ↗
27. The difference in flotation kinetics of various size fractions of bituminous coal between rougher and cleaner flotation processes10.1016/j.powtec.2016.02.004 ↗
28. Effects of simultaneous ultrasonic treatment on the separation selectivity and flotation kinetics of high-ash lignite10.1016/j.fuel.2019.116270 ↗
29. Process mineralogy as a key factor affecting the flotation kinetics of copper sulfide minerals10.1007/s12613-019-1733-9 ↗
30. Effect of slimes on the flotation recovery and kinetics of coal particles10.1016/j.fuel.2018.02.003 ↗
31. Discrimination of six flotation kinetic models used in the conventional flotation and carrier flotation of −74 μm coal fines10.1021/acsomega.0c01116 ↗
32. Estimating bubble loading in industrial flotation cells10.3390/min9040222 ↗
33. Enhancing flotation performance of low rank coal by improving its hydrophobicity and the property of oily bubbles using 2-ethylhexanol10.1016/j.minpro.2017.07.014 ↗
34. Differences in dry and wet grinding with a high solid concentration of coking coal using a laboratory conical ball mill: breakage rate, morphological characterization, and induction time10.1016/j.apt.2019.08.016 ↗
35. A comprehensive review of experimental studies of nanoparticles-stabilized foam for enhanced oil recovery10.1016/j.petrol.2018.01.035 ↗
36. Effects of monovalent and divalent ions in coal gasification brine on the froth entrainment and flotation kinetics of anthracite coal10.37190/ppmp/127501 ↗
37. Effect of pH on surface hydration of coal particles and its attachment with oily bubbles in flotation
38. Improving fine molybdenite flotation using a combination of aliphatic hydrocarbon oil and polycyclic aromatic hydrocarbon10.1016/j.rinp.2018.12.010 ↗
39. Shafer L, Striebich R, Gomach J, Edwards T, Chemical class composition of commercial jet fuels and other specialty kerosene fuels, in 14th AIAA/AHI space planes and hypersonic systems and technologies conference.
40. Addition of two kerosene-based fuels to diesel–biodiesel fuel: effect on combustion, performance and emissions characteristics of CI engine10.1016/j.fuel.2020.117473 ↗
41. Effect of calcium ions and citric acid on the flotation separation of chalcopyrite from galena using dextrin10.1016/S0892-6875(00)00122-9 ↗
42. Role of biosolids on hydrophobic properties of sulfide ores10.1016/j.minpro.2011.05.009 ↗
43. Interfacial electrochemistry of pyrite oxidation and flotation: II. FTIR studies of xanthate adsorption on pyrite surfaces in neutral pH solutions10.1006/jcis.1995.1198 ↗
44. Zeta potential of microbubbles in aqueous solutions: electrical properties of the gas-water interface10.1021/jp0445270 ↗
45. Reversal of bubble charge in multivalent inorganic salt solutions—effect of magnesium10.1016/0021-9797(91)90018-4 ↗
46. Measurement of the zeta potential of gas bubbles in aqueous solutions by microelectrophoresis method10.1006/jcis.2001.7842 ↗
47. Influence of electrical double-layer interaction on coal flotation10.1006/jcis.2002.8367 ↗
48. The joint action of saline water and flotation reagents in stabilizing froth in coal flotation10.1016/j.minpro.2016.01.005 ↗
49. The interaction of clay minerals and saline water in coarse coal flotation10.1016/j.fuel.2014.05.085 ↗