journal article·2022-03Open access

Diffusion bonding of dissimilar titanium alloys via surface nanocrystallization treatment

Lian Li, Lixing Sun, Miaoquan Li

Abstract

A TC17 titanium (Ti) alloy, with and without surface nanocrystallization (SN) treatment was joined to another Ti alloy, TC4, via solid-state diffusion bonding. The interfacial void shrinkage of SN-TC17/TC4 bond was accelerated comparing with that of coarse-grained TC17/TC4 bond. Dynamic recovery and recrystallization were mainly responsible for the fiber texture in β phase and the random orientation in α phase on SN-TC17 side, respectively. The promoted grain growth effect on SN-TC17 side at 1093 K contributed to the disappearance of original bond line (BL). The shear strength of SN-TC17/TC4 bond increased as bonding temperature increased to 1013 K due to the enhanced void shrinkage process, which further increased up to 789 MPa at 1093 K as a result of the disappearance of original BL. Moreover, the shear strength of SN-TC17/TC4 bond at 1093 K was about 60 MPa higher than that of TC17/TC4 bond due to the disappearance of original BL and the Hall–Petch strengthening effect.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. High-strength vacuum diffusion bonding of Cu-plated, sandblasted W and CuCrZr alloy10.1016/j.jmrt.2021.11.069 ↗
2. Interfacial microstructure evolution and formation process of the joints prepared by diffusion bonding on DD6 nickel-based single crystal superalloy10.1016/j.jmrt.2020.11.083 ↗
3. High strength Mo/Ti6Al4V diffusion bonding joints: interfacial microstructure and mechanical properties10.1016/j.ijrmhm.2019.04.009 ↗
4. Low temperature diffusion bonding of Ti-6Al-4V and duplex stainless steel10.1016/j.jmatprotec.2016.03.013 ↗
5. Experimental investigations on the kinetics of void shrinkage in solid state bonding of AA6061 at high temperatures and high pressures10.1016/j.matdes.2015.10.102 ↗
6. Diffusion bonding of copper alloy to nickel-based superalloy: effect of heat treatment on the microstructure and mechanical properties of the joints10.1080/13621718.2021.1882653 ↗
7. Influence of applied electric field on atom diffusion behavior and mechanism for W/NiFe interface in diffusion bonding of Steel/NiFe interlayer/W by spark plasma sintering10.1016/j.apsusc.2020.148516 ↗
8. Diffusion bonding W and RAFM-steel with an Fe interlayer by hot isostatic pressing10.1016/j.fusengdes.2020.111796 ↗
9. Titanium alloy production technology, market prospects and industry development10.1016/j.matdes.2010.09.011 ↗
10. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
11. Diffusion bonding of copper to titanium using CoCrFeMnNi high-entropy alloy interlayer10.1016/j.intermet.2020.107027 ↗
12. Interfacial reactions and strength properties in dissimilar titanium alloy/Ni alloy/microduplex stainless steel diffusion bonded joints10.1016/j.msea.2012.09.069 ↗
13. Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer10.1016/j.matchar.2012.03.016 ↗
14. A fatigue assessment of dissimilar titanium alloy diffusion bonds10.1016/j.ijfatigue.2004.11.004 ↗
15. Surface nanocrystallization of β-titanium alloy by ultrasonic shot peening
16. Effect of surface nanocrystallization on the corrosion behavior of Ti-6Al-4V titanium alloy10.1016/j.surfcoat.2013.02.052 ↗
17. Hot corrosion behavior of Ti-6Al-4V modified by ultrasonic shot peening10.1016/j.matdes.2016.07.133 ↗
18. Hot corrosion behavior of TC11 titanium alloy treated by laser shock processing10.1016/j.apsusc.2013.07.017 ↗
19. Surface nanocrystallization and property of Ti6Al4V alloy induced by high pressure surface rolling10.1016/j.surfcoat.2016.01.043 ↗
20. Fretting fatigue characteristics of Ti-6Al-4V alloy with a gradient nanostructured surface layer induced by ultrasonic surface rolling process10.1016/j.ijfatigue.2019.03.042 ↗
21. Nitriding iron at lower temperature10.1126/science.1080216 ↗
22. Nanocrystalline metals crystallized from amorphous solids: nanocrystallization, structure, and properties10.1016/0927-796X(95)00187-5 ↗
23. An investigation on diffusion bonding of Cu/Cu using various grain size of Ni interlayers at low temperature10.1016/j.mtla.2020.100882 ↗
24. Enhancement in microstructural and mechanical performance of AA7075 aluminum alloy via severe shot peening and ultrasonic nanocrystal surface modification10.1016/j.apsusc.2020.146922 ↗
25. Thermal stability and microstructure evolution in nanocrystalline Ti-5Al-2Sn-2Zr-4Mo-4Cr - a HRTEM study10.1016/j.jallcom.2017.04.303 ↗
26. Dynamic globularization and restoration mechanism of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy during isothermal compression10.1016/j.jallcom.2014.10.043 ↗
27. Mullins · 1963
28. Modeling of void closure in diffusion bonding process based on dynamic conditions10.1007/s11431-012-4927-1 ↗
29. Elucidating microstructural evolution and strengthening mechanisms in nanocrystalline surface induced by surface mechanical attrition treatment of stainless steel10.1016/j.actamat.2016.09.041 ↗
30. High-pressure torsion of titanium at cryogenic and room temperatures: grain size effect on allotropic phase transformations10.1016/j.actamat.2014.01.037 ↗
31. A simple mechanical model for grain boundary sliding in nanocrystalline metals10.1016/j.msea.2011.10.086 ↗
32. Grain sliding, triple junction disclinations and strain hardening in ultrafine-grained and nanocrystalline metals10.1016/j.ijplas.2017.05.005 ↗
33. Diffusion bonding of superplastic 7075 aluminum alloy10.1016/S0921-5093(98)00958-7 ↗
34. Humphreys · 2004
35. Dynamic recovery and recrystallization in titanium alloys by hot deformation10.1007/s11837-007-0013-8 ↗
36. Deformation mechanisms in the near-β titanium alloy Ti-5553110.1007/s11661-013-2073-4 ↗
37. The influence of the dynamic softening mechanism of α phase and γ phase on remnant lamellae during hot deformation10.1016/j.jallcom.2021.159514 ↗
38. Engler · 2010
39. Microstructure and mechanical property evaluation of diffusion-bonded joints made between SAE 2205 steel and AISI 1035 steel10.1016/j.matdes.2011.09.063 ↗
40. Microstructure evolutions and interfacial bonding behavior of Ni-based superalloys during solid state plastic deformation bonding10.1016/j.jmst.2019.11.015 ↗
41. Hall-Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗