Development of high thermal conductivity, enhanced strength and cost-effective die-cast Mg alloy compared with AE44 alloy
Source abstract
Abstract
The thermal conductivity (TC) and strength trade-off has been a long-standing dilemma for developing high TC alloys. Here a novel high TC and cost-effective die-cast Mg2.8Al3.8La0.4Nd alloy was developed with enhanced yield strength (YS) at room temperature (RT) and high temperatures (HT), compared with the commercially widely used die-cast AE44 magnesium alloy. The new alloy provided the TC of 104.0 and 125.9 W/(m·K) separately at RT and 300 °C. Compared with AE44 alloy, the TC was improved by ∼13.5%. The new alloy also delivered an excellent YS of 137.1 MPa, ultimate tensile strength (UTS) of 240.2 MPa and elongation of 8.8% at RT, and the YS of the new ally was enhanced by 6.3% at RT and 9.8% at 300 °C, compared with AE44 alloy. The new alloy only has a 1.3% increase in raw material cost compared with AE44 alloy, offering a relatively cost-effective alternative. The lamellar (Al,Mg)3RE and Al11RE3, the needle-like Al2.12RE0.88 and the blocky Al10RE2Mn7 intermetallic phases were identified. With the optimizing addition of Al and La, the Al solute amount in the matrix was reduced remarkably by 42% and then contributed to the improvement of TC. The major (Al,Mg)3RE phase at grain boundaries (GBs) contributed heavily to the enhancement of YS. This study elucidates the importance of the transfer of Al from the matrix to form higher content and novel Al-based intermetallic phases at GBs, for achieving die-cast Mg-Al-based alloys with excellent TC and strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A review on thermal conductivity of magnesium and its alloys10.1016/j.jma.2019.08.002 ↗
2. Materials science. Weight loss with magnesium alloys10.1126/science.1182848 ↗
3. Magnesium casting technology for structural applications10.1016/j.jma.2013.02.002 ↗
4. On the exceptional creep resistance in a die-cast Gd-containing Mg alloy with Al addition10.1016/j.actamat.2022.117957 ↗
5. A new die-cast magnesium alloy for applications at higher elevated temperatures of 200–300 °C10.1016/j.jma.2020.09.012 ↗
6. Alloying behavior of magnesium and alloy design
7. A quantitative strategy for achieving the high thermal conductivity of die-cast Mg-Al-based alloys10.1016/j.mtla.2022.101426 ↗
8. Processing of SiC nano-reinforced AlSi9Cu3 composites by stir mixing, ultrasonication and high pressure die casting10.1016/j.jmrt.2022.03.132 ↗
9. Effect of electromagnetic transport process on the improvement of hydrogen porosity defect in A380 aluminum alloy10.1016/j.ijhydene.2015.05.160 ↗
10. Thermal and electrical conductivity of binary magnesium alloys10.1007/s10853-013-8012-3 ↗
11. Microstructure and thermal conductivity of as-cast and as-solutionized Mg–rare earth binary alloys10.1016/j.jmst.2016.08.026 ↗
12. Effect of solute atoms and second phases on the thermal conductivity of Mg-RE alloys: a quantitative study10.1016/j.jallcom.2018.03.070 ↗
13. Electrical and thermal conductivity in Mg-5Sn Alloy at different aging status10.1016/j.matdes.2015.06.110 ↗
14. Coupling analysis of the electromagnetic transport of liquid aluminum alloy during casting10.1016/j.jmatprotec.2015.02.033 ↗
15. Effects of precipitates and its interface on thermal conductivity of Mg-12Gd alloy during aging treatment10.1016/j.matchar.2018.02.019 ↗
16. Simultaneous achievement of high thermal conductivity, high strength and formability in Mg-Zn-Ca-Zr sheet alloy10.1080/21663831.2020.1759718 ↗
17. Microstructure and thermal conductivity of as-cast and as-extruded binary Mg-Mn alloys10.1080/02670836.2016.1161130 ↗
18. Recent magnesium alloy development for elevated temperature applications10.1179/095066004225010497 ↗
19. The role and significance of Magnesium in modern day research-A review10.1016/j.jma.2021.05.012 ↗
20. Effects of heat treatment on the thermal properties of AZ91D magnesium alloys in different casting processes10.1016/j.jallcom.2018.06.370 ↗
21. Physical metallurgy
22. Meridian. Lightweight alloys 2022. https://www.meridian-mag.com/magnesium-die-casting/lightweight-alloys/(accessed November 23, 2022).
23. High strength and ductility aluminium alloy processed by high pressure die casting10.1016/j.jallcom.2018.09.260 ↗
24. Effect of Nd on the microstructure and mechanical properties of Mg-La-Ce alloys at ambient and elevated temperatures10.1007/s11665-021-06494-6 ↗
25. Effect of Zn/Ga ratio on damping and thermal behaviors of fine-grained Mg-Zn-Ga sheets10.1007/s11665-022-06605-x ↗
26. La-Mg (Lanthanum-Magnesium)10.1007/s11669-012-0166-1 ↗
27. A magnesium alloy and a high performance magnesium cylinder made from the magnesium alloy
28. Microstructural characterization of a die-cast magnesium-rare earth alloy10.1016/S1359-6462(01)01179-4 ↗
29. The relationship between microstructure and creep resistance in die-cast magnesium–rare earth alloys10.1016/j.scriptamat.2010.02.005 ↗
30. Effect of Gd on the microstructure and mechanical properties of high-pressure die-cast Mg-La-Ce alloys at ambient and elevated temperatures
31. Revisiting the intermetallic phases in high-pressure die-cast Mg-4Al-4Ce and Mg-4Al-4La alloys10.1016/j.matchar.2019.109839 ↗
32. (Al,Mg)3La: a new phase in the Mg-Al-La system10.1107/S205252061800834X ↗
33. Structure stability and mechanical properties of high-pressure die-cast Mg-Al-La-Y-based alloy10.1016/j.msea.2011.10.025 ↗
34. Age hardening in die-cast Mg-Al-RE alloys due to minor Mn additions10.1016/j.msea.2016.01.012 ↗
35. Microstructure of a pressure die cast magnesium—4wt.% aluminium alloy modified with rare earth additions10.1016/0921-5093(95)10035-0 ↗
36. Effect of Nd content and heat treatment on the thermal conductivity of Mg Nd alloys10.1016/j.jallcom.2016.05.261 ↗
37. Relative importance of grain boundaries and size effects in thermal conductivity of nanocrystalline materials10.1038/srep07037 ↗
38. High performance gravity cast Al9Si0.45Mg0.4Cu alloy inoculated with AlB 2 and TiB 210.1016/j.jmatprotec.2017.10.028 ↗
39. High as-cast strength die-cast AlSi9Cu2Mg alloy prepared by nanoparticle strengthening with industrially acceptable ductility10.1016/j.jallcom.2020.156873 ↗
40. Microstructure and strengthening mechanisms of a cast Mg-1.48Gd-1.13Y-0.16Zr (at.%) alloy10.1007/s10853-009-3672-8 ↗
41. Multi-component solid solution hardening10.1007/BF00540988 ↗
42. Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys10.1016/j.jallcom.2009.02.131 ↗
43. Solid solution strengthening in concentrated Mg-Al alloys10.1016/S1471-5317(01)00008-6 ↗
44. Effects of Gd solutes on hardness and yield strength of Mg alloys10.1016/j.pnsc.2018.10.002 ↗
45. Modeling the precipitation processes and strengthening mechanisms in a Mg-Al-(Zn) AZ91 alloy10.1007/s11661-005-0330-x ↗
46. Effects of Mn addition on the microstructure and mechanical properties of Mg-Zn-Sn alloys10.1016/j.msea.2020.138933 ↗
47. Strengthening mechanisms of indirect-extruded Mg-Sn based alloys at room temperature10.1016/j.jma.2014.11.003 ↗
48. Re-evaluation of the mechanical properties and creep resistance of commercial magnesium die-casting alloy AE4410.1016/j.jma.2021.04.016 ↗
49. Detailed structures and formation mechanisms of well-known Al10RE2Mn7 phase in die-cast Mg-4Al-4RE-0.3Mn alloy10.1007/s40195-018-0819-0 ↗