journal article·2023-03Open access

Preparation of TiCl4 from panzhihua ilmenite concentrate by boiling chlorination

Fuxing Zhu, Shangrun Ma, Zhanshan Ma, Lihua Qi, Weixing Peng, Kaihua Li, Kehui Qiu

Abstract

Titanium tetrachloride (TiCl4) is an important raw material for preparing metallic Ti and TiO2. At present, TiCl4 is mainly produced through boiling chlorination and molten salt chlorination. However, the quality of the titanium slag (or rutile) is significantly influenced by the preparation method. The content of Ca and Mg impurities in Panzhihua ilmenite is high, and the titanium slag after smelting is suitable for the production of TiCl4 via molten salt chlorination. However, chlorinated waste salt pollutes the environment, which should be avoided to meet sustainability goals. Herein, a novel process for preparing TiCl4 from Panzhihua ilmenite involving boiling chlorination is proposed. The carbothermal reduction of the ilmenite concentrate, acid leaching separation of the reduced products, and boiling chlorination process were investigated via X-ray diffraction, mineral dissociation analysis, scanning electron microscopy, and energy-dispersive spectroscopy. The reduced products, which are rich in titanium oxycarbide, Ti2O3 and iron, were prepared after reacting at 1550 °C for 3 h. The Fe content in the reduced products was reduced from 37.85 to 3.0 wt % after leaching with 1–5 wt. % hydrochloric acid. The obtained acid insoluble substances were chlorinated at 500 °C for 25 min to prepare TiCl4, resulting in a chlorination rate of 77.4%. The chlorination residue is rich in unchlorinated rutile, which can be recovered by repeating the boiling chlorination process. Therefore, the environmentally friendly boiling chlorination of Panzhihua ilmenite can be used to prepare TiCl4 avoiding the waste of chlorinated salt.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Iron and Steelmaking Processes · Extraction and Separation Processes · Metal Extraction and Bioleaching

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. A new, energy-efficient chemical pathway for extracting Ti metal from Ti minerals10.1021/ja408118x ↗
2. Ionic liquid-assisted synthesis of large-scale TiO2 nanoparticles with controllable phase by hydrolysis of TiCl410.1021/nn800713w ↗
3. Environmental impacts analysis of titanium sponge production using Kroll process in China10.1016/j.jclepro.2017.09.240 ↗
4. Entrained-flow chlorination of titaniferous slag to produce titanium tetrachloride10.1007/s11663-001-0022-x ↗
5. Behavior of magnesium impurity during carbochlorination of magnesium-bearing titanium slag in chloride media10.1016/j.jmrt.2021.04.072 ↗
6. Composition of off-gas produced by combined fluidized bed chlorination for preparation of TiCl410.1016/S1003-6326(09)60109-6 ↗
7. The conversion of calcium-containing phases and their separation with NaCl in molten salt chlorinated slags at high temperature
8. Chlorination behavior of low-grade titanium slag in AlCl3-NaCl molten salt10.1007/s11837-021-05014-0 ↗
9. Graphene from amorphous titanium carbide by chlorination under 200°C and atmospheric pressures10.1038/srep05494 ↗
10. Chlorination kinetics of titanium nitride for production of titanium tetrachloride from nitrided ilmenite10.1007/s11663-017-1011-z ↗
11. Ratso S, Kruusenberg I, Kaarik M, Kook M, Saar R, Pars M, Leis J, Tammeveski K. Highly efficient nitrogen-doped carbide-derived carbon materials for oxygen reduction reaction in alkaline media. Carbon 2107; 113: 159-169. https://doi.org/10.1016/j.carbon.2016.11.037.10.1016/j.carbon.2016.11.037 ↗
12. Carbothermal reduction of ilmenite concentrates and synthetic rutile in different gas atmospheres
13. Effect of gas atmosphere on carbothermal reduction and nitridation of titanium dioxide10.1007/s11663-011-9574-6 ↗
14. Chlorination of reduced ilmenite concentrates and synthetic rutile10.1016/j.minpro.2011.07.005 ↗
15. Chlorination of titanium oxycarbonitride produced by carbothermal nitridation of rutile10.1021/ie801160w ↗
16. Carbothermal reduction and nitridation of titanium dioxide in a H2-N2 gas mixture10.1111/j.1551-2916.2011.04703.x ↗
17. Determination of dielectric properties of titanium carbide fabricated by microwave synthesis with Ti-bearing blast furnace slag10.1007/s12613-020-1985-4 ↗
18. Novel process for deep removal of chlorine and recycling of chlorinated tailings from titanium-bearing blast-furnace slag10.1016/j.psep.2022.01.056 ↗
19. Transformation of Ti-bearing mineral in Panzhihua electric furnace titanium slag during oxidation roasting process10.1007/s10973-017-6675-8 ↗
20. Comprehensive utilization of complex titania ore
21. A new process for comprehensive utilization of complex titania ore10.1016/j.mineng.2005.10.002 ↗
22. A literature review of titanium metallurgical processes10.1016/j.hydromet.2011.04.005 ↗
23. Preparation of synthetic rutile by hydrochloric acid leaching of mechanically activated Panzhihua ilmenite10.1016/j.hydromet.2007.11.013 ↗
24. A novel method of synthesis and investigation on transformation of synthetic rutile powders from Panzhihua sulphate titanium slag using microwave heating10.1016/j.powtec.2017.10.020 ↗
25. Chlorination of titanium oxycarbide produced by carbothermal reduction of rutile10.1007/s11663-007-9117-3 ↗
26. Preparation of titanium oxycarbide from various titanium raw materials: Part I. Carbothermal reduction10.1007/s12598-010-0166-4 ↗
27. Purification and phase evolution mechanism of titanium oxycarbide (TiCxOy) produced by the thermal reduction of ilmenite10.3390/min11020104 ↗
28. Spectrophotometric and inductively coupled plasma atomic emission spectrometric determination of titanium in ilmenites after rapid dissolution with phosphoric acid10.1016/S0039-9140(96)02026-7 ↗
29. Elemental recoveries for clay minerals analysed by inductively coupled plasma atomic emission spectrometry using slurry nebulisation10.1039/ja9900500515 ↗
30. The electronic structures of magnesium-bearing anosovite (MgnTi3-nO5 0≤n≤1) and its response to flotation10.1016/j.jallcom.2017.03.072 ↗
31. A thermodynamic model for non-stoichiometric cementite; the Fe-C phase diagram10.1016/j.calphad.2015.10.014 ↗
32. Kinetics of hydrochloric acid leaching of titanium from titanium-bearing electric furnace slag10.1007/s11837-015-1808-7 ↗
33. Thermodynamic consideration of the removal of iron from titanium ore by selective chlorination10.1007/s11663-014-0061-8 ↗
34. Vaporization model of MgCl2-CaCl2 binary melts in fluidized bed10.1016/j.cjche.2016.07.001 ↗
35. Dissolution of primary minerals of basalt in natural waters: І. calculation of mineral solubilities from 0 °C to 350 °C Chemical Geology10.1016/S0009-2541(00)00263-1 ↗
36. Bubble attachment time and FTIR analysis of water structure in the flotation of sylvite, bischofite and carnallite10.1016/j.mineng.2010.10.006 ↗
37. New insights into the solid-state hydrogen storage of nanostructured LiBH4-MgH2 system
38. Investigation on chloridizing 74% titanium slag in molten salts
39. Analysis of process of melting salt chlorination with titanium slag in Panzhihua
40. Modelling of an ilmenite-smelting DC arc furnace process10.1016/j.mineng.2005.06.016 ↗
41. Momentum transfer from arc to slag bath in a dc ilmenite smelting furnace: a computational analysis10.1007/s11837-021-04792-x ↗
42. Development of high-temperature and low-oxygen atmosphere controlled furnace and its application to metal jointing Technology10.1299/jamdsm.1.763 ↗
43. Coagulation characteristics of titanium (Ti) salt coagulant compared with aluminum (Al) and iron (Fe) salts10.1016/j.jhazmat.2010.10.084 ↗
44. Management of solid waste marble powder: improving quality of sodium chloride obtained from sulphate-rich lake/subsoil brines with simultaneous recovery of high-purity gypsum and magnesium carbonate hydrate10.1007/s11356-022-18932-6 ↗
45. A novel recycling approach for efficient extraction of titanium from high-titanium-bearing blast furnace slag10.1016/j.wasman.2020.10.024 ↗