Optimization of single-pass geometric characteristics of IN718 by fiber laser via linear regression and response surface methodology
Source abstract
Abstract
Direct laser deposition is among the critical processes for fabricating and reconstructing parts. This study investigated a single-pass laser coating of Inconel 718 superalloy powder on the same substrate using a continuous fiber laser. The linear regression method was used to establish the relationship between the main process parameters, including laser power (P), laser scanning speed (V), and powder feeding rate (F), as well as geometric characteristics of the single-pass cladding including width, height, dilution percentage, and single-pass wetting angle. In addition, drawing process maps by two methods of linear regression and the response surface method was investigated comprehensively. The results showed that the width of a single pass was directly related to the laser power and inversely related to the laser scanning speed. In addition, this parameter has a negligible association with the powder feeding rate. Furthermore, it was found that the height of a single pass has a direct and inverse relationship with the powder feeding rate and the laser scanning speed, respectively, but poorly correlated with the laser power. Dilution was directly and inversely related to laser scanning speed and powder feeding rate, respectively, while the trend was quite the opposite for the wetting angle.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Laser Material Processing Techniques · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Durand-Charre · 2017
2. Donachie · 2002
3. Reed · 2008
4. Advanced materials for laser surface cladding: processing, manufacturing, challenges and prospects10.1002/9781119580546.ch14 ↗
5. Nd: YAG laser cladding of Co–Cr–Mo alloy on γ-TiAl substrate10.1016/j.optlastec.2016.01.003 ↗
6. An empirical-statistical model for coaxial laser cladding of NiCrAlY powder on Inconel 738 superalloy10.1016/j.optlastec.2016.06.014 ↗
7. An empirical-statistical model for laser cladding of WC-12Co powder on AISI 321 stainless steel10.1016/j.optlastec.2017.06.026 ↗
8. Empirical-statistical modeling and prediction of geometric characteristics for laser-aided direct metal deposition of Inconel 718 superalloy10.1007/s12540-019-00355-7 ↗
9. Analysis and prediction of single laser tracks geometrical characteristics in coaxial laser cladding process10.1016/j.optlaseng.2011.10.014 ↗
10. Process parameter optimization of laser clad iron-based alloy: predictive models of deposition efficiency, porosity, and dilution10.1016/j.surfcoat.2018.05.054 ↗
11. Analysis and modeling of melt pool morphology for high power diode laser cladding with a rectangle beam spot10.1016/j.optlaseng.2018.05.022 ↗
12. Study on process optimization of WC-Co50 cermet composite coating by laser cladding10.1016/j.ijrmhm.2019.105133 ↗
13. An empirical-statistical model for laser cladding of Ti-6Al-4V powder on Ti-6Al-4V substrate10.1016/j.optlastec.2017.10.015 ↗
14. Multi-objective numerical simulation of geometrical characteristics of laser cladding of cobalt-based alloy based on response surface methodology10.1177/0020294020944955 ↗
15. Investigation of powder fed laser cladding of NiCr-chromium carbides single-tracks on titanium aluminide substrate10.1016/j.optlastec.2019.105652 ↗
16. Process optimization of laser cladding Ni60A alloy coating in remanufacturing10.1016/j.optlastec.2019.105718 ↗
17. Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel10.1016/j.optlastec.2017.09.010 ↗
18. An investigation on the parameter optimization and abrasive wear behavior of nanostructured WC-10Co-4Cr TIG weld cladding10.1016/j.surfcoat.2020.125474 ↗
19. A methodology for investigating and modeling laser clad bead geometry and process parameter relationships10.4271/2014-01-0737 ↗
20. Experimental research and multi-response multi-parameter optimization of laser cladding Fe31310.1016/j.optlastec.2018.06.030 ↗
21. Laser cladding of nanoparticle TiC ceramic powder: effects of process parameters on the quality characteristics of the coatings and its prediction model10.1016/j.optlastec.2019.03.048 ↗
22. Mahamood · 2018