Effect of extrusion temperature on microstructure, mechanical properties, and deformation mechanism of Mg-2.5Er-0.6Zr alloy
Source abstract
Abstract
Different extrusion temperatures (350 °C, 380 °C, 410 °C) were used to forward extrude the cast Mg-2.5Er-0.6Zr (wt.%) alloy. The effects of extrusion temperature on the microstructure, mechanical properties, deformation texture and extrusion deformation mechanism of Mg-2.5Er-0.6Zr alloy were studied by OM, SEM, room temperature tensile test, EBSD and IGMA analysis. The results show that the cast alloy has coarse grains and exhibits random texture characteristics. After extrusion, the alloy underwent dynamic recrystallization (DRX), and the equiaxed grains were refined, forming a special rare earth texture, and the mechanical properties of the alloy were greatly improved. In the temperature range of 380 °C–410 °C, with the increase of extrusion temperature, the alloy grain coarsing, strength and plasticity gradually decrease, but it is still much higher than the cast alloy. Under the combined influence of fine grain strengthening, texture weakening and diversified plastic deformation modes, the comprehensive mechanical properties of extruded Mg-2.5Er-0.6Zr alloy are the best at 380 °C, and its ultimate tensile strength, tensile yield strength and elongation are 218.7 MPa, 184.2 MPa and 44.1%, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Weight loss with magnesium alloys[J]10.1126/science.1182848 ↗
2. Research advances in magnesium and magnesium alloys worldwide in 2020[J]10.1016/j.jma.2021.04.001 ↗
3. Magnesium: properties—applications—potential[J]10.1016/S0921-5093(00)01351-4 ↗
4. Magnesium extrusion alloys: a review of developments and prospects[J]10.1080/09506608.2017.1421439 ↗
5. Improved microstructures of AZ31 magnesium alloy by semi-solid extrusion[J]10.1016/j.msea.2020.140204 ↗
6. What is going on in magnesium alloys?[J]10.1016/j.jmst.2017.07.019 ↗
7. A review on thermal conductivity of magnesium and its alloys[J]10.1016/j.jma.2019.08.002 ↗
8. Improving ductility of a Mg alloy via non-basal< a> slip induced by Ca addition[J]10.1016/j.ijplas.2019.04.020 ↗
9. Effect of dynamic recrystallization on grain refinement during interactive alternating forward extrusion of AZ31B magnesium alloy[J]10.1007/s11665-020-04780-3 ↗
10. Slip mode dependency of dislocation shearing and looping of precipitates in Mg alloy WE43[J]10.1016/j.actamat.2017.12.043 ↗
11. Effect of Y and Gd content on the microstructure and mechanical properties of Mg–Y–RE alloys[J]10.1016/j.jma.2019.03.002 ↗
12. Influence of extrusion conditions on microstructure and mechanical properties of Mg-2Gd-0.3Zr magnesium alloy[J]10.1016/j.jma.2020.06.019 ↗
13. The effect of Gd on the recrystallisation, texture and deformation behaviour of magnesium-based alloys[J]10.1016/j.actamat.2010.09.003 ↗
14. Improved mechanical performance of double-pass extruded Mg-Gd-Er-Zr alloys with various rare earth contents[J]10.1016/j.msea.2022.142922 ↗
15. Influence of cerium on the texture and ductility of magnesium extrusions[J]10.1016/j.scriptamat.2008.05.019 ↗
16. The role of atomic scale segregation in designing highly ductile magnesium alloys[J]10.1016/j.actamat.2016.06.024 ↗
17. A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys[J]10.1007/s10853-016-0371-0 ↗
18. Rare earth texture and improved ductility in a Mg-Zn-Gd alloy after high-speed extrusion[J]10.1016/j.msea.2016.04.093 ↗
19. Comparative in vitro study on binary Mg-RE (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) alloy systems[J]10.1016/j.actbio.2019.11.013 ↗
20. The quasi-static mechanical properties of extruded binary Mg–Er alloys[J]10.1016/j.msea.2013.02.048 ↗
21. Influence of Er addition and extrusion temperature on the microstructure and mechanical properties of a Mg–Zn–Zr magnesium alloy[J]10.1016/j.msea.2011.03.010 ↗
22. Effects of Zr addition on the multi-scale second-phase particles and fracture behavior for Mg-3Gd-1Zn alloy[J]10.1016/j.jallcom.2018.02.328 ↗
23. Effect of rare earth erbium on microstructure and mechanical properties of A356 aluminum alloy[J]
24. Effects of mini Zr, Er, Y on microstructures of cast Al-Zn-Mg-Cu alloy[J]
25. Effects of Er on the microstructure and mechanical properties of as cast Al-Mg-Mn-Zn-Sc-Zr-(Ti) filler metals[J]
26. Research on rare earth in aluminum [J]10.4028/www.scientific.net/MSF.396-402.1731 ↗
27. Study on the erbium strengthened aluminum alloy[J]10.4028/www.scientific.net/MSF.546-549.623 ↗
28. Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying[J]10.1016/j.jma.2020.08.016 ↗
29. Microstructure and mechanical properties of Mg–Zn–(Nd)–Zr alloys with different extrusion processes[J]10.1007/s12598-016-0797-1 ↗
30. Effect of extrusion ratio on microstructure, texture and mechanical properties of indirectly extruded Mg–Zn–Ca alloy[J]10.1016/j.msea.2013.01.052 ↗
31. Dynamic tensile properties and microstructural evolution of extruded EW75 magnesium alloy at high strain rates[J]10.1016/j.jma.2020.02.013 ↗
32. A high strength Mg-6Zn-1Y-1Ce alloy prepared by hot extrusion[J]10.1007/s11595-013-0701-x ↗
33. Development of extraordinary high-strength Mg–8Al–0.5 Zn alloy via a low temperature and slow speed extrusion[J]10.1016/j.msea.2014.05.058 ↗
34. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes[J]10.1007/s11661-010-0410-4 ↗
35. Effect of grain boundaries on texture formation during dynamic recrystallization of magnesium alloys[J]10.1016/j.actamat.2017.01.063 ↗
36. Microstructure and mechanical properties with various pre-treatment and Zn content in Mg-Gd-Y-Zn alloys[J]10.1016/j.jallcom.2020.154873 ↗